AZZA PSAZ-1000P 80+ Platinum 1000W ATX 3.0 Power Supply User Manual

1. Giriş

This manual provides essential information for the installation, operation, and maintenance of your AZZA PSAZ-1000P 80+ Platinum 1000W ATX 3.0 Power Supply. Please read this manual thoroughly before installation to ensure proper and safe usage of the product.

The AZZA PSAZ-1000P is a high-performance, fully modular power supply designed to meet the demands of modern computing systems, featuring 80 PLUS Platinum efficiency and ATX 3.0 compliance.

2. Güvenlik Bilgileri

• Yapamaz Güç kaynağı ünitesini açın. Yüksek voltajtagCihazın fişi çekilmiş olsa bile, içeride parazitler mevcuttur.
• Güç kaynağını iyi havalandırılan bir alana, ısı kaynaklarından ve doğrudan güneş ışığından uzak bir yere kurun.
• Güç kaynağının topraklı bir elektrik prizine bağlı olduğundan emin olun.
• Use only the modular cables provided with your AZZA PSAZ-1000P power supply. Using incompatible cables may damage the PSU or connected components.
• Before installation or maintenance, always disconnect the power cord from the wall outlet.
• Güç kaynağının neme veya aşırı sıcaklıklara maruz kalmasından kaçının.

3. Paket İçeriği

Paketinizde tüm öğelerin mevcut olduğundan emin olun:

• AZZA PSAZ-1000P Power Supply Unit
• Modular Cable Set (including 16-pin PCIe Gen 5.0 cable)
• AC Güç Kablosu
• Montaj Vidaları
• Kullanım Kılavuzu (bu belge)

4. Ürün Özellikleri

The AZZA PSAZ-1000P power supply offers advanced features for reliable and efficient performance:

• Complies with ATX12V V3.0 standard
• Efficiency ≥ 92% at typical load (80 PLUS Platinum certified)
• Eco semi-fanless fan control switch for quiet operation at low loads
• 120mm smart hydraulic bearing (HYB) fan for optimal cooling and durability
• LLC Full Bridge Topology with DC-DC module design for stable power delivery
• Support for PCIe Gen 5.0 graphics cards with a high-quality native 16-pin cable supporting 600W output
• Complete protection features: Over Current Protection (OCP), Over Voltage Protection (OVP), Over Power Protection (OPP), Short Circuit Protection (SCP), Over Temperature Protection (OTP), Under Voltage Koruma (UVP)
• Fully modular design for improved cable management and airflow

5. Kurulum ve Kurulum

Güç kaynağınızı takmak için şu adımları izleyin:

1. Bilgisayar Kasanızı Hazırlayın: Ensure your PC case is compatible with ATX power supplies. Remove the side panel of your computer case.
2. Güç kaynağını monte edin: Carefully slide the AZZA PSAZ-1000P into the designated power supply bay in your PC case. Secure it with the provided mounting screws from the rear of the case.
3. Modüler Kabloları Bağlayın: Identify the necessary cables for your motherboard, CPU, graphics card(s), and storage devices. Connect them to the corresponding ports on the power supply unit. Refer to the image below for port identification.

This image displays the AZZA PSAZ-1000P power supply unit from an isometric view. The modular cable connection panel is visible on the right side, labeled with 'M/B 18+10P' (Motherboard), 'CPU & PCI-E', 'SATA & MOLEX' (for storage and peripherals), and '+12VHPWR' (for high-power PCIe Gen 5.0 graphics cards) ports. The top features a fan grille, and the side shows '1000W' and 'AZZA' branding.

4. Anakart Bağlantısı: Connect the 24-pin ATX cable (M/B 18+10P) to your motherboard.
5. CPU Gücü: Connect the 4+4 pin or 8-pin EPS12V cable(s) from the 'CPU & PCI-E' ports to your motherboard's CPU power connector(s).
6. Ekran Kartı Gücü: Connect the appropriate PCIe cables (6+2 pin or the 16-pin 12VHPWR cable for Gen 5.0 GPUs) from the 'CPU & PCI-E' or '+12VHPWR' ports to your graphics card(s). Ensure the 16-pin connector is fully seated if used.
7. Depolama ve Çevre Birimleri: Connect SATA and Molex cables from the 'SATA & MOLEX' ports to your hard drives, SSDs, optical drives, and other peripherals.
8. Kablo yönetimi: Kasa içindeki hava akışını ve estetiği iyileştirmek için kabloları düzgün bir şekilde yönlendirin.
9. AC Gücünü Bağlayın: Tüm dahili bağlantılar güvenli bir şekilde yapıldıktan sonra, AC güç kablosunu güç kaynağına ve ardından duvardaki prize bağlayın.

6. Kullanım Talimatları

After installation, ensure the power switch on the rear of the power supply is in the 'ON' position. You can then power on your computer using the case's power button.

Eco Semi-Fanless Mode

The AZZA PSAZ-1000P features an Eco semi-fanless mode, controlled by a switch on the power supply. When enabled, the fan will remain off during low to moderate loads for silent operation. The fan will automatically activate when the load increases or the internal temperature reaches a certain threshold to maintain optimal cooling. Disabling this mode will cause the fan to operate continuously, adjusting its speed based on load and temperature.

7. Bakım

Doğru bakım, güç kaynağınızın uzun ömürlü olmasını ve optimum performans göstermesini sağlar:

• Toz Giderimi: Periodically clean the exterior of the power supply and its fan grille to prevent dust buildup. Use compressed air to gently clear dust from the fan blades and vents. Temizliğe başlamadan önce mutlaka güç kaynağını prizden çıkarın.
• Kablo Denetimi: Occasionally check all modular cable connections to ensure they are securely seated.
• Havalandırma: Ensure that the power supply's intake and exhaust vents are not obstructed, allowing for proper airflow.

8. Sorun Giderme

Güç kaynağınızla ilgili sorunlarla karşılaşırsanız, aşağıdaki genel sorun giderme adımlarına bakın:

If the problem persists after trying these steps, please contact AZZA customer support.

9. Özellikler

10. Garanti ve Destek

AZZA products are manufactured to the highest quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the official AZZA websiteye gidin veya doğrudan müşteri destekleriyle iletişime geçin.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please visit the AZZA official webalan veya destek ekibiyle iletişime geçin.