Wattsaving EV Charger Instruction Manual

1. Giriş

Thank you for choosing the Wattsaving EV Charger. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your electric vehicle charging station. Please read this manual thoroughly before using the product and retain it for future reference.

The Wattsaving EV Charger is designed to provide reliable and fast charging for electric vehicles equipped with a Type 2 charging port. It supports both three-phase (22kW/11kW) and single-phase (7kW/3.5kW) charging, offering versatility for various electrical installations and vehicle requirements.

2. Güvenlik Bilgileri

Your safety and the proper functioning of the charger are paramount. Observe all warnings and precautions listed below.

• Profesyonel Kurulum: Kurulum, tüm yerel ve ulusal elektrik yönetmeliklerine ve kurallarına uygun olarak, yetkili bir elektrikçi tarafından yapılmalıdır.
• Elektrik Tehlikesi: Do not attempt to open, disassemble, repair, or modify the charger. High voltage is present inside, which can cause severe injury or death.
• Su ve Nem: Although the charger has an IP65-rated enclosure, avoid submerging it in water or exposing it to excessive moisture. Ensure hands are dry when handling the charging cable and connector.
• Kablo Bütünlüğü: Regularly inspect the charging cable and connector for any signs of damage, wear, or fraying. Do not use the charger if the cable or connector is damaged.
• Acil durdurma: In case of an emergency, immediately press the emergency stop button on the charger (if available) or disconnect power at the circuit breaker.
• Çocuklar ve Evcil Hayvanlar: Şarj istasyonu çalışırken çocukları ve evcil hayvanları istasyondan uzak tutun.

The Wattsaving EV Charger incorporates multiple safety features, including:

• CE Belgelendirme
• Type A Residual Current Device (RCD)
• Yıldırım Koruması
• aşırı sestage Koruma
• düşük hacimtage Koruma
• Aşırı Akım Koruması
• Aşırı Sıcaklık Koruması
• Acil Durdurma Butonu

3. Ürün Bittiview

Image 1: Wattsaving EV Charger unit with integrated Type 2 charging cable and wall mount.

The Wattsaving EV Charger is a wall-mounted charging station designed for home or private use. It features a robust enclosure and an integrated charging cable.

Temel Bileşenler:

• Şarj Ünitesi: The main housing containing the electronics and control interface.
• Type 2 Charging Cable (5 meters): Permanently attached cable with a Type 2 connector for vehicle connection.
• RFID Kartı: Used for secure activation and deactivation of charging sessions.
• LED Göstergesi: Provides status feedback on charging and operational modes.
• Duvar montajı: Bracket for secure installation of the charger unit.

Özellikler:

• Hızlı Şarj: Up to 22 kW, adding approximately 120 km of range per hour of charging.
• Güvenli Şarj: RFID card activation ensures only authorized users can initiate charging.
• Dayanıklı Muhafaza: IP65-rated for water and dust resistance, suitable for various weather conditions.
• Çok Yönlü Uyumluluk: Type 2 cable is compatible with a wide range of electric vehicles.

4. Özellikler

Image 2: Charger highlighting fast charging capabilities (up to 32 Amp, 400 Volt, 120 km/h at 22kW).

Image 3: Charger illustrating its comprehensive safety features, including CE certification and various protections.

5. Kurulum ve Kurulum

The Wattsaving EV Charger requires professional installation. It is crucial that a qualified and certified electrician performs the installation to ensure compliance with all electrical safety standards and local regulations.

Genel Kurulum Adımları (yetkili personel için):

1. Site Seçimi: Choose a suitable location for the charger, preferably near your parking spot, with access to the main electrical panel. Ensure the surface is sturdy enough to support the charger's weight.
2. Güç Kaynağı: Ensure the electrical circuit can support the charger's power requirements (up to 32A, 400V for 22kW three-phase). A dedicated circuit with appropriate overcurrent protection (circuit breaker) and a Residual Current Device (RCD) is mandatory.
3. Montaj: Securely mount the charger unit to the wall using the provided mounting bracket and hardware. Ensure it is level and at an appropriate height for easy access.
4. Kablolama: Connect the charger to the main electrical supply. Follow the wiring diagram provided with the product packaging. Ensure all connections are tight and correctly insulated.
5. Test: After installation, the electrician must perform thorough testing to verify proper functionality and safety before initial use.

