Sena 3S Plus Bluetooth System Universal Microphone Kit User Manual

1. Giriş

This manual provides detailed instructions for the proper use and maintenance of your Sena 3S Plus Bluetooth System Universal Microphone Kit. Please read this manual thoroughly before operating the device to ensure optimal performance and safety.

The Sena 3S Plus is a compact and powerful Bluetooth intercom system designed for motorcycle helmets, offering two-way HD intercom communication, music listening, and phone call capabilities.

2. Paket İçeriği

Paketinizde tüm bileşenlerin mevcut olduğunu doğrulayın:

• Sena 3S Plus Bluetooth System Universal Microphone
• USB-C Şarj Kablosu
• Mounting Accessories (e.g., hook and loop fasteners, speaker pads)
• Kullanım Kılavuzu (bu belge)

Image 1: Sena 3S Plus Bluetooth System Universal Microphone Kit. This image displays the main unit and included accessories.

3. Ürün Bittiview

Familiarize yourself with the main components and controls of your Sena 3S Plus unit.

3.1 Ana Ünite

• Ana Düğme: Used for power on/off, pairing, and intercom functions.
• Sesi Açma Düğmesi: Increases volume, navigates menus.
• Sesi Kısma Düğmesi: Decreases volume, navigates menus.
• USB-C Bağlantı Noktası: Şarj ve yazılım güncellemeleri için.
• Mikrofon: Integrated for voice communication.
• Konuşmacılar: Ses çıkışı için.

Note: Specific button locations and designs may vary slightly depending on the universal microphone kit type (boom or wired).

4. Kurulum ve Kurulum

Follow these steps to install the Sena 3S Plus into your helmet.

4.1 Ana Ünitenin Montajı

1. Konum seç: Select a flat surface on the left side of your helmet, near the bottom edge, for optimal microphone and speaker placement.
2. Temiz Yüzey: Clean the chosen area thoroughly with an alcohol wipe and let it dry completely.
3. Attach Hook and Loop Fastener: Peel the backing from the hook and loop fastener (velcro) and firmly press it onto the helmet surface.
4. Ana Üniteyi Takın: Align the main unit with the fastener and press firmly to secure it.

4.2 Hoparlör Kurulumu

1. Locate Ear Pockets: Identify the ear pockets inside your helmet.
2. Attach Speaker Pads: If necessary, use the provided speaker pads to adjust the speaker depth for comfort and clear audio.
3. Insert Speakers: Place the speakers into the ear pockets, ensuring they are centered over your ears. Route the speaker wires neatly under the helmet padding.

4.3 Mikrofon Yerleşimi

The 3S Plus comes with a universal microphone kit, which typically includes options for boom or wired microphones. Choose the one suitable for your helmet type (open-face/modular for boom, full-face for wired).

1. Boom Mikrofon: Attach the boom microphone to the inside of the helmet, positioning the microphone capsule approximately 1-2 cm from your mouth.
2. Kablolu Mikrofon: For full-face helmets, attach the wired microphone to the inside of the chin bar, ensuring it is close to your mouth and not obstructed.

Önemli: Ensure all wires are tucked away and do not interfere with helmet removal or comfort.

5. Kullanım Talimatları

5.1 Açma/Kapatma

• Güç Açık: Basılı tutun Ana Düğme for 1 second. The LED will flash blue.
• Kapat: Basılı tutun Ana Düğme for 5 seconds. The LED will flash red and the unit will power off.

5.2 Ses Ayarı

• Sesi arttır: Dokunun Sesi Açma Düğmesi.
• Sesi Azalt: Dokunun Ses Kısma Düğmesi.

5.3 Şarj Etme

The Sena 3S Plus features USB-C charging.

1. Connect the supplied USB-C cable to the USB-C port on the main unit.
2. Kablonun diğer ucunu bir USB güç kaynağına (örneğin, bilgisayarın USB portu, USB duvar adaptörü) bağlayın.
3. The LED will glow red during charging and turn blue when fully charged.

A full charge typically takes approximately 2.5 hours and provides up to 8 hours of talk time.

6. Bluetooth Eşleştirme

6.1 Cep Telefonuyla Eşleştirme

1. With the 3S Plus powered off, press and hold the Ana Düğme for 5 seconds until the LED flashes red and blue alternately. You will hear "Phone pairing".
2. Cep telefonunuzda Bluetooth'u etkinleştirin ve cihazları arayın.
3. Select "Sena 3S Plus" from the list of detected devices.
4. If prompted, enter PIN "0000".
5. Once paired, the LED will flash blue every 5 seconds.

6.2 Pairing with another Sena Headset for Intercom

The Sena 3S Plus supports two-way HD intercom communication.

1. Ensure both 3S Plus units are powered on.
2. On Ünite A, tuşuna basın ve basılı tutun Ana Düğme for 5 seconds until the LED flashes red and blue alternately.
3. On Birim B, tuşuna basın ve basılı tutun Ana Düğme for 5 seconds until the LED flashes red and blue alternately.
4. The units will automatically search for each other and pair. Once paired, the LEDs on both units will flash blue.
5. To start/end intercom conversation, tap the Ana Düğme her iki ünitede de.

The intercom range is up to 400 meters (approximately 1/4 mile) in open terrain.

7. Bakım ve Özen

• Temizlik: Üniteyi yumuşak, damp bez. Sert kimyasallar veya solventler kullanmayın.
• Depolamak: Cihazı kullanılmadığında serin ve kuru bir yerde saklayın.
• Pil Bakım: To prolong battery life, charge the unit at least once every six months if not used regularly. Avoid extreme temperatures.
• Suya Dayanıklılık: The unit is designed to be water-resistant, but avoid submerging it in water.

8. Sorun Giderme

8.1 Fabrika Ayarlarına Sıfırlama

If the unit is not functioning correctly, a factory reset may resolve the issue. To perform a factory reset:

1. Cihaz açıkken, aşağıdaki tuşa basılı tutun. Ana Düğme 12 saniye boyunca.
2. The LED will flash red rapidly, and you will hear "Factory reset".
3. The unit will power off. Power it on again to use.

Uyarı: A factory reset will delete all Bluetooth pairing information and settings.

9. Özellikler

Not: Özellikler önceden haber verilmeksizin değiştirilebilir.

10. Garanti ve Destek

10.1 Garanti Bilgileri

The Sena 3S Plus Bluetooth System Universal Microphone Kit comes with a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Sena webAyrıntılı garanti şartları ve koşulları için siteyi ziyaret edin.

Garanti talepleri için satın alma belgenizi saklayın.

10.2 Müşteri Desteği

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Sena customer support:

• Webalan: www.sena.com/destek
• E-posta: Refer to the Sena webiletişim için e-posta adresi.
• Telefon: Refer to the Sena website for contact phone numbers.

Before contacting support, please have your product model number (3SPLUS-WB-10) and purchase date available.