Liectroux G7 Robot Vacuum Cleaner

giriiş

The Liectroux G7 is an advanced 4-in-1 robot vacuum cleaner designed to simplify your home cleaning routine. It features vacuuming, sweeping, mopping, and an automatic self-emptying base. Equipped with intelligent laser navigation, app control, and compatibility with voice assistants like Alexa and Google Assistant, the G7 offers a comprehensive and hands-free cleaning experience. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.

Güvenlik Talimatları

Please read all safety instructions carefully before using the appliance and keep this manual for future reference.

• Çocukların veya evcil hayvanların robotla oynamasına izin vermeyin. Robot çalışırken çocukları gözetim altında tutun.
• Yalnızca üretici tarafından sağlanan orijinal güç adaptörünü ve şarj tabanını kullanın.
• Do not use the robot in environments with open flames, flammable or explosive materials.
• Ensure the robot is not exposed to water or other liquids. Do not use it in wet environments.
• Temizliğe başlamadan önce, kabloların birbirine dolanmasını veya hasar görmesini önlemek için yerdeki gevşek kabloları, küçük nesneleri veya kırılgan eşyaları kaldırın.
• Do not use the robot to clean sharp objects, large debris, or liquids.
• Herhangi bir bakım veya temizlik işlemine başlamadan önce robotu kapatın ve şarj istasyonunun fişini çekin.
• Robotu kendiniz tamir etmeye veya değiştirmeye çalışmayın. Yardım için yetkili servis personeliyle iletişime geçin.

Paket İçeriği

Paket açıldığında tüm eşyaların mevcut ve iyi durumda olduğundan emin olun:

• Liectroux G7 Robot Vacuum Cleaner
• Self-Emptying Charging Base
• Güç Kablosu
• Yan Fırçalar (2 çift)
• Mop Cloth (2 units)
• Disposable Dust Bags (2 units, 1 pre-installed in base)
• Temizleme Aracı
• Uzaktan kumanda
• Kullanım Kılavuzu (bu belge)

Ürün Bileşenleri

Robot Süpürge

The Liectroux G7 robot vacuum features a sleek, round design with a top-mounted LiDAR sensor for precise navigation. It includes a main brush underneath for deep cleaning, two side brushes for edge and corner cleaning, and a water tank for mopping. Various sensors around its perimeter help detect obstacles and prevent falls. The charging contacts on the bottom allow it to connect with the self-emptying base.

Kendi Kendini Boşaltan Baz

The self-emptying base serves as both a charging station and an automatic dust collection unit. After each cleaning cycle, the robot returns to the base, and the collected dust and debris are automatically transferred from the robot's internal dustbin into a high-capacity disposable dust bag located within the base. This significantly reduces the frequency of manual dustbin emptying.

Kurmak

1. Paketten çıkarma

Carefully remove all components from the packaging. Remove any protective films or packing materials from the robot and the charging base.

2. Şarj İstasyonunun Yerleştirilmesi

Place the self-emptying charging base against a wall in an open area, ensuring there is at least 0.5 meters of clear space on both sides and 1.5 meters in front. Avoid placing it near stairs or in areas with direct sunlight. Plug the power cord into the base and then into a wall outlet.

3. İlk Ücret

Place the robot onto the charging base, ensuring the charging contacts align. The robot will begin charging automatically. For the first use, allow the robot to fully charge, which may take several hours.

4. Installing Side Brushes and Mop Cloth

• Turn the robot over. Snap the side brushes into their designated slots.
• Fill the water tank with clean water. Attach the mop cloth securely to the water tank. Slide the water tank into the back of the robot until it clicks into place.

5. Uygulama Bağlantısı (Wi-Fi)

Download the Liectroux app from your smartphone's app store. Follow the in-app instructions to connect your robot to your home Wi-Fi network. This will enable smart features like mapping, remote control, and scheduling.

Kullanım Talimatları

Temizleme Modları

• Otomatik Temizlik: Robot, evinizi akıllıca haritalandırıyor ve sistematik bir şekilde temizlik yapıyor.
• Nokta Temizliği: Robotu belirli küçük bir alanı yoğun bir şekilde temizlemesi için yönlendirir.
• Bölge Temizliği: Robotun temizleyeceği belirli alanları harita üzerinde tanımlamanıza olanak tanır.
• Planlı Temizlik: Set specific times and days for the robot to automatically start cleaning.

Uygulamayı Kullanma

The Liectroux app provides full control over your G7 robot. You can view real-time cleaning maps, set virtual walls or no-go zones, select specific rooms or areas to clean, adjust suction power (4 levels), and control water flow for mopping (3 levels). The app also allows you to schedule cleaning tasks and monitor the robot's status and maintenance alerts.

Voice Control (Alexa/Google Assistant)

The Liectroux G7 is compatible with Amazon Alexa and Google Assistant. Once connected through the app, you can use voice commands to start, stop, or send the robot back to its charging base. Refer to the app's integration guide for specific voice commands.

Carpet Boost Feature

The G7 is equipped with an ultrasonic carpet recognition system. When the robot detects a carpet, it automatically increases its suction power to a maximum level (turbo mode) to ensure a deeper clean. Once it moves off the carpet, the suction power returns to its previous setting.

Bakım

Regular maintenance ensures the longevity and optimal performance of your Liectroux G7.

1. Emptying the Dustbin/Self-Emptying Base

The self-emptying base automatically transfers dust from the robot's internal bin to a disposable dust bag. These bags have a capacity of up to 60 days of debris. Replace the dust bag in the base when indicated by the app or when full. The robot's internal dustbin should also be checked and cleaned periodically, especially if the self-emptying function is not used or if large debris is collected.

2. Cleaning Main Brush

Remove the main brush cover and the main brush. Use the provided cleaning tool to remove hair and debris tangled around the brush. Clean the brush bearings. Reinstall the main brush and cover.

3. Yan Fırçaların Temizlenmesi

Periodically check the side brushes for wear or entanglement. Remove any hair or debris. If brushes are worn, replace them with new ones.

4. Filtrelerin Temizlenmesi

Remove the dustbin from the robot and separate the filter assembly. Tap the HEPA filter gently to remove dust. The primary filter can be rinsed with water, but ensure it is completely dry before reinstallation.

5. Sensörlerin ve Şarj Kontaklarının Temizlenmesi

Wipe all sensors (cliff sensors, wall sensor, LiDAR sensor window) and the charging contacts on both the robot and the base with a clean, dry cloth. Dust and debris can interfere with navigation and charging.

6. Mop Cloth Care

After each mopping session, remove the mop cloth and rinse it thoroughly with water. Allow it to air dry completely before reattaching. Do not use strong detergents or bleach on the mop cloth.

Sorun giderme

If you encounter issues with your Liectroux G7, refer to the table below for common problems and solutions.

Özellikler

Garanti ve Destek

The Liectroux G7 Robot Vacuum Cleaner comes with a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and duration. Typically, a 1-year warranty against manufacturing defects is provided.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact the official Liectroux Brasil seller or visit their authorized service channels. Keep your purchase receipt as proof of purchase for warranty claims.