DBPOWER 1600A 18000mAh Taşınabilir Araç Akü Takviye Cihazı (Model DJS90) Kullanım Kılavuzu

1. Ürün Bittiview

The DBPOWER DJS90 Portable Car Jump Starter is a versatile device designed to provide emergency jump-starting for vehicles, act as a portable power bank, and offer essential lighting functions. It features a high peak current of 1600A and an 18000mAh battery capacity, capable of starting various 12V vehicles.

Figure 1: DBPOWER DJS90 Portable Car Jump Starter and included accessories.

Temel Özellikler:

• Vehicle Jump Starting: 1600A peak current for 12V vehicles (up to 7.5L gas / 5.5L diesel engines).
• Taşınabilir Güç Bankası: 18000mAh capacity with 2 USB outputs for charging smartphones, tablets, and other devices.
• Acil Durum LED Işığı: Features stable, strobe, and SOS signal modes.
• Güvenlik Korumaları: Heavy-duty smart clamps with low/high voltage, over-temperature, short-circuit, reverse polarity, and jump starter time-out protection.
• Dayanıklılık: Operates in temperatures from -4°F to 140°F.

2. Paket İçeriği

Paketinizde tüm öğelerin mevcut olduğundan emin olun:

Figure 2: What's in the Box - DBPOWER DJS90 Jump Starter and accessories.

• 1x DBPOWER DJS90 Jump Starter Unit
• 1x Akıllı Jumper Clamps
• 1x USB Line (Charging Cable)
• 1x Kullanım Kılavuzu
• 1x Hard Shell Storage Case

3. Kurulum ve Şarj

Before initial use, fully charge the jump starter. It is recommended to recharge the device after each use to maintain optimal battery life.

Jump Starter'ı Şarj Etme:

1. Locate the USB input port on the jump starter.
2. Connect the provided USB charging cable to the input port.
3. Plug the other end of the USB cable into a suitable USB power adapter (not included) or a car's USB port.
4. The LED display will indicate the charging progress. Ensure the device is fully charged before storing or using for jump-starting.

Figure 3: Multifunction ports on the DBPOWER DJS90.

4. Kullanım Talimatları: Aracın Aküsünü Çalıştırma

Always ensure the jump starter is at least 50% charged before attempting to jump-start a vehicle.

Adım Adım Kılavuz:

1. Aracı Hazırlayın: Turn off the vehicle's ignition and all accessories. Engage the parking brake.
2. Connect Jumper Cables to Jump Starter: Open the protective flap on the jump starter and firmly insert the blue end of the intelligent jumper clamps into the car jump start output port.
3. Cl'yi bağlayınamps Pil için: Kırmızı (pozitif, +) klibi takın.amp to the positive terminal of the vehicle's battery. Attach the black (negative, -) clamp to the negative terminal of the vehicle's battery. Ensure a secure connection.
4. Gösterge Işığını Kontrol Edin: The indicator light on the intelligent jumper clamps should turn solid green, indicating a safe and ready connection. If it flashes or shows a different color, refer to the troubleshooting section.
5. Aracı Başlat: Enter your vehicle and start the engine. If the vehicle does not start immediately, wait 30 seconds before trying again. Do not attempt more than 3 consecutive starts.
6. Cl'yi kaldıramps: Once the vehicle starts, immediately remove the black (negative) clamp from the vehicle battery, followed by the red (positive) clamp. Then, disconnect the jumper clampatlama başlatıcısından.

Figure 4: Instructions to Start Your Vehicle.

5. Operating Instructions: Power Bank & LED Light

Güç Bankası Olarak Kullanmak:

The DJS90 can charge various electronic devices via its USB output ports.

1. Connect your device's USB charging cable to one of the jump starter's USB output ports.
2. Atlama marşı cihazınızı otomatik olarak şarj etmeye başlayacaktır.
3. The 18000mAh capacity can provide multiple charges for smartphones, tablets, and other small electronics.

Figure 5: Power Bank Capabilities.

LED Işığını Kullanma:

Dahili LED ışık, farklı durumlar için birden fazla mod sunar.

1. Locate the power button for the LED light (often integrated with the main power button or a dedicated light button).
2. Press and hold the button to turn on the stable light mode.
3. Press the button again to cycle through strobe mode, SOS signal mode, and then off.

Figure 6: Four Lighting Modes.

6. Güvenlik Özellikleri

The DBPOWER DJS90 is equipped with intelligent jumper clampBirden fazla güvenlik koruması sağlayan özellikler:

Şekil 7: Akıllı Clamps Safety Protections.

• Düşük/Yüksek Hacimtage Koruma: Prevents damage from incorrect voltage seviyeleri.
• Aşırı Sıcaklık Koruması: Shuts down if the device gets too hot.
• Kısa devre koruması: Kazara kısa devrelerden kaynaklanan hasarları önler.
• Ters Polarite Koruması: Cl hatası durumunda uyarı verir ve çalışmayı engeller.ampyanlış bağlanmış.
• Jump Starter Time-Out Protection: Automatically shuts off after a period of inactivity to conserve power.

7. Bakım

• Düzenli Olarak Şarj Edin: For optimal performance and longevity, fully recharge the jump starter after each use and at least every three months if stored.
• Depolamak: Store the device in its hard shell case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Temizlik: Wipe the unit and clamps with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.

8. Sorun Giderme

• Araç Çalışmıyor: cl'yi sağlayınamps are securely connected to the correct battery terminals. Check the jump starter's battery level. If the intelligent clamps' indicator light is not solid green, refer to the manual for specific error codes or try reconnecting.
• Jump Starter Not Charging: Verify the charging cable and adapter are working correctly. Ensure the charging port on the jump starter is clean and free of debris.
• LED Işık Çalışmıyor: Check if the jump starter is powered on. Press and hold the light button to activate.

9. Özellikler

10. Garanti ve Destek

DBPOWER is committed to ensuring customer satisfaction. If you have any questions or require assistance with your product, please do not hesitate to contact our customer support team. We aim to respond to all inquiries within 24 hours.

For support, please visit the official DBPOWER websiteye gidin veya ürün ambalajınızda bulunan iletişim bilgilerine başvurun.