MXR Phase 90 50th-Anniversary Pedal Instruction Manual

giriiş

This manual provides instructions for the proper setup, operation, and maintenance of your MXR Phase 90 50th-Anniversary Pedal. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

Güvenlik Bilgileri

• Use only the specified power adapter (9 Volts DC, 2.1mm barrel connector, center-negative).
• Do not expose the pedal to moisture or extreme temperatures.
• Do not attempt to open or modify the pedal casing.
• Çocukların erişemeyeceği yerde saklayınız.

Ürün Bittiview

The MXR Phase 90 is a classic phaser guitar effects pedal known for its distinctive modulation sound. This 50th-anniversary edition features a special gold finish and simple, single-knob operation.

Resim: Yukarıdan aşağıya view of the MXR Phase 90 50th-Anniversary Pedal. The pedal is gold-colored with a single black 'SPEED' knob on the top left, an input jack on the right side, an output jack on the left side, and a footswitch with an LED indicator in the center. The MXR logo and 'phase 90' are visible on the top surface.

Kurmak

1. Güç Bağlantısı: Connect a 9-volt DC AC adapter (not included) to the power input jack on the side of the pedal. Ensure the adapter has a 2.1mm barrel connector and center-negative polarity.


Resim: Yan view of the MXR Phase 90 50th-Anniversary Pedal showing the power input jack (left) and the instrument input jack (right). The pedal is gold with a black 'SPEED' knob visible on the top surface.

2. Enstrüman Girişi: Connect your instrument (e.g., guitar) to the INPUT jack on the right side of the pedal using a standard 1/4-inch instrument cable.
3. Amplifier Çıktı: Pedalın sol tarafındaki OUTPUT jakını cihazınıza bağlayın. amplifier or the next pedal in your signal chain using a standard 1/4-inch instrument cable.

Resim: Üst view of the MXR Phase 90 50th-Anniversary Pedal, highlighting the 'INPUT' and 'OUTPUT' labels near the respective jacks. The gold finish and black 'SPEED' knob are prominent.
4. Atama: Place the pedal on a stable surface or integrate it into your pedalboard.

Kullanım Talimatları

Kontroller

• HIZ Düğmesi: This is the only control on the Phase 90. Turning the knob clockwise increases the speed of the phasing effect, while turning it counter-clockwise decreases the speed. Experiment with different settings to achieve various modulation sounds, from subtle sweeps to fast, watery warbles.


Resim: Yakın çekim view of the black 'SPEED' knob on the MXR Phase 90 pedal. The knob has a white indicator line for setting the phase speed.

• Ayak pedalı: Press the footswitch to engage or bypass the phasing effect. The LED indicator will illuminate when the effect is active.

Resim: Yakın çekim view of the chrome footswitch and the small red LED indicator on the MXR Phase 90 pedal. The footswitch is used to activate or deactivate the effect.

Temel İşlemler

1. Ensure all connections (power, input, output) are secure.
2. Aç şunu ampcankurtaran.
3. Press the footswitch to activate the Phase 90. The LED will light up.
4. Adjust the SPEED knob to achieve your desired phasing etkisi.
5. To bypass the effect, press the footswitch again. The LED will turn off.

Bakım

• Temizlik: Wipe the pedal with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Depolamak: Store the pedal in a dry environment, away from direct sunlight and extreme temperatures, when not in use.
• Pil Değişimi: This pedal is designed for AC adapter use. There is no internal battery compartment.

Sorun giderme

Ses Yok

• Tüm kablo bağlantılarını kontrol edin (cihaz, amp(kaldırıcı, güç).
• Ensure the power adapter is correctly connected and providing power (LED should light up when engaged).
• Test with different cables and a different power supply if available.
• Enstrümanınızın doğruluğunu onaylamak için pedalı devre dışı bırakın. ampLifier doğru çalışıyor.

Etkisi Etkileyici Değil

• Ensure the power adapter is connected and functional.
• Press the footswitch firmly. The LED should illuminate when the effect is active.

İstenmeyen Gürültü

• Tüm kabloların korumalı ve iyi durumda olduğundan emin olun.
• Check for ground loops in your setup. Try isolating the power supply.
• Ensure the power adapter is rated correctly for the pedal (9V DC, center-negative).

Özellikler

Garanti Bilgileri

This MXR product is covered by a 2-year warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, or unauthorized repair. Please retain your proof of purchase for warranty claims.

Destek

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact MXR customer support through their official website or authorized service centers. Refer to the MXR webEn güncel iletişim bilgileri için sitemizi ziyaret edin.