6. Kullanım Talimatları

Operating the Wattsaving EV Charger is straightforward once installed.

Initiating a Charging Session:

1. Araca Bağlan: Open your vehicle's charging port and firmly insert the Type 2 charging connector from the Wattsaving EV Charger into the vehicle's inlet. Ensure it clicks into place.
2. Activate with RFID: Hold your RFID card against the designated RFID reader area on the charger unit. The charger's LED indicator will change, typically to a solid green or blue, indicating that charging has started.
3. Monitör Şarjı: The LED indicator on the charger and your vehicle's dashboard will show the charging status.

Image 4: Demonstrating the use of an RFID card to initiate a secure charging session.

Ending a Charging Session:

1. Deactivate with RFID: Hold your RFID card against the reader again. The charger will stop the charging process.
2. Araçtan Bağlantıyı Kes: Once charging has stopped, unlock the charging cable from your vehicle (if necessary, via your vehicle's controls) and carefully remove the Type 2 connector.
3. Kabloyu Saklayın: Return the charging cable to its designated holder on the wall mount to prevent damage and keep the area tidy.

7. Bakım

Regular maintenance ensures the longevity and safe operation of your Wattsaving EV Charger.

• Temizlik: The charger's IP65-rated enclosure is durable and resistant to water and dust. Clean the exterior with a soft, damp cloth. Do not use abrasive cleaners, solvents, or high-pressure water jets. Ensure the charger is powered off before cleaning.
• Kablo ve Konnektör Kontrolü: Periodically inspect the charging cable and connector for any signs of damage, cracks, discoloration, or excessive wear. If any damage is observed, discontinue use and contact customer support.
• Depolamak: When not in use, ensure the charging cable is neatly coiled and stored on its holder to prevent tripping hazards and damage.

Image 5: The charger's IP65-rated enclosure ensures durability and protection against environmental elements.

8. Sorun Giderme

If you encounter issues with your Wattsaving EV Charger, refer to the following common problems and solutions:

• Şarj Cihazı Çalışmıyor:
  • Ensure the charger is properly connected to the main power supply and the circuit breaker is ON.
  • Verify the charging cable is securely connected to both the charger and the vehicle.
  • Confirm the RFID card is correctly tapped to initiate the session.
  • Check the charger's LED indicator for any error codes or status lights.
• Yavaş Şarj:
  • Ensure your vehicle is capable of accepting the charger's maximum power output.
  • Aracınızın şarj ayarlarını kontrol edin.
  • Verify the electrical installation supports the desired power level (e.g., three-phase supply for 22kW).
• Şarj işlemi beklenmedik bir şekilde durdu:
  • This could indicate a safety protection activation (e.g., overtemperature, overcurrent). Check the charger's LED indicator for fault signals.
  • Gevşek bağlantı olmadığından emin olun.
  • Sorun devam ederse müşteri desteği ile iletişime geçin.
• RFID Card Not Recognized:
  • Ensure the card is placed directly over the RFID reader area.
  • Try another RFID card if available.

For persistent issues or complex problems, please contact Wattsaving technical support.

9. Garanti ve Destek

The Wattsaving EV Charger comes with a 2 yıllık garanti Satın alma tarihinden itibaren, normal kullanım koşullarında malzeme ve işçilik kusurlarını kapsar. Bu garanti, yanlış montaj, yanlış kullanım, yetkisiz değişiklikler veya doğal afetlerden kaynaklanan hasarları kapsamaz.

For warranty claims, technical assistance, or any questions regarding your Wattsaving EV Charger, please contact Wattsaving customer support. Provide your model number (E22-BLACK-V) and proof of purchase when contacting support.

Üretici: SHENZHEN WATTSAVING ELEKTRİK TEKNOLOJİSİ CO.,LTD