BONTEC Single Monitor Arm Desk Mount User Manual

1. Giriş

Thank you for choosing the BONTEC Single Monitor Arm Desk Mount. This product is designed to enhance your workspace ergonomics and efficiency by providing a flexible and stable mounting solution for your monitor. This manual provides detailed instructions for safe installation, operation, and maintenance of your monitor arm. Please read it thoroughly before beginning installation and keep it for future reference.

Şekil 1: Üzeriview of the BONTEC Single Monitor Arm Desk Mount, showcasing its adjustable arm and dual mounting options (C-clamp and grommet base).

2. Güvenlik Bilgileri

Please observe the following safety precautions to prevent injury or damage to your equipment:

• Ağırlık Kapasitesi: Do not exceed the maximum weight capacity of 19.8 lbs (9 kg). Overloading can cause instability and potential damage.
• Ekran Boyutu: This mount is designed for screens between 13 and 34 inches.
• VESA Uyumluluğu: Ensure your monitor has VESA 75x75mm or 100x100mm mounting holes.
• Masa Kalınlığı: Verify your desk thickness is within the specified range for C-clamp (0.39" to 3.35" / 10mm to 85mm) or Grommet base (0.39" to 3.35" / 10mm to 85mm, hole diameter 0.39" to 2.36" / 10mm to 60mm).
• Toplantı: Assemble the product exactly as instructed. Improper assembly can lead to product failure.
• Hareketli parçalar: Be aware of pinch points when adjusting the arm. Keep hands clear of moving parts.
• Gazlı Yay: The gas spring is under high pressure. Do not attempt to disassemble it. Adjust tension carefully as per instructions.

3. Paket İçeriği

Please check that all components are present and undamaged before installation. If any parts are missing or damaged, contact BONTEC customer support.

• Monitör Kolu Tertibatı
• Masa Clamp Temel
• Grommet Base Components
• VESA Plakası
• Donanım Seti (vidalar, rondelalar, Allen anahtarları)
• Kullanım Kılavuzu

4. Özellikler

Figure 2: The monitor arm is compatible with screens from 13 to 34 inches and supports up to 19.8 lbs, featuring VESA 75x75mm and 100x100mm patterns.

5. Kurulum ve Kurulum

The BONTEC monitor arm offers two installation methods: C-clamp and Grommet base. Choose the method best suited for your desk.

5.1 Montaj Seçeneğinizi Seçin

Figure 3: Illustration of the two available installation methods: Desk Clamp (C-clamp) and Grommet Base, along with their respective desk thickness and hole diameter requirements.

5.1.1 C-CIamp Kurulum

1. C-cl'yi takınamp to the main pole of the monitor arm.
2. C-cl'yi konumlandırınamp on the edge of your desk, ensuring it is stable and secure.
3. Cl'yi sıkınamp screw until the mount is firmly attached to the desk. The C-clamp includes silicone sleeves and an EVA pad to protect your desk surface.

5.1.2 Kablo Demeti Tabanı Montajı

1. If your desk has a grommet hole, insert the grommet base components through the hole.
2. Sağlanan donanımı kullanarak kablo geçiş deliğinin tabanını masanın altından sabitleyin.
3. Attach the main pole of the monitor arm to the secured grommet base.

5.2 Monitörün Takılması

The VESA plate is detachable for easy monitor attachment.

Figure 4: Step-by-step guide for attaching the VESA plate to your monitor and then securely mounting it onto the monitor arm. Hand screws are used for convenience.

1. Remove the VESA plate from the monitor arm by lifting it up.
2. VESA plakasını monitörünüzün arkasındaki montaj delikleriyle (75x75 mm veya 100x100 mm) hizalayın.
3. Secure the VESA plate to the monitor using the appropriate screws from the hardware kit. Hand screws are provided for easy installation without a screwdriver.
4. Carefully slide the monitor with the attached VESA plate onto the monitor arm until it clicks securely into place.

6. Kullanım Talimatları

The BONTEC monitor arm features a gas spring system for smooth and effortless adjustments.

