iFlight 5.8Ghz 40CH 2.5W/ 4.9Ghz 8CH 2.5W 2-8S VTX BWhoop

1. Ürün Bittiview

Tanım

The iFlight BLITZ Whoop VTX is a high-power video transmitter designed for FPV drones and quadcopters. It features a built-in microphone, multiple power levels up to 2500mW, and supports 2-8S VBAT input. The VTX includes an integrated cooling fan and CNC cooling casing for efficient heat dissipation. It utilizes an MMCX interface and has a 25.5x25.5mm mounting pattern. Control is managed via LED indicators and function buttons for power level, band, and channel selection, with IRC Tramp telemetry support.

Temel Özellikler

• Built-in microphone for audio transmission.
• giriş hacmitage range: 7V to 34V (2-8S VBAT).
• Four selectable power levels: PIT/25mW/400mW/1000mW/2500mW.
• 8 channels for 4.9Ghz and 40 channels for 5.8Ghz operation.
• CNC cooling casing with integrated cooling fan for dual heat dissipation.
• MMCX antenna interface.
• Compact dimensions: 50*30*16 mm, Lightweight: 32g.
• VTX telemetry: IRC Tramp.

Kutuda Neler Var?

• 1 x BLITZ Whoop 4.9G 2.5W VTX
• Gerekli kablo demetleri
• Montaj vidaları

Figure 1.1: The iFlight BLITZ Whoop VTX module with its antenna cable, mounting screws, and wiring harnesses.

2. Önemli Güvenlik Bilgileri

UYARI: The VTX is set to 25mW by default. Power levels above 25mW require a HAM license or must be approved by local authorities. Always ensure you are flying legal frequencies and use the appropriate Betaflight VTX tables according to your region's regulations.

• Always read the instructions for proper wiring before connecting the VTX. Incorrect wiring can cause damage.
• Ensure the antenna is properly installed before powering on the VTX. Operating without an antenna can significantly shorten the module's lifespan.
• Doğru ses seviyesini doğrulayıntage range (7-34V DC) and polarity (positive/negative) before applying power to prevent component damage.
• When installing the VTX, ensure sufficient space around the module for air convection to facilitate proper heat dissipation.
• Failure to provide adequate cooling may cause the module to activate overheat protection, leading to reduced power transmission or complete shutdown.

3. Kurulum Kılavuzu

Wiring and Port Connections

The BLITZ Whoop VTX features clearly labeled ports for easy integration into your FPV system. Refer to the diagram below for correct connections.

Şekil 3.1: Alt view of the VTX showing port connections.

Montaj

The VTX has a mounting pattern of 25.5x25.5mm with Φ1.6mm holes. Ensure secure mounting using the provided screws. It is crucial to leave adequate space around the VTX for air circulation to allow the integrated cooling fan and CNC casing to dissipate heat effectively. This prevents the VTX from entering overheat protection mode.

4. Kullanım Talimatları

Güç Düğmesi İşlevselliği

The VTX features a 'Power' button to control its output power and PIT mode. Refer to the image below for button location.

Şekil 4.1: Yan view of the VTX showing the 'Band/CH' and 'Power' buttons.

• 2 saniye basılı tutun: Enters or exits PIT mode. A solid green LED light indicates that PIT mode is active.
• Kısa basış: Changes the output power level. The number of green LED flashes indicates the current power setting:
  
  • 1 flash = 25mW
  • 2 flashes = 400mW
  • 3 flashes = 1000mW
  • 4 flashes = 2500mW

Band and Channel Button Functionality

The 'Band/CH' button allows you to cycle through the available bands and channels. Refer to Figure 4.1 for button location.

• Kısa basış: Switches the channel. The number of blue LED flashes indicates the current channel (1 to 8 for 4.9Ghz, or 1 to 40 for 5.8Ghz depending on the selected band).

VTX Telemetry (IRC Tramp)

The BLITZ Whoop VTX supports IRC Tramp telemetry, allowing you to configure VTX settings directly from your flight controller's OSD (On-Screen Display) or Betaflight configurator. Connect the IRC pin on the VTX to a UART TX pad on your flight controller and configure the UART for VTX (Tramp) protocol in Betaflight.

5. Teknik Özellikler

6. Bakım

To ensure the longevity and optimal performance of your iFlight BLITZ Whoop VTX, follow these maintenance guidelines:

• Temiz tut: Regularly inspect the VTX for dust, dirt, or debris, especially around the cooling fan and heatsink fins. Use a soft brush or compressed air to gently clean these areas.
• Uygun Soğutmayı Sağlayın: Always ensure that the VTX has adequate airflow during operation. Avoid enclosing it in tight spaces without ventilation, as this can lead to overheating and performance degradation.
• Anten Bağlantısı: Periodically check the MMCX antenna connection to ensure it is secure. A loose connection can lead to poor video quality and potential damage to the VTX.
• Kablolamayı Kontrol Edin: Before each flight, visually inspect all wiring connected to the VTX for any signs of wear, fraying, or damage. Replace any damaged wires immediately.

7. Sorun Giderme

This section addresses common issues you might encounter with your iFlight BLITZ Whoop VTX.

8. Garanti ve Destek

For warranty information, please refer to the official iFlight website or contact your point of purchase. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.

For technical support, troubleshooting assistance beyond this manual, or to inquire about spare parts, please visit the official iFlight support channels or their Amazon store page:

Visit the iFlight Store on Amazon

Please have your product model number (BLITZ Whoop VTX) and purchase details ready when contacting support.

9. Resmi Ürün Videoları

No official product videos from the seller were provided for this manual. Please check the product listing or the manufacturer's official webMevcut tüm video kaynakları için site.