HOMMPA Nightstand with Wireless Charging Station and LED Lights

1. Önemli Güvenlik Bilgileri

Always follow the assembly instructions carefully. Use caution when handling heavy components. It is recommended to have two people for assembly to prevent injury.

• Montajdan önce tüm parçaların mevcut ve hasarsız olduğundan emin olun.
• Vidaları aşırı sıkmayın, çünkü bu malzemeye zarar verebilir.
• Montaj sırasında küçük parçaları çocuklardan uzak tutun.
• Gece sehpasını düz ve sağlam bir zemine yerleştirin.
• Maksimum yük kapasitesi olan 100 lbs'yi aşmayın.
• Avoid exposing the nightstand to direct sunlight or extreme temperatures.
• Disconnect power before cleaning or moving the unit.

2. Paket İçeriği

Aşağıda listelenen tüm bileşenlerin paketinizde mevcut olduğundan emin olun. Herhangi bir parça eksik veya hasarlıysa, lütfen müşteri hizmetleriyle iletişime geçin.

• Nightstand Panels (various sizes)
• 3 Drawer Sets (fronts, sides, backs, bottoms)
• Drawer Slides (pre-installed or separate)
• Wireless Charging Station with USB/Type-C/AC Outlets
• LED Light Strip (pre-installed or separate)
• LED Uzaktan Kumanda
• Montaj Donanımı (vidalar, dübeller, kilitler vb.)
• Montaj Aletleri (Allen anahtarı, tornavida)
• Kullanım Kılavuzu

3. Montaj Talimatları

Doğru montaj için bu adımları dikkatlice izleyin. Montaj için iki kişi olmanız önerilir.

1. Parçaları Paketinden Çıkarın ve Tanımlayın: Lay out all components on a clean, soft surface to prevent scratches. Refer to the parts list in your manual to identify each piece.
2. Ana Çerçeveyi Birleştirin: Connect the side panels to the base and top panels using the provided hardware (dowels, cam locks, screws). Ensure all connections are secure.

   Image: Initial assembly of the nightstand frame, showing panels being connected.
3. Install LED Lights (if separate): If your LED light strip is not pre-installed, carefully attach it to the designated area, usually within the open shelf section, following the adhesive backing. Ensure the cable is routed correctly.

   Image: Installation of the LED light strip in the open shelf area.

4. Çekmeceleri monte edin: For each drawer, connect the side, back, and front panels. Insert the drawer bottom into the grooves. Secure with screws. Attach the drawer slides to the drawer sides.

   Image: Step-by-step guide for assembling a drawer.

5. Install Drawer Slides to Frame: Attach the corresponding drawer slides to the interior of the nightstand frame. Ensure they are level and aligned.
6. Çekmeceleri Takın: Carefully slide the assembled drawers into the installed drawer slides on the nightstand frame. Ensure they open and close smoothly.

   Image: Inserting the completed drawers into the nightstand.
7. Şarj İstasyonunu Kurun: Place the wireless charging station into the pre-cut opening on the top panel. Secure it if necessary and connect its power cable to the main power source.

   Image: Placement of the charging station on the nightstand's top surface.

8. Son Bağlantılar: Connect the LED light strip to its power source, typically integrated with the main power cable of the charging station. Plug the nightstand into a wall outlet.

For a visual guide, refer to the installation video provided by the manufacturer.

4. Kullanım Talimatları

4.1 Kablosuz Şarj İstasyonu

The nightstand is equipped with a 15W wireless charging pad, one USB port, one Type-C port, and two AC outlets.

• Kablosuz Şarj: Place your Qi-compatible device (smartphone, earbuds) directly onto the wireless charging pad located on the top surface. Ensure the device is centered for optimal charging. A charging indicator may appear on your device.
• USB/Type-C Ports: Connect your devices using appropriate USB-A or USB-C cables to the respective ports for wired charging (5V/2A output).
• AC Prizleri: Plug in standard electronic devices into the two 120V/12A AC outlets.

Image: The integrated charging station with wireless charging, USB, Type-C, and AC outlets.

4.2 LED Işık

The built-in RGB LED lights can be controlled via the included remote or a dedicated smartphone application.

• Uzaktan kumanda: Use the 24-key remote to power the lights on/off, change colors (over 16 million options), adjust brightness (10 levels), select lighting modes (static, flash, music sync, mix effects), and set timers.
• Uygulama Kontrolü: Download the recommended app (refer to the manual for QR code or name) to access advanced features, including custom color creation, music synchronization, and scheduling.

Resim: Eskiamples of LED light colors and control options via remote and app.

5. Bakım

• Temizlik: Yüzeyleri yumuşak bir bezle silin.amp Bez kullanın. Parlak yüzeye zarar verebilecek aşındırıcı temizleyicilerden veya sert kimyasallardan kaçının.
• Toz alma: Regularly dust the nightstand to prevent buildup.
• Güç Ünitesi: Keep the charging station free from dust and debris. Do not spill liquids on the charging ports or wireless pad.
• Çekmece Bakımı: Periodically check drawer slides for smooth operation. If drawers become stiff, a small amount of silicone lubricant can be applied to the slides.

6. Sorun Giderme

7. Özellikler

• Marka: HOMMPA
• Model Adı: 06XLXXL
• Model Numarası: Nightstand wl-3
• Boyutlar (D x G x Y): 19.7" x 15.8" x 26.8"
• Ürün Ağırlığı: 46.3 Pound
• Malzeme: Mühendislik ürünü ahşap (sunta, MDF)
• Renk: Siyah
• Bitiş Türü: High Gloss (front panels), Matte (other surfaces)
• Çekmece Sayısı: 3
• Raf Sayısı: 1 (açık raf)
• Kablosuz Şarj: 15W
• USB Bağlantı Noktaları: 1 x USB-A (5V/2A), 1 x Type-C (5V/2A)
• AC Prizleri: 2 x 120V/12A
• LED Işıklar: RGB, adjustable brightness, multiple modes (remote/app control)
• Maksimum Yük Kapasitesi: 100 kilo
• Montaj Gerekli: Evet (2 kişi önerilir)

Image: Product dimensions and key features.

8. Garanti ve Destek

For warranty information, missing parts, or technical support, please contact HOMMPA customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.