SIMON 10 Series 230V Wall Switch and Commutator Instruction Manual

1. Ürün Bittiview

The SIMON 10 Series white switch/commutator is an electrical control device designed for interior use. It can function as a standard ON/OFF switch or as a two-way commutator, allowing control of a single light point from two different locations. This product is supplied as a pre-assembled unit, including the mechanism, cover, and frame, to facilitate installation. Its robust design features screw-fastened components and a metallic frame for enhanced durability and secure mounting. The minimalist design with straight lines ensures seamless integration into various interior aesthetics.

Şekil 1: Ön view of the SIMON 10 Series white wall switch and commutator.

2. Kutuda Neler Var?

The SIMON 10 Series switch/commutator package includes the following components:

• Mekanizma
• Kapak
• Çerçeve

3. Özellikler

4. Güvenlik Bilgileri

WARNING: Electrical installation should only be performed by qualified personnel. Failure to follow these instructions can result in electric shock, fire, or serious injury.

• Herhangi bir kurulum, bakım veya onarım işlemine başlamadan önce daima ana devre kesiciden veya sigorta kutusundan elektriği kesin.
• Vol kullanarak gücün kapalı olduğunu doğrulayıntagHerhangi bir kabloya dokunmadan önce test cihazını kullanın.
• Follow all local and national electrical codes and regulations.
• Do not install or operate with wet hands or in damp koşullar.
• Gerektiği yerlerde uygun topraklamanın sağlandığından emin olun.
• Belirtilen hacmi aşmayıntage (230V) or current rating (10A).

5. Kurulum ve Kurulum

The SIMON 10 Series switch/commutator is designed for straightforward installation. Please ensure you have read and understood the safety information before proceeding.

1. Gücü Kesin: Turn off the power supply to the circuit at the main circuit breaker or fuse box. Confirm power is off with a voltage test cihazı.
2. Kablolamayı Hazırlayın: Carefully remove the existing switch or cover plate. Identify the live, neutral, and ground wires (if applicable) according to local wiring standards. For a commutator, identify the common wire and the two traveler wires.
3. Kabloları Bağlayın: Using a screwdriver, connect the electrical wires to the screw terminals on the back of the SIMON 10 Series mechanism. Ensure all connections are secure and no bare wire strands are exposed. Refer to the wiring diagram below for typical connections.


Şekil 2: Geri view of the switch mechanism with screw terminals for wiring.

4. Montaj Mekanizması: Gently push the wired mechanism into the wall box. Use the metallic claws and mounting screws to secure the mechanism firmly to the wall box. The metallic claws provide better adhesion.

Şekil 3: Patlatılmış view showing mechanism, frame, and cover assembly.
5. Attach Frame and Cover: Position the polypropylene frame over the mounted mechanism. The flexible nature of the frame aids in easier installation. Snap the cover plate onto the frame until it is securely in place.
6. Gücü Geri Yükle: Once installation is complete and all components are securely fastened, restore power to the circuit from the main circuit breaker.
7. Test İşlevselliği: Test the switch/commutator to ensure it operates correctly.

6. Kullanım Talimatları

The SIMON 10 Series switch/commutator is operated by pressing the rocker switch.

• As a Standard Switch: When wired as a single-pole switch, pressing the top or bottom of the rocker will toggle the connected light or device ON or OFF.
• As a Commutator (Two-Way Switch): When wired in a two-way configuration, pressing the rocker will alternate the circuit connection, allowing you to control a single light fixture from two separate locations. For example, one switch at the bottom of a staircase and another at the top.

7. Bakım

The SIMON 10 Series switch/commutator requires minimal maintenance.

• Temizlik: To clean the surface of the switch, ensure power is disconnected at the circuit breaker. Use a soft, dry, or slightly damp Aşındırıcı temizleyiciler, çözücüler veya sert kimyasallar kullanmayın, çünkü bunlar cilaya zarar verebilir.
• Denetleme: Anahtarda herhangi bir hasar, gevşek bağlantı veya renk değişimi belirtisi olup olmadığını periyodik olarak kontrol edin. Herhangi bir sorun gözlemlenirse, gücü kesin ve yetkili bir elektrikçiye danışın.

8. Sorun Giderme

If you encounter issues with your SIMON 10 Series switch/commutator, refer to the following common troubleshooting steps:

9. Garanti ve Destek

For information regarding warranty coverage, technical support, or spare parts availability, please contact Simon customer service directly or visit the official Simon webSite. Satın alma belgeniz olarak satın alma fişinizi saklayın.

Simon Official Webalan: www.simon.es (Lütfen aklınızda bulundurun: URL eski sevgiliample, verify the correct regional web(Destek sitesi.)