TopTes TS-501B Sound Level Meter and TS-710 Light Meter Instruction Manual

1. Giriş

This manual provides essential information for the safe and effective operation of your TopTes TS-501B Sound Level Meter and TS-710 Light Meter. These devices are designed for accurate environmental monitoring, allowing users to measure noise levels and light intensity in various settings. Please read this manual thoroughly before use and retain it for future reference.

2. Ürün Bittiview

The TopTes TS-501B Sound Level Meter and TS-710 Light Meter are a combined solution for environmental assessment. The TS-501B measures sound levels, while the TS-710 measures light intensity, ambient temperature, and humidity. Both devices feature a 2.25-inch backlit LCD screen for clear readings and user-friendly functions.

2.1 TS-501B Sound Level Meter

The TS-501B is equipped with a 1/2 inch electric condenser microphone for precise sound measurement. It offers A/C weighting options to analyze sound based on human ear perception (A-weighting) or for general noise analysis (C-weighting). The measurement range is 30 to 130 dB.

Şekil 1: TS-501B Sound Level Meter showing A-Weighting measurement. This mode measures sound levels as perceived by the human ear, typically ranging from 30 to 130 dBA.

Şekil 2: TS-501B Sound Level Meter showing C-Weighting measurement. This mode is suitable for general noise analysis, with a range of 30 to 130 dBC.

Şekil 3: Kapatmak view of the TS-501B's 1/2 inch Electric Condenser Microphone, protected by a windshield ball for high precision measurements.

2.2 TS-710 Light Meter

The TS-710 features a 180° rotating sensor for flexible light measurement from various directions. It measures light intensity from 0.1 to 200,000 lux (or 0.1 to 20,000 FC) and also provides readings for ambient temperature and humidity.

Şekil 4: TS-710 Light Meter demonstrating its 180° rotating sensor, allowing detection of light from all directions.

Şekil 5: TS-710 Light Meter with its easy-to-read 2.25-inch backlit LCD screen, showing current light, temperature, and humidity readings.

Şekil 6: TS-710 Light Meter illustrating its capability for dual measurement units: LUX (0.1~200,000 LUX) and Foot-Candle (0.1~20,000 FC).

3. Güvenlik Bilgileri

Observe the following safety precautions to prevent injury and avoid damage to the devices:

• Do not attempt to open or modify the devices.
• Keep the devices away from water, high humidity, and extreme temperatures.
• Cihazları düşürmekten veya sert darbelere maruz bırakmaktan kaçınınız.
• Remove batteries if the devices will not be used for an extended period.
• Pilleri yerel düzenlemelere göre atın.

4. Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

• 1 x TopTes TS-710 Light Meter
• 1 x TopTes TS-501B Sound Level Meter
• 2 x Carrying Cases (one for each device)
• AAA piller (önceden takılı veya ayrı olarak dahil)
• Kullanım Kılavuzu (bu belge)

5. Kurulum

5.1 Pil Kurulumu

1. Locate the battery compartment on the back of each device.
2. Pil kapağını açın.
3. AAA pilleri kutupların doğru olmasına dikkat ederek (+/-) yerleştirin.
4. Pil kapağını sıkıca kapatın.

5.2 Açma/Kapatma

Basın Güç button (usually marked with a power symbol) on each device to turn it on. Press and hold the same button to turn it off. Both devices feature an automatic power-off function to conserve battery life after a period of inactivity.

6. Kullanım Talimatları

6.1 General Functions (Both Devices)

• Maksimum/Minimum Kayıt: Basın MAKSİMUM/MİNİMUM button to display the maximum or minimum recorded value during a measurement session. Press again to cycle through MAX, MIN, and current readings.
• Veri tutma: Basın TUTMAK button (or similar icon) to freeze the current reading on the display. Press again to release.
• Arka aydınlatma: Basın Arka ışık button (often marked with a light bulb symbol) to activate or deactivate the screen backlight for improved visibility in low-light conditions.

Şekil 7: Explanation of MAX and MIN functions. MAX displays the highest value measured, while MIN displays the lowest value measured over a given period.

6.2 TS-501B Sound Level Meter Operation

1. Cihazı açın.
2. Select Weighting (A/C): Basın Klima button to switch between A-weighting (for human ear perception) and C-weighting (for general noise analysis).
3. Select Response Time (FAST/SLOW): Basın F/S button to choose between Fast (125ms) or Slow (1s) response times, depending on the nature of the sound being measured.
4. Point the microphone towards the sound source. The current sound level in decibels (dB) will be displayed.

6.3 TS-710 Light Meter Operation

1. Cihazı açın.
2. Rotate Sensor: Adjust the 180° rotating sensor to face the light source directly or to capture ambient light as needed.
3. Select Unit (LUX/FC): Basın BİRİM button to switch between Lux and Foot-Candle measurement units.
4. The device will display the light intensity, ambient temperature, and humidity.

7. Bakım

• Temizlik: Use a soft, dry cloth to clean the device surfaces. Do not use abrasive cleaners or solvents. For the TS-710's light sensor, ensure it remains clean and free of dust for accurate readings.
• Depolamak: Store the devices in their protective carrying cases in a cool, dry place when not in use. Avoid areas with high humidity or extreme temperatures.
• Pil Değişimi: Replace batteries promptly when the low battery indicator appears on the display to ensure continuous accurate operation.

8. Sorun Giderme

9. Özellikler

9.1 TS-501B Sound Level Meter

• Ölçüm Aralığı: 30 ila 130 dB
• Ağırlıklandırma: Klima
• Mikrofon: 1/2 inch Electric Condenser Microphone
• Görüntülemek: 2.25 inç Arkadan Aydınlatmalı LCD
• Fonksiyonlar: MAX/MIN recording, Data Hold, Auto Power-Off

9.2 TS-710 Light Meter

• Light Measurement Range: 0.1 to 200,000 Lux / 0.1 to 20,000 FC
• Sensör: 180° Rotating Sensor
• Ek Ölçümler: Ortam Sıcaklığı, Nem
• Görüntülemek: 2.25 inç Arkadan Aydınlatmalı LCD
• Fonksiyonlar: MAX/MIN recording, Data Hold, Auto Power-Off

10. Garanti ve Destek

TopTes products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided on the TopTes official website or your purchase documentation. Please have your model numbers (TS-501B, TS-710) and purchase date available when contacting support.