HUI NA Uzaktan Kumandalı Ekskavatör Oyuncak 1:18 Kullanım Kılavuzu

1. Önemli Güvenlik Bilgileri

Please read all safety instructions carefully before operating the remote control excavator. Failure to follow these instructions may result in injury or damage to the product.

• Pil Güvenliği: Batteries should not touch water. Ensure batteries are inserted with correct polarity. Do not mix old and new batteries, or different types of batteries.
• Yetişkin Denetimi: This product is recommended for ages 8 years and up. Adult supervision is advised, especially during initial setup and operation.
• Çalışma Ortamı: Operate the excavator in open, clear areas away from obstacles, people, and pets. Avoid operating near water bodies or in extreme weather conditions.
• Şarj: Use only the provided USB charging cable. Do not overcharge batteries. Disconnect the charger once charging is complete.
• Bakım: Keep the excavator clean and free from dirt and debris. Do not attempt to modify or disassemble the product.

2. Ürün Bittiview

The HUI NA 1:18 scale remote control excavator is a highly simulated construction vehicle designed for realistic digging experiences. It features an 11-channel remote control system, allowing for precise and versatile movements.

Figure 2.1: The HUI NA 1:18 scale remote control excavator with its remote control and included batteries.

Temel Özellikler:

• High Simulation Design: Constructed with ABS material, alloy body, metal shovel, and thickened double tracks for durability and realistic appearance.
• 2.4 GHz Uzaktan Kumanda: Offers long-distance control (approx. 25M) with anti-interference capabilities, allowing multiple units to operate simultaneously.
• 11-Channel Multi-Function: Independent control of the large arm, small arm, digging bucket, 360° rotating table, and double tracks.
• Realistic Lighting & Sound: Features working lights and authentic sound effects for an immersive experience.
• Auto Demo Function: Önceden programlanmış bir gösterim dizisini başlatır.
• Şarj Edilebilir Pil: Equipped with a 3.7V 500mAh Li-ion battery and USB charging cable for convenient recharging.

3. Kutuda Neler Var?

Kutuyu açtığınızda lütfen aşağıdaki bileşenlerin tümünün mevcut olduğundan emin olun:

• 1 x HUI NA RC Excavator
• 1 x 2.4G Frequency Remote Control
• 1 x USB Şarj Kablosu
• 3 x LiPo Batteries (3.7V 500mAh SM3P)
• 1 x Tornavida

4. Kurulum

4.1 Pil Kurulumu

For the Excavator:

1. Ekskavatörün alt tarafında bulunan akü bölmesini bulun.
2. Pil bölmesi kapağını açmak için verilen tornavidayı kullanın.
3. Connect one of the 3.7V 500mAh Li-ion batteries to the excavator's power connector, ensuring correct polarity.
4. Pili dikkatlice bölmenin içine yerleştirin ve kapağı vidayla sabitleyerek kapatın.

Figure 4.1: The excavator uses a rechargeable Li-ion battery. Ensure proper connection and secure the battery compartment.

Uzaktan Kumanda İçin:

1. Uzaktan kumandanın arkasındaki pil bölmesini bulun.
2. Pil bölmesinin kapağını açın.
3. 2 adet AA pili (dahil değildir) doğru kutuplara (+/-) dikkat ederek bölmeye yerleştirin.
4. Pil bölmesinin kapağını kapatın.

4.2 Charging the Excavator Battery

The included 3.7V 500mAh Li-ion battery requires approximately 50 minutes for a full charge.

1. Connect the Li-ion battery to the USB charging cable.
2. Plug the USB charging cable into a standard USB power adapter (e.g., computer USB port, wall charger).
3. The indicator light on the USB cable will show the charging status (refer to cable instructions for specific light behavior).
4. Once fully charged, disconnect the battery from the charging cable and store it safely.

4.3 Uzaktan Kumandayı Eşleştirme

The excavator and remote control are pre-paired from the factory. If re-pairing is needed:

1. Ensure both the excavator and remote control have fresh batteries.
2. Ekskavatörün güç şalterini açın.
3. Uzaktan kumandanın güç düğmesini açın.
4. The remote control and excavator should automatically connect. If not, turn both off and repeat the process.

5. Kullanım Talimatları

Ekskavatörü çalıştırmadan önce uzaktan kumandanın düzenini ve işlevlerini iyice öğrenin.

Figure 5.1: Operating the excavator with the 2.4GHz remote control.

5.1 Temel Kontroller

• İleri geri: Use the left joystick to move the excavator forward or backward.
• Sola/Sağa Dön: Use the left joystick to steer the excavator left or right while moving.
• In-situ Rotation: Use both joysticks in opposite directions to rotate the excavator in place (double tracks).

5.2 11-Channel Functions

The 11 channels allow for comprehensive control over the excavator's movements:

Figure 5.2: The 11-channel system provides extensive control over the excavator's functions.

• Large Arm Control: Use specific buttons/joystick movements on the remote to raise and lower the main arm.
• Small Arm Control: Use specific buttons/joystick movements to extend and retract the secondary arm.
• Digging Bucket Control: Use specific buttons/joystick movements to open and close the digging bucket.
• 360° Rotating Table: Use dedicated buttons or a joystick to rotate the excavator's cabin and arm assembly 360 degrees left or right without limitation.

Figure 5.3: The excavator's cabin can rotate 360 degrees, allowing for versatile digging and maneuvering.

5.3 Işıklar ve Sesler

The excavator features realistic lights and sounds to enhance the play experience.

Figure 5.4: The excavator includes functional lights and realistic sound effects.

• Işıklar: The excavator's headlights and other operational lights will illuminate when the vehicle is powered on or specific functions are activated.
• Sesler: Engine sounds, digging sounds, and other operational noises will play during use. Refer to the remote control for dedicated sound buttons if available.

5.4 Auto Demo Function

Press the 'Auto Demo' button on the remote control to initiate a pre-programmed demonstration sequence. The excavator will perform a series of movements and functions automatically.

6. Bakım

Proper maintenance will extend the lifespan of your HUI NA excavator.

• Temizlik: After use, especially in sandy or muddy conditions, gently wipe down the excavator with a dry or slightly damp Bez. Sert kimyasallar kullanmayın veya ürünü suya batırmayın.
• Depolamak: Store the excavator and remote control in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from both the excavator and remote control if storing for extended periods to prevent leakage.
• Ray Kontrolü: Periodically check the tracks for any trapped debris or damage. Clean as necessary.

7. Sorun Giderme

If you encounter any issues with your HUI NA excavator, please refer to the following table for common problems and solutions.

8. Özellikler

9. Garanti ve Destek

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact the retailer.

If you have any questions, require technical assistance, or need to report an issue with your HUI NA Remote Control Excavator, please contact the manufacturer or your point of purchase. Provide your model number (HUI NA-1661) and a detailed description of the issue for faster support.