EVURU Single Phase LCD Digital Energy Meter

1. Giriş

This manual provides detailed instructions for the installation, operation, and maintenance of the EVURU Single Phase LCD Digital Energy Meter, Model DDS662 (110V). This device is designed to accurately measure and display electrical energy consumption (kWh), voltage, current, and power in single-phase AC circuits. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

2. Güvenlik Bilgileri

UYARI:

Electrical installation should only be performed by qualified personnel. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Sayaç takmadan veya bakımını yapmadan önce daima elektriği kesin.
• Kablolama şemasına göre tüm kablo bağlantılarının sağlam ve doğru olduğundan emin olun.
• Do not operate the meter in environments exceeding its specified temperature and humidity ranges.
• Do not attempt to open or repair the meter. Refer all servicing to qualified personnel.
• This meter is designed for indoor use in a dry environment.

3. Ürün Bittiview

The EVURU DDS662 is a compact, single-phase digital energy meter featuring an LCD display. It is designed for DIN rail mounting and provides accurate measurements of various electrical parameters.

Temel Özellikler:

• LCD display with backlight for clear readings.
• Measures total Energy (kWh), temporary Energy (kWh), real Voltage, real Current, and real Power.
• Pulse LED indicator for meter operation.
• 35mm DIN rail installation.
• Temporary kWh reset function.

Resim 3.1: Üzeriview of DDS662, DDS667, and DDS668 models, showing their LCD displays and basic information. The DDS662 model is on the left.

Image 3.2: Feature comparison table highlighting capabilities like LCD display, electricity consumption, voltage, power, current, backlight, temporary power, manual switching, power factor, frequency, and zeroable functions across DDS662, DDS667, and DDS668 models.

4. Özellikler

Image 4.1: Detailed dimensions (36mm width, 78.5mm height, 45mm depth, 65.8mm height from rail) and a parameter table for DDS667/DDS668, which are largely applicable to the DDS662 model.

5. Kurulum

The EVURU DDS662 energy meter is designed for 35mm DIN rail mounting. Ensure power is disconnected before proceeding with installation.

5.1 Mounting on DIN Rail

1. Elektrik panonuzda uygun bir 35 mm DIN rayı bulun.
2. Ölçüm cihazının montaj klipslerini DIN rayıyla hizalayın.
3. Press the meter firmly onto the rail until it clicks into place. Ensure it is securely fastened.

Image 5.1: The DDS662 meter shown securely mounted on a standard 35mm DIN rail, illustrating the ease of installation.

5.2 Kablo Bağlantıları

The DDS662 meter supports two primary wiring modes. Always refer to the diagram and ensure correct polarity (Neutral 'N' and Live 'L').

• Mode 1: Upper Input, Lower Output - Power enters the top terminals and exits the bottom terminals.
• Mode 2: Lower Input, Upper Output - Power enters the bottom terminals and exits the top terminals.

For the DDS662, the standard wiring is typically upper input and lower output, as depicted in the product images. Connect the Neutral (N) and Live (L) wires from your power source to the input terminals, and connect your load to the output terminals.

Resim 5.2: Yakın çekim view of the DDS662 meter, showing the input/output terminals labeled 'N' and 'L', along with protective caps for unused terminals.

Image 5.3: Wiring methods for similar models (DDS667 and DDS668), demonstrating the two common wiring configurations: upper input/lower output and lower input/upper output. The DDS662 follows similar principles.

After wiring, ensure all terminal screws are tightened to prevent loose connections and potential hazards. Replace any protective terminal caps if provided.

6. Kullanım Talimatları

Once installed and powered, the meter will automatically begin measuring. The LCD display shows various parameters which can be cycled through.

6.1 Ekran İşlevleri

The meter is designed to display the following parameters:

• Toplam Enerji (kWh): This value accumulates and cannot be reset.
• Temporary Energy (kWh): This value can be reset to zero.
• Real Voltage(V): Anlık hacimtage okuma.
• Real Current (A): Instantaneous current reading.
• Gerçek Güç (W): Instantaneous power reading.

The pulse LED will flash to indicate the meter is actively measuring energy consumption.

6.2 Resetting Temporary kWh

To reset the temporary kWh reading to zero:

1. Locate the "PRESS" button on the front of the meter (if applicable for DDS662, some models like DDS667 have it). For DDS662, manual switching between parameters is typically automatic or via a hidden button if present. The product description states "manual pressing" for display, and "Hold the button for 6 seconds to Reset the temporary kWh". If no visible button, it might be an internal or less obvious control. Assuming a button exists for this function.
2. Düğmeyi yaklaşık 6 saniye basılı tutun.
3. The temporary kWh value will reset to 0.0.

Note: The total kWh value cannot be reset.

7. Bakım

The EVURU DDS662 energy meter requires minimal maintenance.

• Sayaç cihazını temiz ve tozdan arındırılmış halde tutun. Temizlik için yumuşak, kuru bir bez kullanın. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
• Periodically check wiring connections to ensure they remain tight and secure.
• Çalışma ortamının belirtilen sıcaklık ve nem aralıklarında kalmasını sağlayın.
• Do not expose the meter to direct sunlight or extreme heat sources.

8. Sorun Giderme

9. Garanti ve Destek

EVURU products are manufactured to high-quality standards. For warranty information and technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your purchase receipt as proof of purchase.

For further assistance, please visit the EVURU official websitesine bakın veya müşteri hizmetleri departmanıyla iletişime geçin.