1. Giriş
This manual provides essential instructions for the safe and effective use of your ALLWEI Portable Power Station 300W, Model SGR-PPS300-2. This device is a 280Wh solar generator designed to provide portable power for various applications, including outdoor activities, emergency power outages, and home backup. Please read this manual thoroughly before operating the unit and retain it for future reference.
2. Paket İçeriği
Upon unpacking, please verify that all items listed below are included and in good condition. If any items are missing or damaged, contact ALLWEI customer support.
- 1x ALLWEI 300W 280Wh Portable Power Station
- 1x AC Güç Adaptörü
- 1x AC Power US Cord
- 1x Car Cable
- 1x Kullanım Kılavuzu
Figure 2.1: Package Contents of the ALLWEI Portable Power Station.
3. Ürün Özellikleri
The ALLWEI Portable Power Station 300W is equipped with several features designed for versatility and safety:
- Yüksek Kapasite: 280Wh lithium battery for extended power supply.
- Çoklu Çıkış Bağlantı Noktaları: Includes 2x AC outlets, 3x DC 5521 output (12V 3A), 2x USB-A QC3.0 fast charge, 1x PD 60W USB-C, and 1x DC car outlet.
- Çoklu Şarj Seçenekleri: Supports AC wall charging, car charging, and solar panel charging (solar panel not included).
- Kompakt ve Taşınabilir: Weighs 6.5 lbs with dimensions of 8.86 x 4.53 x 8.07 inches for easy transport.
- Integrated Safety System: Built-in Battery Management System (BMS) and MPPT controller provide protection against various electrical faults.
- LED Aydınlatma: Features a 3-level LED light with an SOS mode for emergencies.
4. Kurulum
4.1 İlk Ücretlendirme
Before first use, fully charge the power station. Connect the AC power adapter to the input port and plug it into a wall outlet. The LCD screen will indicate charging status. A full charge typically takes 5.5-6.5 hours.
4.2 Açma/Kapatma
To power on the unit, press and hold the main power button for a few seconds until the LCD screen illuminates. To power off, press and hold the main power button again until the screen turns off.
5. Kullanım Talimatları
5.1 Şarj Yöntemleri
Your ALLWEI Portable Power Station can be recharged using three methods:
- AC Duvar Şarjı: Connect the included AC adapter and cord to a standard wall outlet. Full charge in 5.5-6.5 hours.
- Araç Şarjı: Use the included car cable to charge from your vehicle's 12V outlet. Full charge in 4.5-5.5 hours.
- Güneş Paneli Şarjı: Connect a compatible 100W solar panel (not included) to the DC input port. Full charge in 3-4 hours under full sunlight.
Figure 5.1: Various Charging Methods for the Power Station.
5.2 Cihazlara Güç Verme
The power station offers various output ports to power a wide range of devices:
- AC Prizleri: Press the 'AC' button to activate the 110V AC outlets. Ideal for laptops, small appliances, and CPAP machines.
- DC Çıkışları: Press the 'DC' button to activate the 12V DC 5521 ports and the car outlet. Suitable for DC-powered devices.
- USB Bağlantı Noktaları: The USB-A QC3.0 and PD 60W USB-C ports are always active when the unit is on, providing fast charging for smartphones, tablets, and other USB devices.
Figure 5.2: Powering Various Devices with the ALLWEI Portable Power Station.
5.3 LED Işık Modu
The power station includes a built-in LED light with multiple modes:
- Press the light button once for low brightness.
- Press again for medium brightness.
- Press a third time for high brightness.
- Press and hold for SOS mode, which flashes a distress signal.
Figure 5.3: LED Light Modes.
5.4 App Remote Control and AC Charging Mode
The power station may support app remote control and various AC charging modes (Quiet, Normal, Speed). Refer to the official ALLWEI app for detailed instructions on connecting and utilizing these features.
