1. Giriş
Thank you for choosing the Lexon Horizon Automatic Gel & Liquid Soap Dispenser, Model LH91D. This device is designed to provide a hygienic and convenient way to dispense liquid soap or disinfectant gel. Featuring a contactless infrared sensor, a rechargeable battery, and adjustable output, it is an ideal addition to any modern home or office environment. Please read this manual thoroughly before use to ensure proper operation and maintenance.
2. Güvenlik Bilgileri
- Cihazı suya veya başka bir sıvıya batırmayın.
- Çocukların erişemeyeceği yerde saklayınız.
- Use only liquid soap or disinfectant gel. Do not use granular, abrasive, or thick solutions as they may clog the dispenser.
- Avoid direct sunlight or strong light sources on the sensor, as this may affect its performance.
- Cihazı kendiniz sökmeye veya onarmaya çalışmayın. Yardım için yetkili servis personeline başvurun.
- Şarj kablosunu bağlamadan önce şarj portunun kuru olduğundan emin olun.
3. Paket İçeriği
Lütfen paketi aşağıdaki öğeler açısından kontrol edin:
- Lexon Horizon Automatic Dispenser (LH91D)
- USB Şarj Kablosu
- Kullanıcı Kılavuzu
4. Ürün Bittiview
The Lexon Horizon dispenser features a sleek design and intuitive operation. Familiarize yourself with its main components:
- Dispensing Nozzle: Where soap/gel is released. Features a non-drip valve.
- Kızılötesi sensör: Detects hand movement for automatic dispensing.
- Refillable Reservoir: Holds up to 400 ml of liquid soap or gel.
- Dokunmatik Kontrol Düğmesi: Used to adjust the dispensing volume (1 ml, 1.5 ml, 2 ml).
- LED Göstergesi: Displays charging status and pump activity.
- Şarj Portu: Dahili bataryayı şarj etmek için.
Resim 1: Ön view of the Lexon Horizon Automatic Gel and Liquid Soap Dispenser. The image shows the sleek, cylindrical design with the dispensing nozzle at the bottom and the sensor area above it. The main body is a metallic gold color.
5. Kurulum
5.1. Pilin Şarj Edilmesi
- Cihazınızın şarj portunu bulun.
- Connect the provided USB charging cable to the dispenser and to a suitable USB power adapter (not included).
- The LED indicator will illuminate to show charging status. A full charge typically takes a few hours.
- Tamamen şarj olduktan sonra kabloyu çıkarın.
5.2. Rezervuarın Doldurulması
- Gently twist and remove the top section of the dispenser to access the reservoir.
- Pour liquid soap or disinfectant gel into the reservoir. Do not overfill; leave a small gap at the top.
- Ensure only suitable liquids are used (liquid soap or gel). Avoid foaming soaps or thick lotions.
- Securely reattach the top section by twisting it back into place.
5.3. Yerleşim
Place the dispenser on a flat, stable surface. Ensure there is enough clear space below the nozzle for hands and that the sensor is not obstructed. Avoid placing it in direct sunlight or near strong reflective surfaces.
6. Kullanım Talimatları
6.1. Dispensing Soap/Gel
- Ensure the dispenser is charged and filled.
- Place your hand approximately 2-5 cm (1-2 inches) below the dispensing nozzle.
- The infrared sensor will detect your hand, and the dispenser will automatically release a pre-set amount of soap or gel.
- Remove your hand once the desired amount is dispensed.
6.2. Adjusting Dispensing Volume
The dispenser offers three volume settings: 1 ml, 1.5 ml, and 2 ml.
- Locate the touch control button, usually near the top or front of the device.
- Tap the touch control button to cycle through the volume settings. The LED indicator may briefly change color or flash to indicate the selected volume.
- Test the dispensing volume by placing your hand under the sensor.
7. Bakım
7.1. Temizlik
- Dispenserin dış yüzeyini yumuşak bir bezle silin.amp Aşındırıcı temizleyiciler kullanmayın veya üniteyi suya batırmayın.
- If the nozzle becomes clogged, gently clean it with a small brush or toothpick.
- Ensure the sensor area is kept clean and free from obstructions.
7.2. Yeniden Doldurma
When the liquid level is low, refill the reservoir as described in Section 5.2. Regular refilling prevents air from entering the pump mechanism, ensuring consistent performance.
8. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Dispenser does not activate. | Pil zayıf. Sensör tıkanmış veya kirli. Incorrect hand placement. | Charge the dispenser. Sensör alanını temizleyin. Place hand 2-5 cm below the nozzle. |
| No soap/gel dispensed. | Rezervuar boş. Liquid is too thick or unsuitable. Nozul tıkalı. | Refill the reservoir. Use appropriate liquid soap/gel. Nozulu temizleyin. |
| Dispensing volume is inconsistent. | Pil zayıf. Pompada hava. | Charge the dispenser. Refill the reservoir and activate a few times to prime the pump. |
9. Özellikler
| Özellik | Detay |
|---|---|
| Örnek | LH91D |
| Kapasite | 400 ml / 13.5 oz |
| Dağıtım Hacmi | 1 ml, 1.5 ml, 2 ml (adjustable) |
| Sensör Tipi | Contactless Infrared |
| Pil | Şarj edilebilir (dahili) |
| Malzeme | Alüminyum / ABS |
| Boyutlar (Y x D) | 19.1 cm x 6.8 cm (yaklaşık 7.5 x 2.7 inç) |
| Ağırlık | 195 g (yaklaşık 0.43 lbs) |
10. Garanti ve Destek
Specific warranty information for the Lexon Horizon Automatic Gel & Liquid Soap Dispenser (LH91D) is not provided in this manual. For detailed warranty terms, technical support, or service inquiries, please contact the manufacturer or your point of purchase directly. Keep your proof of purchase for any warranty claims.
For further assistance, please visit the official Lexon websitesine bakın veya müşteri hizmetleri departmanıyla iletişime geçin.