Deal4GO BX260 LCD eDP Cable Instruction Manual

1. Giriş

This manual provides essential information for the installation and use of the Deal4GO BX260 30-pin LCD eDP Cable. This cable is designed as a replacement part for specific Lenovo ThinkPad models, facilitating the connection between the motherboard and the display panel. Please read these instructions carefully before proceeding with any installation.

2. Ürün Bittiview

The BX260 LCD eDP Cable is a 30-pin display cable specifically engineered for non-touchscreen HD (1366 x 768) resolution LCD panels. It ensures proper video signal transmission within compatible laptop models.

Resim 1: Üzeriview of the Deal4GO BX260 30-pin LCD eDP Cable. This image shows the full length of the cable with both connectors visible, highlighting its design for internal laptop display connections.

3. Uyumluluk

This cable is compatible with the following Lenovo ThinkPad models and display specifications:

• Compatible Laptop Models:
  • ThinkPad X240 (Type: 20AM)
  • ThinkPad X250 (Type: 20CM)
  • ThinkPad X260 (Type: 20F6)
  • ThinkPad X270 (Type: 20K5)
• Screen / Interface Type: 30-pin, specifically for NON-TouchScreen LCDs with HD (1366 x 768) resolution.

Important: This cable is NOT compatible with touchscreen displays or displays with resolutions other than HD (1366 x 768). It is also NOT compatible with other laptop models not listed above.

4. Parça Numaraları

To ensure correct replacement, verify that the part number of your existing cable matches one of the following:

• DC02C007420
• DC02C007410
• DC02C007400
• SC10K41899
• SC10K41000
• SC10K41897
• BX260 EDP CABLE
• FRU: 01AW438

Resim 2: Yakın çekim view of one end of the BX260 LCD eDP Cable, showing the connector and a label with identifying information, including part numbers. This detail is crucial for verifying compatibility.

5. Paket İçeriği

Her paket şunları içerir:

• 1x BX260 LCD eDP Cable (30-pin)

6. Kurulum ve Kurulum

Warning: Laptop disassembly and component replacement require technical expertise. Incorrect installation can damage your device. If you are not comfortable performing this procedure, it is highly recommended to seek assistance from a qualified technician.

1. Hazırlık:
   • Power off your laptop completely and disconnect it from all power sources.
   • Remove the battery to prevent accidental power-on.
   • Use an anti-static wrist strap or work on an anti-static mat to prevent electrostatic discharge (ESD) damage to components.
2. Sökme:
   • Carefully disassemble your laptop to access the existing LCD cable. This typically involves removing the bottom cover, keyboard, palm rest, and potentially the display bezel. Refer to your specific laptop model's service manual for detailed disassembly instructions.
   • Locate the existing LCD cable connections on both the motherboard and the LCD panel.
3. Kablonun Çıkarılması:
   • Gently disconnect the old LCD cable from the motherboard and the LCD panel. Be cautious not to damage the connectors or surrounding components.
   • Note the routing of the old cable to ensure the new cable is installed correctly.
4. New Cable Installation:
   • Carefully connect the new BX260 LCD eDP Cable to the motherboard and the LCD panel. Ensure the connectors are fully seated and secured.
   • Route the new cable precisely as the old one was routed, avoiding pinching or sharp bends that could damage the cable.
5. Yeniden Montaj ve Test:
   • Before fully reassembling the laptop, connect the battery and power adapter.
   • Power on the laptop to test the display functionality. Verify that the screen powers on and displays correctly.
   • If the display works, power off the laptop, disconnect power and battery, and complete the reassembly process.

7. Kullanım Talimatları

The BX260 LCD eDP Cable is a passive component responsible for transmitting video signals. Once correctly installed, it operates automatically as part of your laptop's display system. No user interaction or configuration is required for the cable itself.

8. Bakım

This cable requires minimal maintenance. To ensure its longevity and proper function:

• Avoid physical stress: Do not bend, twist, or pull the cable excessively during installation or handling.
• Keep connections clean: Ensure connectors are free from dust or debris before installation.
• Protect from liquids: Prevent any liquid contact with the cable or its connectors.

9. Sorun Giderme

If you encounter issues after installing the new LCD cable, consider the following troubleshooting steps:

• Görüntü Yok / Siyah Ekran:
  • Ensure both ends of the cable are securely connected to the motherboard and the LCD panel.
  • Verify that the cable is not pinched or damaged during reassembly.
  • Confirm that the new cable's part number matches your original cable and that your display is a compatible non-touch HD (1366x768) panel.
  • Test with an external monitor to rule out issues with the graphics card or other internal components.
• Flickering / Intermittent Display:
  • Check for loose connections at both ends of the cable.
  • Kabloda gözle görülür bir hasar veya bükülme olup olmadığını kontrol edin.
  • Ensure the cable is properly routed and not being stressed by other components.
• Incorrect Colors / Distorted Image:
  • Verify that the cable is fully seated and not partially connected.
  • Ensure the correct display drivers are installed for your laptop model.

If problems persist after these steps, it may indicate an issue with another component (e.g., LCD panel, motherboard) or require professional diagnosis.

10. Özellikler

11. Garanti ve Destek

For information regarding warranty coverage, returns, or technical support, please refer to the seller's policies on the platform where the product was purchased. It is recommended to retain your proof of purchase for any warranty claims.