giriiş
Satın aldığınız için teşekkür ederizasing the mooas Wooden Frame LED Silent Wall Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new clock. Please read this manual thoroughly before use to ensure proper functionality and to maximize your product experience.
Güvenlik Bilgileri
- Ensure the clock is powered by the provided adapter only.
- Cihazı suya veya aşırı neme maruz bırakmayın.
- Saati doğrudan güneş ışığına veya ısı kaynaklarının yakınına koymaktan kaçının.
- Çocukların erişemeyeceği yerde saklayınız.
- Cihazı kendiniz sökmeye veya onarmaya çalışmayın. Yardım için müşteri desteğine başvurun.
Paket İçeriği
Paketinizde tüm öğelerin mevcut olduğundan emin olun:
- mooas Wooden Frame LED Silent Wall Clock
- Uzaktan kumanda
- USB-C Güç Kablosu
- US (110V) Power Adapter
- Wooden Desk Stand
- Wall Mounting Accessories (Wall mount pin, Art wall hook, Cable clip, Screw anchor, Wall mount screw)
- Kullanıcı Kılavuzu

Şekil 1: Paket İçeriğiview
Kurmak
1. Güç Bağlantısı
Connect the provided USB-C power cable to the clock and plug the US (110V) power adapter into a wall outlet. The clock requires continuous power via the adapter to function. The built-in CR2032 battery is for time memory only and does not power the clock.

Figure 2: Updated US Power Adapter
2. Remote Control Activation
Before first use, remove the protective film from the back of the remote control. If the remote control does not respond, separate both the battery and cable from the clock and remote control, then reconnect them. This will reset the time, which you will need to set again.
3. Montaj Seçenekleri
The clock offers two display options: wall mounting or desk standing.
- Duvara Montaj: Use the hanging hole on the back of the clock and the provided wall mounting accessories (wall mount pin, art wall hook, screw anchor, wall mount screw) to securely hang the clock on a wall.
- Desk Standing: Insert the clock into the included wooden desk stand for stable placement on any flat surface.

Figure 3: Wall Mounting and Desk Standing Options
4. Kablo Yönetimi
The clock features a thin cable (0.043 inch) designed for neat installation, making it less visible when the clock is set up.

Figure 4: Thin Cable for Discreet Installation
Kullanım Talimatları
1. Basic Display
The LED display shows the time, date, and day of the week. The day of the week can be set in 8 languages: English, German, Italian, French, Dutch, Spanish, Danish, and Russian.

Figure 5: Display Elements
2. Çalışma Modları
The clock features three operating modes:
- Saat Modu: Saati, tarihi ve günü gösterir.
- Gece Işığı Modu: Activates the backlight nightlight only.
- Nightlight & Clock Mode: Displays time, date, day with the backlight nightlight active.

Şekil 6: Üç Çalışma Modu
3. Nightlight Features
The backlight nightlight offers three color options to suit your preference:
- Yellow (Warm White): 2700K
- White (Daylight): 4000K
- Blue (Cool White): 5500K
You can also set a nightlight timer for automatic shut-off, with a maximum setting of 120 minutes and a default of 30 minutes.

Figure 7: Nightlight Color Options
4. Parlaklık Ayarı
The LED display and mood light brightness can be adjusted to 5 levels. The clock also features an automatic brightness adjustment function controlled by an illuminance sensor. To activate auto-brightness, long-press the display brightness button on the remote; the display will blink twice to confirm activation.

Figure 8: 5 Levels of Brightness

Figure 9: Auto Brightness Control
5. Alarm Özellikleri
- Sunrise Alarm: Set a 10, 20, or 30-minute sunrise mode where the backlight gradually brightens before the alarm time, providing a gentle wake-up experience.
- Weekday Alarm: Configure alarms to activate only on weekdays, allowing for uninterrupted rest on weekends.
- Melodiler: Choose from 5 available melodies, including bird sounds, rain sounds, and a standard beep.
- Alarm Volume Control: Adjust the alarm volume to High (03), Mid (02), Low (01), or Off. The sequence for adjustment is High (03) → Off → Low (01) → Mid (02).

Figure 10: Melody Alarm Feature

Figure 11: Alarm Volume Control
6. Uzaktan Kontrol Üzerindeview
The remote control provides easy access to all clock functions. Refer to the diagram below for button functions:

Şekil 12: Uzaktan Kumanda Fonksiyonları
7. Temperature Display (Celsius/Fahrenheit)
To switch between Celsius (C) and Fahrenheit (F) temperature display, short press the UP Uzaktan kumandadaki düğmeye basın.
Bakım
To maintain your mooas clock, gently wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the wooden frame or LED display. Ensure the clock is unplugged before cleaning.
Sorun giderme
- Saat açılmıyor: Güç adaptörünün hem saate hem de çalışan bir elektrik prizine güvenli bir şekilde bağlı olduğundan emin olun.
- Uzaktan kumanda yanıt vermiyor: Remove the protective film from the remote. If issues persist, disconnect and reconnect the battery and cable from both the clock and remote to reset.
- Display too bright: Adjust the brightness manually using the remote control or activate the auto-brightness function.
- Yanlış saat/tarih: Reset the time and date using the remote control. The internal CR2032 battery helps retain settings during brief power outagee.
Özellikler
| Özellik | Şartname |
|---|---|
| Marka | mooalar |
| Model Numarası | MC-L8 |
| Ürün Boyutları | 11.4"G x 11.4"Y |
| Malzeme Türü | Odun |
| Görüntü Türü | Dijital LED |
| Güç Kaynağı | Corded Electric (5V 2A adapter) |
| Özel Özellikler | Alarm, Backlit Nightlight, Remote Control, Auto Brightness Adjustment, Sunrise Alarm, Nightlight Timer |
| Montaj Tipi | Duvara Monte, Masa Üstü Standı |
Ürün Bittiview Video
Görsel olarak daha fazlasını öğrenmek için bu resmi videoyu izleyin.view of the mooas Wooden Frame LED Silent Wall Clock's features and design.
Video 1: mooas Wooden Frame LED Clock Overview
Garanti ve Destek
For warranty information or technical support, please refer to the product packaging or contact mooas customer service directly. Keep your purchase receipt for warranty claims.

