EASYGUARD ECS002PP-BM-FM1 Plug Play Remote Starter User Manual

1. Giriş

The EASYGUARD ECS002PP-BM-FM1 is a plug-and-play remote starter system designed for select BMW vehicles equipped with a factory OEM push-start button. This system allows users to remotely start and stop their vehicle using the existing factory key fob, providing convenience for pre-warming or pre-cooling the vehicle.

2. Uyumluluk

This remote starter system is compatible with the following BMW models and years, provided the vehicle has a factory OEM push-start button:

Table showing compatible BMW models and years for the ECS002PP-BM-FM1 remote starter, including Series, Platform, and Jumper Setting.

All listed vehicles must be equipped with a factory OEM push-start button.

3. Paket İçeriği

The EASYGUARD ECS002PP-BM-FM1 kit includes the following components:

Image displaying the various components included in the EASYGUARD ECS002PP-BM-FM1 remote starter kit, including the control module, bypass module, wiring harnesses, and battery boards.

• Kontrol Modülü
• Baypas Modülü
• Bypass Kablosu
• Battery Board (Choose one of two provided)
• Plug Play Wire Harness

4. Important Notes and Safety Information

Key considerations for the EASYGUARD remote starter installation and operation.

• This system is designed for plug-and-play installation.
• No programming of car keys is required.
• The system utilizes your factory OEM key/remote for remote start/stop functions.
• Your vehicle must have a factory OEM Push Start Button.
• A bypass module is included in the kit.
• You must have two working factory keys for installation: one will be placed in the bypass module, and the other will be used for daily operation.

Güvenlik Bilgileri

Keep the entire kit and its components away from children.

5. Kurulum

Installation of this system requires careful attention to detail. If you lack experience with car alarm or electrical installations, it is highly recommended to seek assistance from a trained professional installer.

5.1. Bypass Modülü Kurulumu

The bypass module is crucial for the system to function correctly, as it interacts with the vehicle's chip immobilizer. The bypass module is included in the kit and does not need to be purchased separately.

Step-by-step visual guide for installing the bypass module, focusing on the key sensing area and battery board placement within the factory key.

1. Locate the key sensing area in your vehicle.
2. Carefully open one of your factory key fobs.
3. Slightly raise the contact spring within the key fob to ensure good contact with the battery board.
4. Insert one of the provided battery boards into the key fob.
5. Connect the ribbon cable from the bypass module to the battery board.
6. Secure the key with adhesive tape, wrapping it several times, and ensure the key button side faces up.
7. Place the assembled key fob with the bypass module near the key sensing area in your vehicle.

5.2. Wiring Diagram for FEM Vehicles

A detailed English wiring diagram is available. Please contact us to review it if needed. The diagram below illustrates the connections for FEM vehicles.

Detailed wiring diagram for FEM vehicles, illustrating connections for the remote starter system to various pins and modules.

Note: This wiring diagram is complex. Professional installation is strongly recommended to avoid damage to your vehicle's electrical system.

6. Operasyon

Once installed, the EASYGUARD ECS002PP-BM-FM1 system allows you to remotely control your vehicle using your factory key fob.

Illustration of using the factory key fob to remote start and stop the vehicle, highlighting the 3x lock and 3x trunk button presses.

6.1. Uzaktan Başlatma

Aracınızı uzaktan çalıştırmak için:

• Basın Kilit button on your factory key fob three (3) times consecutively.
• The vehicle's engine will start, and the climate control system will activate based on its last setting.

6.2. Remote Stop

To remotely shut off your vehicle:

• Basın Gövde button on your factory key fob three (3) times consecutively.
• The vehicle's engine will shut off.

6.3. Security Feature

For safety and security, the engine will automatically shut off if a door is opened after a remote start. This is a normal function of the system.

7. Sorun Giderme

If you encounter issues with your EASYGUARD remote starter, please review Aşağıda sık karşılaşılan sorunlar ve çözümleri yer almaktadır:

• System Not Functioning Properly:
  Ensure all wiring connections are secure and correctly installed according to the diagram. Verify that both factory key fobs are working correctly and that one is properly placed within the bypass module as per installation instructions.
• Engine Shuts Off After Remote Start When Door is Opened:
  This is a built-in security feature and is normal operation. It prevents unauthorized driving of the vehicle after a remote start.
• Limited Remote Range:
  The remote start system operates using the range of your existing factory key fob. Obstacles, weather conditions, and battery strength of your key fob can affect the effective range.
• Battery Drain Concerns:
  Ensure that all modules are correctly installed and that the vehicle's computer and monitor completely shut down after the remote stop function is used. Incorrect installation or persistent activity from vehicle systems can lead to battery drain. Consult a professional installer to verify the installation.

Daha fazla yardım için lütfen EASYGUARD müşteri desteğiyle iletişime geçin.

8. Özellikler

• Ürün Model Numarası: ECS002PP-BM-FM1
• Ürün Ağırlığı: 2.86 pound (1.3 kg)
• Ürün Ölçüleri: 7.09 x 5.91 x 2.36 inç (18 x 15 x 6 cm)
• Üretici: ieasyguard.com

9. Garanti ve Destek

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official EASYGUARD webSite. Garanti talepleriniz için satın alma belgenizi saklamanız önerilir.