6.1 Monitör Konumunun Ayarlanması

Figure 5: The monitor arm offers extensive flexibility with ±90° tilt, ±90° swivel, and full 360° rotation for optimal viewaçıları.

• Tilt: Gently push or pull the top or bottom of your monitor to achieve the desired vertical angle (±90°).
• Döner: Monitörü yatay olarak döndürerek ayarlama yapın. viewing angle left or right (±90°).
• Rotasyon: Monitörü 360° döndürerek yatay ve dikey görüntüleme arasında geçiş yapabilirsiniz.
• Yükseklik Ayarı: The gas spring arm allows you to effortlessly raise or lower your monitor to your preferred ergonomic height, up to a maximum of 25 inches from the tabletop.
• Eklenti: Extend or retract the arm to adjust the distance of your monitor from your eyes, up to a maximum extension of 22.44 inches.

Figure 6: The monitor arm facilitates easy transition between sitting and standing positions, promoting ergonomic posture and reducing strain during long work sessions.

6.2 Adjusting Gas Spring Tension

The gas spring tension may need adjustment to properly support your monitor's weight. The arm features a robust 750 N·m gas spring.

Figure 7: The monitor arm is equipped with a powerful 750 N·m gas spring, ensuring stable and smooth adjustments for monitors up to 19.8 lbs.

1. If the monitor sags or does not stay in position, increase the tension. Use the provided Allen key to turn the adjustment screw (usually located on the arm near the VESA plate or main pole) clockwise.
2. If the monitor floats up or is difficult to push down, decrease the tension. Turn the adjustment screw counter-clockwise.
3. Adjust gradually and test the arm's movement until the monitor stays in place at any desired height.

6.3 Kablo Yönetimi

The monitor arm includes integrated cable management clips to keep your workspace tidy.

Figure 8: Utilize the built-in cable management system to route and conceal monitor cables, reducing clutter and maintaining a clean, organized desk.

Route your display and power cables through the clips or channels along the arm to maintain a clean and organized workspace.

7. Bakım

Düzenli bakım, monitör kolunuzun uzun ömürlü olmasını ve optimum performans göstermesini sağlar.

• Temizlik: Kolunuzu yumuşak bir bezle silin.amp Bez. Cilaya zarar verebilecek aşındırıcı temizleyicilerden veya çözücülerden kaçının.
• Denetleme: Tüm vidaların ve bağlantıların sıkı ve güvenli olduğundan emin olmak için periyodik olarak kontrol edin. Gerekirse yeniden sıkın.
• Gazlı Yay: The gas spring is maintenance-free. Do not attempt to lubricate or disassemble it.

8. Sorun Giderme

Monitör kolunuzla ilgili sorunlarla karşılaşırsanız, aşağıdaki yaygın sorunlar ve çözümlere göz atın:

• Monitor Sags or Does Not Stay Up:
  • The monitor may be too heavy for the current gas spring tension. Increase the gas spring tension by turning the adjustment screw clockwise.
  • Ensure the monitor's weight is within the specified range (6.6 - 19.8 lbs).
• Monitor Floats Up or is Difficult to Push Down:
  • The gas spring tension is too high for the monitor's weight. Decrease the gas spring tension by turning the adjustment screw counter-clockwise.
• Arm is Loose or Wobbly:
  • Tüm montaj vidalarını kontrol edin (C-clamp/grommet base and VESA plate) and tighten them securely.
  • Ensure the desk surface is stable and thick enough for the chosen mounting method.
• Monitor Does Not Tilt/Swivel Smoothly:
  • Herhangi bir engel olup olmadığını kontrol edin.
  • Ensure all pivot points are free of debris. Do not lubricate.

9. Garanti ve Destek

BONTEC products are manufactured with high-quality materials and craftsmanship. For any questions, concerns, or warranty claims, please contact BONTEC customer support through the retailer where you purchased the product or visit the official BONTEC webiletişim bilgileri için site.

Please have your model number (GDM7503) and purchase details ready when contacting support.