Techbee JK-PM04

Techbee Plug-in Electrical Meter Socket Electricity Usage Monitor

Model: JK-PM04

1. Ürün Bittiview

The Techbee Plug-in Electrical Meter Socket is an advanced device designed to help you monitor and manage your electricity consumption. It provides comprehensive data on various electrical parameters, allowing you to identify energy-intensive appliances and optimize your power usage for energy saving and environmental protection.

Techbee Plug-in Electrical Meter Socket Electricity Usage Monitor

Figure 1.1: Techbee Plug-in Electrical Meter Socket Electricity Usage Monitor (Model JK-PM04) with its packaging.

Temel Özellikler:

  • Energy-saving and Environmental Protection: Measures power consumption and calculates total energy costs for rational electricity planning.
  • Çok Fonksiyonlu İzleme: Offers 11 display modes including power (Watt), total energy used (kWh), carbon emissions (CO₂), voltage (Volt), current (Amp), frequency (Hz), power factor, cost per kWh, minimum power, and maximum power.
  • Multi-layer Protection: Features warning indicators (screen flash and LED) for preset power, energy cost, or consumption limits. Default overload limit is 3680W, with a recommendation to set it to 1800W for initial use.
  • User-friendly Display: Large, easy-to-read display set at a 45-degree angle for optimal visibility.
  • Partial Reset Function: Allows deletion of measurement data without affecting original settings (e.g., cost/kWh).
  • Dahili Pil: Retains settings and measured data even when unplugged.

2. Kurulum ve İlk Kullanım

Follow these steps to set up your Techbee Power Meter:

  1. Paketin açılması: Carefully remove the power meter from its packaging.
  2. Koruyucu Film: A transparent protective film is present on the screen. You may remove it for clearer visibility or keep it as preferred.
  3. Güç Açık: Plug the meter directly into a standard electrical wall socket. The display should illuminate. If the screen remains blank or buttons are unresponsive, plugging it into a live socket will resolve the issue as it powers the internal battery and display.
  4. Initial Overload Setting: The default overload power limit is 3680W. Before using the energy meter, it is recommended to set the overload power to 1800W for general household appliances. Refer to Section 3.2 for instructions on setting alarm thresholds.
  5. Cihazı Bağlayın: Plug the appliance you wish to monitor into the socket on the front of the power meter.
User-friendly design of the Techbee Power Meter with large display and built-in battery

Figure 2.1: The meter features a large display and a built-in battery for convenience.

3. Kullanım Talimatları

The Techbee Power Meter features four control buttons: MOD, AYARLAMAK, UP, Ve AŞAĞI.

3.1. Ekran Modları

Basın MOD button to cycle through the 11 different display modes. Each mode provides specific electrical data:

  1. Watt / Total Cost: Displays current power consumption in Watts and accumulated cost.
  2. Total kWh Used: Shows the total kilowatt-hours consumed.
  3. Carbon Emissions (CO₂): Displays CO₂ emissions based on energy consumption.
  4. Cilttage / Frekans: Mevcut hacmi gösterirtage (V) and frequency (Hz) of the power supply.
  5. Current / Power Factor: Displays the current (Amp) and power factor.
  6. Cost per kWh: Ayarların yapılmasına olanak tanır ve viewing the cost per kilowatt-hour.
  7. Minimum Güç: Shows the lowest recorded power consumption.
  8. Maksimum Güç: Shows the highest recorded power consumption.
  9. Aşırı Yük Alarmı: Displays the set overload power limit.
  10. Alarm of kWh: Displays the set kWh alarm limit.
  11. Alarm of Cost: Displays the set cost alarm limit.
Diagram showing 11 different display modes of the electricity usage monitor

Şekil 3.1: Üzeriview of the 11 monitoring modes available on the device.

3.2. Setting Alarm Thresholds and Cost

To set specific values like cost per kWh or alarm limits:

  1. Basın MOD button until you reach the desired setting mode (e.g., "Cost per kWh", "Overload Alarm", "Alarm of kWh", or "Alarm of Cost").
  2. Basın AYARLAMAK button. The digit you can adjust will start flashing.
  3. Kullanın UP Ve AŞAĞI değeri ayarlamak için düğmeler.
  4. Basmak AYARLAMAK again to move to the next digit or to confirm the setting.
  5. Once all digits are set, press MOD Ayar modundan çıkmak için.
Visual representation of flashing LED and screen alarms for overload, kWh, and cost

Figure 3.2: The device provides visual alarms (flashing LED and screen indicators) when set thresholds are exceeded.

3.3. Resetting Data

The meter allows for partial data reset, which means you can clear accumulated measurement data (like total kWh or total cost) without losing your custom settings (like cost per kWh or alarm thresholds). To reset measurement data, press and hold the AŞAĞI button for approximately 5 seconds until the relevant data clears.

3.4. Monitoring Appliance Consumption

The meter can precisely detect power usage down to 0.5W, allowing you to identify even the tiniest standby power consumption from your devices. This helps in tracking and reducing unnecessary electricity usage across various household appliances.

Collage of household appliances like TV, washing machine, dishwasher, refrigerator, computer, and heater, with the power meter in the center, illustrating its use for tracking consumption.

Figure 3.3: The power meter can be used to track consumption of various household appliances.

4. Bakım

To ensure the longevity and accurate performance of your Techbee Power Meter, follow these maintenance guidelines:

  • Temizlik: Cihazı yumuşak, kuru bir bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın, çünkü bunlar ekrana veya diğer bileşenlere zarar verebilir.asing.
  • Depolamak: Ölçüm cihazını serin, kuru ve doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak bir yerde saklayın.
  • Pil: The meter includes a built-in Lithium Metal battery. This battery is not user-replaceable and is designed to retain settings and data when the device is unplugged.
  • Nemden Kaçının: Do not expose the device to water or high humidity. It is designed for indoor use only.

5. Sorun Giderme

If you encounter any issues with your Techbee Power Meter, refer to the following common problems and solutions:

SorunOlası NedenÇözüm
Screen is blank or buttons are unresponsive.Meter is not receiving power or internal battery needs charging.Plug the meter into a live electrical socket. This will power the unit and charge the internal battery.
Ekranın okunması zor.Lack of backlight in low-light conditions.Use a flashlight to illuminate the screen for better visibility. Ensure adequate ambient lighting.
Overload alarm activates frequently.Connected appliance exceeds the set overload limit.Reduce the load on the circuit or adjust the overload limit if appropriate (refer to Section 3.2). Ensure the total wattage does not exceed the meter's maximum capacity (15A).
Data not resetting correctly.Incorrect reset procedure.Düğmeye basılı tuttuğunuzdan emin olun. AŞAĞI button for approximately 5 seconds to perform a partial reset.

6. Özellikler

ÖzellikŞartname
Model NumarasıJK-PM04
Ürün Ağırlığı5.9 ons
Paket Boyutları6.73 x 3.23 x 2.52 inç
Güç KaynağıKablolu Elektrik
Ölçüm Doğruluğu±%2
Dahil BileşenlerWattmetre
Pil Türü1 Lityum Metal pil (dahil)
ÜreticiShen Zhen He Yi Ke Ji You Xian Gong Si
İlk Mevcut Tarih16 Temmuz 2023

7. Garanti ve Destek

Techbee stands behind the quality of its products. This product comes with a 1 yıllık garanti satın alma tarihinden itibaren.

For any questions, technical assistance, or warranty claims, please contact Techbee customer service. We offer lifetime customer service to ensure your satisfaction with our products.

You can find more information and support resources by visiting the official Techbee store: Techbee Store on Amazon.

© 2024 Techbee. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.