Yaheetech YA-00119773

Yaheetech Faux Leather Armchair Instruction Manual

Model: YA-00119773

giriiş

Thank you for choosing the Yaheetech Faux Leather Armchair. This manual provides essential information for the safe and correct assembly, use, and maintenance of your new armchair. Please read these instructions carefully before assembly and retain them for future reference.

Yaheetech Faux Leather Armchair with dimensions

Resim: Ön ve yan view of the Yaheetech Faux Leather Armchair, showing overall dimensions and weight capacity of 136 kg.

Güvenlik Bilgileri

  • Montajdan önce tüm parçaların eksiksiz ve hasarsız olduğundan emin olun. Eksik veya kırık parçalar varsa kullanmayın.
  • Assemble the armchair on a soft, clean surface to prevent scratches.
  • Montaj sırasında vidaları aşırı sıkmayın, çünkü bu malzemeye zarar verebilir.
  • Boğulma tehlikesini önlemek için küçük parçaları ve ambalaj malzemelerini çocuklardan ve evcil hayvanlardan uzak tutun.
  • Koltuğun üzerine çıkmayın veya onu basamak olarak kullanmayın.
  • The maximum weight capacity for this armchair is 136 kg. Do not exceed this limit.
  • Tüm bağlantı elemanlarının sıkılığını düzenli olarak kontrol edin.

Paket İçeriği

Lütfen paketinizde aşağıdaki bileşenlerin tamamının bulunduğunu doğrulayın:

  • 1 x Armchair Body (Seat, Backrest, Armrests combined)
  • 4 x Tapered Legs
  • 1 x Hardware Pack (Screws, Washers, Allen Key)

Kurulum ve Montaj

Assembly of your Yaheetech armchair is straightforward and typically requires minimal time.

  1. Bileşenleri Paketinden Çıkarın: Carefully remove all parts from the packaging. Place them on a soft, clean surface to avoid damage.
  2. Identify Leg Attachment Points: Turn the armchair body upside down. Locate the pre-drilled holes and mounting plates for the legs on the underside of the chair.
  3. Bacakları Takın: Align each tapered leg with its corresponding mounting plate. Insert the screws from the hardware pack through the holes in the plate and into the legs. Hand-tighten all screws initially.
  4. Güvenli Bacaklar: Once all legs are in place, use the provided Allen key to fully tighten all screws. Ensure the legs are securely fastened but do not overtighten.
  5. Position Armchair: Carefully turn the armchair upright and place it in your desired location. Ensure it is stable and does not wobble.
Armchair leg structure for assembly

Image: Detail of the armchair's leg structure, illustrating how the tapered legs attach to the main body.

İşletme ve Kullanım

Your Yaheetech Faux Leather Armchair is designed for comfortable seating in various indoor environments.

  • Use the armchair for sitting purposes only.
  • Place the armchair on a flat, stable surface to prevent tipping.
  • Avoid placing the armchair in direct sunlight or near heat sources to prevent material degradation.
  • The armchair is suitable for living rooms, bedrooms, offices, or reception areas.
Yaheetech Faux Leather Armchair in a living room setting

Image: The armchair positioned in a modern living room with a bookshelf and window, demonstrating typical usage.

Bakım

Doğru bakım, koltuğunuzun ömrünü ve görünümünü uzatacaktır.

  • Düzenli Temizlik: Dust the faux leather surface regularly with a soft, dry cloth.
  • Nokta Temizleme: For spills, immediately blot with a clean, dry cloth. For stubborn stains, use a mild soap solution and a damp cloth, then wipe dry. Avoid abrasive cleaners or harsh chemicals.
  • Keskin Nesnelerden Kaçının: Keep sharp objects away from the faux leather to prevent punctures or tears.
  • Güneş Işığına Maruz Kalma: Prolonged exposure to direct sunlight can cause the faux leather to fade or crack. Position the armchair away from direct sun or use curtains/blinds.
  • Yapısal Kontrol: Periodically inspect the legs and frame for any looseness. Tighten screws as needed.
Close-up of the armchair's tufted backrest

Resim: Ayrıntılı view of the armchair's tufted backrest, highlighting the faux leather material and button detailing.

Sorun giderme

SorunOlası NedenÇözüm
Armchair wobblesLoose leg screws or uneven floor.Tighten all leg screws. Move the armchair to a flat surface or use furniture pads to level.
gıcırtı sesiÇerçeve veya bacaklardaki gevşek bağlantılar.Tüm montaj vidalarını kontrol edip sıkın.
Faux leather appears dull or stainedBiriken toz veya dökülmeler.Yumuşak bir bezle temizleyin.amp cloth and mild soap solution, then wipe dry. Avoid harsh chemicals.

Özellikler

ÖzellikDetay
MarkaYaheetech
ÖrnekYA-00119773
RenkKahverengi
MalzemeFaux Leather, Plywood (E1 class), Metal (legs), Sponge (filling), Pocket Springs
Genel Boyutlar (U x G x Y)73 x 72.5 x 93 cm (28.7 x 28.5 x 36.6 inç)
Koltuk Boyutları (G x D)48.5 x 52 cm (19.1 x 20.5 inç)
Oturma Yüksekliği45 cm (17.7 inç)
Kolçak Yüksekliği62 cm (24.4 inç)
Backrest Depth53.5 cm (21.1 inç)
Maksimum Ağırlık Kapasitesi136 kg (300 lbs)
Ürün Ağırlığı15 kg (33 lbs)
Kesit view of the armchair seat showing internal pocket springs

Resim: Bir kesit view of the armchair's seat cushion, revealing the internal pocket spring construction for enhanced comfort and durability.

Garanti ve Destek

Yaheetech products are manufactured with quality and customer satisfaction in mind. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Yaheetech webalan.

If you encounter any issues or have questions regarding your armchair, please contact Yaheetech customer support:

  • Çevrimiçi destek: Ziyaret edin Yaheetech Mağazası Amazon'da İletişim bilgileri ve sıkça sorulan sorular için.
  • E-posta/Telefon: Refer to your product packaging or the Yaheetech webEn güncel iletişim bilgileri için sitemizi ziyaret edin.

© 2024 Yaheetech. Tüm hakları saklıdır.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.