Torin AT46002AB-1 Double Locking Steel Jack Stands

Önemli Güvenlik Bilgileri

WARNING: Read, understand, and follow all instructions before using this device. Failure to observe these warnings may result in personal injury and/or property damage.

• Always use jack stands in pairs on a hard, level surface.
• Do not exceed the rated capacity of 6 tons (12,000 LBs) per pair.
• Ensure the vehicle is properly supported and stable before working underneath it.
• Position jack stands under the vehicle's frame or axle, at points recommended by the vehicle manufacturer.
• Engage the double-lock protection feature by inserting the safety pin through the ratchet bar.
• Never work under a vehicle supported only by a jack. Always use jack stands.
• Keep hands and feet clear of the jack stand during adjustment and when lowering the vehicle.
• Koruyucu gözlük ve eldiven gibi uygun kişisel koruyucu ekipman kullanın.

Proposition 65 Uyarısı: Bu ürün, Kaliforniya Eyaleti tarafından kansere ve doğum kusurlarına veya diğer üreme sistemi hasarlarına neden olduğu bilinen kurşun da dahil olmak üzere kimyasallara maruz kalmanıza neden olabilir. Daha fazla bilgi için lütfen şu adresi ziyaret edin: www.P65Uyarılar.ca.gov.

Ürün Bittiview

The Torin AT46002AB-1 Double Locking Steel Jack Stands are designed to provide reliable and secure support for vehicles during maintenance. These jack stands feature a robust steel construction and a double-lock protection system for enhanced safety.

Temel Özellikler

• Double locking jack stands, sold as a pair.
• Height ranges from 15-3/8" to 23-13/16".
• 6 ton (12,000 lb.) capacity per pair.
• Double-lock protection feature for increased safety.
• Large saddle surface area for better contact with the load.
• Large foot base size of 10-13/16" by 9-7/16" for stability.
• Single piece, self-locking, multi-position, forged iron ratchet bar for precise adjustments.

Bileşenler

The jack stand consists of a sturdy base, an adjustable ratchet bar, a saddle for supporting the vehicle, and a double-locking mechanism including a safety pin and a locking handle.

The double locking feature provides an additional layer of security, ensuring the ratchet bar remains firmly in place once adjusted.

The robust construction with reinforcing steel and an anti-corrosion finish ensures durability and longevity.

Kurmak

Before initial use, ensure all components are present and undamaged. Familiarize yourself with the operation of the ratchet bar and safety pin.

1. Paketi aç: Remove the jack stands from their packaging.
2. İncelemek: Check each jack stand for any signs of damage, such as bent components, cracks, or missing parts. Do not use damaged equipment.
3. Tanışın: Understand how the ratchet bar adjusts and how the safety pin secures the height.

The safety pin is attached to the jack stand via a chain to prevent loss and ensures it is readily available for securing the ratchet bar.

Kullanım Talimatları

Kullanmadan Önce

• Çalışma alanının iyi aydınlatılmış ve engellerden arındırılmış olduğundan emin olun.
• Aracı sert ve düz bir yüzeye park edin.
• El frenini çekin ve yerde kalacak tekerlekleri bloke edin.
• Consult your vehicle's owner's manual for recommended lifting points.

Lifting a Vehicle and Placing Jack Stands

1. Jack'in pozisyonu: Place a floor jack under the vehicle's recommended lifting point.
2. Raise Vehicle: Lift the vehicle to the desired height, ensuring it is stable.
3. Position Jack Stands: Place the Torin jack stands under the vehicle's frame or axle at the manufacturer's specified support points. Ensure the saddle of the jack stand makes full contact with the vehicle's support point.
4. Yüksekliği Ayarlayın: Raise the ratchet bar to the appropriate height, ensuring it locks securely into place.
5. Engage Double Lock: Insert the safety pin through the hole in the ratchet bar and the jack stand body to engage the double-lock protection.
6. Aracı İndir: Slowly lower the vehicle onto the jack stands. Ensure the vehicle is resting securely on both jack stands before beginning any work.

Always ensure the vehicle is centered and stable on the jack stands before proceeding with any work.

Araç İndirme

1. Raise Vehicle: Use the floor jack to slightly raise the vehicle off the jack stands.
2. Emniyet pimini çıkarın: Remove the safety pin from each jack stand.
3. Lower Ratchet Bar: Depress the locking handle and carefully lower the ratchet bar to its lowest position.
4. Kriko ayaklarını çıkarın: Remove the jack stands from under the vehicle.
5. Aracı İndir: Slowly lower the vehicle completely to the ground using the floor jack.

Bakım

• Temizlik: Keep the jack stands clean and free of dirt, grease, and corrosive materials.
• Yağlama: Periodically lubricate the pivot points and the ratchet bar mechanism with light machine oil to ensure smooth operation.
• Denetleme: Before each use, inspect the jack stands for any signs of wear, damage, or corrosion. Pay close attention to welds, the ratchet bar, and the safety pin. Replace any damaged parts immediately or discontinue use if repairs are not possible.
• Depolamak: Store jack stands in a dry, clean area when not in use.

Sorun giderme

• Sorun: Ratchet bar does not lock securely.
  Çözüm: Check for debris in the locking mechanism. Ensure the locking handle is fully engaged. Lubricate the mechanism if stiff.
• Sorun: Jack stand appears unstable.
  Çözüm: Ensure the jack stand is on a hard, level surface. Verify the vehicle's weight does not exceed the stand's capacity. Reposition the stand to ensure full contact with the vehicle's support point.
• Sorun: Safety pin is difficult to insert or remove.
  Çözüm: Ensure the ratchet bar is properly aligned. Clean any rust or debris from the pin and hole. Apply a small amount of lubricant if necessary.

Özellikler

Garanti Bilgileri

This product includes a limited 1-year manufacturer warranty. For specific details regarding coverage and claims, please refer to the warranty documentation provided with your purchase or contact Torin customer support.

Resmi Ürün Videoları