JOOFO Remote Control User Manual

giriiş

This manual provides essential instructions for setting up, operating, and maintaining your JOOFO Remote Control. This remote is specifically designed for JOOFO 30W/2400LM 3 Color Temperatures Floor Lamps. Please read this manual thoroughly before use to ensure proper functionality and safety.

Paket İçeriği

• 1 x JOOFO Remote Control
• 2 x 23A 12V Batteries
• 1 x Kullanım Kılavuzu

Kurmak

1. Pil Kurulumu

The remote control comes with two 23A 12V batteries. Before first use, ensure that any thin plastic covering the battery is removed. Open the battery compartment, insert the batteries according to the polarity markings, and close the compartment.

2. Pairing the Remote Control with Your Floor Lamp

Follow these steps to pair your new remote control with your JOOFO floor lamp:

1. Unplug the Floor Lamp: Disconnect the floor lamp from its power outlet.
2. Press and Hold Power Button: On the remote control, press and hold the power button.
3. Plug in the Floor Lamp: While still holding the power button on the remote, plug the floor lamp back into the power outlet.
4. Wait for Light to Turn On: Continue holding the power button until the floor lamp aydınlatır.
5. Release Power Button: Once the light turns on, release the power button. The remote is now paired with your lamp.

Not: If pairing is unsuccessful, repeat the steps. Ensure the plastic battery cover is removed.

Figure 1: Visual guide for pairing the remote control.

Kullanım Talimatları

Uzaktan Kumanda Fonksiyonları

The remote control allows you to manage your JOOFO floor lamp from a distance of up to 32 feet (10 meters). It offers the following functionalities:

• Güç Açma/Kapatma: Use the power button to turn the lamp açık veya kapalı.
• Renk Sıcaklığı Ayarı (CCT): Cycle through 3 different color temperatures (e.g., warm white, natural white, cool white) to suit your preference.
• Parlaklık Azaltma: Adjust the brightness level of the lamp.
• Hafıza Fonksiyonu: Lamp retains the last used brightness and color temperature settings when turned off and on again.

Figure 2: Remote control range and functionality.

Manyetik Özellik

The remote control features a magnetic back, allowing it to be conveniently attached to the floor lamp itself, a refrigerator, or any other magnetic surface. This helps prevent misplacement.

Figure 3: Magnetic remote control for easy storage.

Bakım

Pil Değişimi

When the remote control's response becomes sluggish or stops working, it may be time to replace the batteries. Use two 23A 12V batteries for replacement. Ensure correct polarity when inserting new batteries.

Temizlik

To clean the remote control, gently wipe it with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the surface or internal components.

Sorun giderme

• Uzaktan kumanda yanıt vermiyor:
  • Pillerin doğru şekilde takılıp takılmadığını ve yeterli şarja sahip olup olmadığını kontrol edin. Gerekirse değiştirin.
  • Uzaktan kumanda ile l arasında herhangi bir engel olmadığından emin olun.amp.
  • Verify that the remote is within the effective operating range (up to 32 feet).
  • Re-attempt the pairing process as described in the 'Setup' section.
• Lamp not changing color temperature or brightness:
  • Confirm the remote is paired correctly.
  • l'yi sağlayınamp model is compatible with this remote control. This remote is designed for JOOFO 30W/2400LM 3 Color Temperatures Floor Lamps.

Özellikler

• Marka: JOOFO
• Model Adı: UZAK
• Uyumlu Cihazlar: JOOFO 30W/2400LM 3 Color Temperatures Floor Lamps
• Bağlantı Teknolojisi: Kızılötesi
• Maksimum Menzil: 32 Ayak (10 metre)
• Pil Tipi: 2 x A23 12V
• Özellik: Hafıza Fonksiyonu
• Öğe Boyutları (U x G x Y): 3.54" x 1.57" x 0.6"

Garanti ve Destek

For any questions regarding compatibility, lamp models, battery types, connection issues, or other concerns, please contact JOOFO customer service. We are committed to providing prompt assistance.

Please refer to your product's purchase documentation for specific warranty details.