Video 5.4: Demonstration of App Remote Control and AC Charging Modes. This video illustrates how to use the mobile application to control the power station and switch between different AC charging speeds.
6. Güvenlik ve Koruma
The ALLWEI Portable Power Station is equipped with a multi-protect system to ensure safe operation and protect your devices. The built-in Battery Management System (BMS) and MPPT controller continuously monitor and manage the battery, offering protection against:
- Kısa devre
- Aşırı akım
- Aşırı yük
- Düşük hacimlitage
- aşırı sestage
- Aşırı sıcaklık
- Düşük sıcaklık
An icon on the LCD screen will flash to indicate a protection event. The unit also features a pure sine wave output for sensitive electronics.
Figure 6.1: Multi-Protect System Features.
7. Bakım
Enerji santralinizin uzun ömürlü ve optimum performans göstermesi için aşağıdaki bakım yönergelerini izleyin:
- Depolamak: Üniteyi serin, kuru ve doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak bir yerde saklayın.
- Şarj Sıklığı: If storing for extended periods, recharge the unit every 3-6 months to maintain battery health.
- Temizlik: Use a dry, soft cloth to clean the exterior. Do not use abrasive cleaners or immerse the unit in water.
- Havalandırma: Ensure the ventilation openings are clear of obstructions during use to prevent overheating.
8. Sorun Giderme
If you encounter issues with your ALLWEI Portable Power Station, refer to the following common problems and solutions:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Ünite açılmıyor | Pil bitmiş; Güç düğmesine doğru şekilde basılmamış. | Charge the unit using an AC adapter or solar panel. Press and hold the power button firmly for 3 seconds. |
| AC çıkışı çalışmıyor | AC output not activated; Device draws too much power; Overload protection triggered. | Press the 'AC' button to activate. Ensure device power consumption is within 300W. Disconnect device, turn off AC, then turn on again. |
| DC/USB output not working | DC output not activated (for DC ports); Device not compatible; Cable faulty. | Press the 'DC' button to activate (for DC ports). Try a different device or cable. |
| Unit not charging via solar panel | Solar panel not connected correctly; Insufficient sunlight; Panel is not 100W or compatible. | Ensure secure connection. Place panel in direct sunlight. Verify panel specifications. |
| LCD screen displays an error icon | Protection mechanism activated (e.g., over-temperature, overload). | Refer to the manual's safety section for specific icon meanings. Disconnect devices, allow unit to cool down, then restart. |
If the problem persists after attempting these solutions, please contact ALLWEI customer support.
9. Özellikler
Detailed technical specifications for the ALLWEI Portable Power Station 300W:
| Özellik | Şartname |
|---|---|
| Model Adı | SGR-PPS300-2 |
| Pil Kapasitesi | 280Wh |
| AC Çıkışı | 300W (Saf Sinüs Dalgası) |
| DC 5521 Çıkış | 3x 12V 3A |
| USB-A QC3.0 Çıkışı | 2x Ports |
| USB-C PD Çıkışı | 1x 60W Port |
| DC Car Outlet | 1x Bağlantı Noktası |
| AC Input (Wall Charging) | Tam şarj için 5.5-6.5 saat |
| Araba Şarj Girişi | Tam şarj için 4.5-5.5 saat |
| Solar Şarj Girişi | 3-4 hours for full charge (with 100W solar panel) |
| Boyutlar (UxGxY) | 8.86 x 4.53 x 8.07 inç |
| Net ağırlığı | 6.5 kilo |
| Charge Cycle Life | 1500 kez |
| Malzeme | Plastik |
| Renk | Siyah |
10. Garanti ve Destek
ALLWEI provides a 2-year manufacturer's warranty for this product, covering defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For technical assistance, troubleshooting, or warranty inquiries, please contact ALLWEI customer support:
- E-posta: destek@allweipower.com
For more information, you may also visit the official ALLWEI store on Amazon: ALLWEI Store
