Yaheetech Metal Bed Frame 90 x 190 cm

1. Giriş

Thank you for choosing the Yaheetech Metal Bed Frame. This manual provides essential information for the safe assembly, proper use, and effective maintenance of your new bed frame. Please read these instructions carefully before beginning assembly and retain them for future reference.

Figure 1: Yaheetech Metal Bed Frame (90 x 190 cm, Black)

2. Güvenlik Bilgileri

• Ürüne veya zemine zarar gelmesini önlemek için yatak çerçevesini her zaman yumuşak ve temiz bir zemin üzerine monte edin.
• Montajdan önce tüm parçaların eksiksiz ve hasarsız olduğundan emin olun. Herhangi bir parça eksik veya hasarlıysa montaj işlemine devam etmeyin.
• Tüm vidaları ve cıvataları iyice sıkın, ancak dişlerin sıyrılmasını önlemek için aşırı sıkmayın.
• Regularly check all fasteners to ensure they remain tight. Loose fasteners can compromise stability.
• Do not allow children to climb on the bed frame during assembly or use.
• The maximum weight capacity for this bed frame is 180 kg (397 lbs). Do not exceed this limit.
• Use only the recommended mattress size (90 x 190 cm) to ensure proper fit and safety.

3. Paket İçeriği

Please verify that all components listed below are included in your package. If any parts are missing, please contact customer support.

• Başlık ve ayakucu bölümleri
• Yan Raylar
• Metal Çubuklar (12 adet)
• Destek Ayakları (6 adet)
• Assembly Hardware (screws, bolts, L-shaped plates, Allen key)

Şekil 2: Patlatılmış view and dimensions of the bed frame components.

4. Kurulum ve Montaj Talimatları

Follow these steps carefully to assemble your Yaheetech Metal Bed Frame.

1. Parçaları Paketinden Çıkarın ve Tanımlayın: Lay out all components on a clean, soft surface. Refer to the parts list to ensure everything is present.
2. Yan rayları başlık ve ayakucu kısmına takın: Connect the side rails to the headboard and footboard using the provided bolts and L-shaped plates. Ensure all connections are secure.
3. Destek Ayaklarını Takın: Attach the central support legs to the designated points on the side rails or central beam.
4. Metal çıtaları yerleştirin: Carefully place each metal slat into the designated notches on the side rails. Ensure each slat is fully seated and secured. Some slats may require a firm press to click into place.
   

   Figure 3: Aligning and securing metal slats.

5. Güvenli Bağlantılar: Use the provided Allen key to tighten all bolts and screws. Ensure all L-shaped plates are firmly fastened for maximum stability.
   

   Figure 4: Fastening L-shaped plates for structural stability.
6. Son Kontrol: Once assembled, gently shake the frame to ensure it is stable and all connections are tight.

5. Kullanım Talimatları

5.1 Yatak Yerleşimi

Place your 90 x 190 cm mattress directly onto the assembled metal slats. The design of the bed frame, including the slightly recessed slats, helps to prevent the mattress from sliding.

Figure 5: Built-in slats prevent mattress from sliding.

5.2 Yatak Altı Depolama Alanı

The bed frame offers approximately 32 cm (12.6 inches) of clearance underneath, providing ample space for storage boxes, luggage, or other items. This maximizes storage efficiency in your bedroom.

Figure 6: Under-bed storage space.

6. Bakım

• Temizlik: Metal çerçeveyi yumuşak bir bezle silin.amp Kumaşı aşındırmayın. Cilaya zarar verebilecek aşındırıcı temizleyicilerden veya sert kimyasallardan kaçının.
• Bağlantı Elemanı Kontrolü: Periodically (e.g., every 3-6 months) check all bolts and screws and retighten if necessary to maintain stability and prevent squeaking.
• Zemin Koruması: The bed frame is equipped with bottom rubber caps to protect your floor from scratches. Ensure these caps remain in place.
  

  Figure 7: Features including under-bed storage and headboard design.

7. Sorun Giderme

• Gıcırtı Sesleri: Squeaking often indicates loose connections. Re-tighten all bolts and screws. Ensure all slats are properly seated.
• Yatak Kaydırma: If the mattress slides, ensure it is correctly positioned within the frame's recessed area. Check that all slats are securely in place.
• Kararsızlık: If the bed frame feels unstable, verify that all components are correctly assembled and all fasteners are fully tightened.

8. Özellikler

Şekil 8: Ürün özelliklerinin görsel temsili.

9. Garanti ve Destek

For information regarding warranty coverage or to obtain customer support, please refer to the purchase documentation or contact Yaheetech directly through their official website or the retailer where the product was purchased. Please have your model number (YA-00128897) and purchase date available when contacting support.