LOKITHOR J3250 PRO Atlama Başlatıcı Kullanım Kılavuzu

1. Giriş

The LOKITHOR J3250 PRO is a powerful and versatile LiFePO4 jump starter designed to provide reliable starting power for vehicles with up to 9.5L gasoline and 7.5L diesel engines. It also functions as a portable power bank and features an integrated LED flashlight. This manual provides essential information for safe and effective use, setup, operation, maintenance, and troubleshooting of your device.

2. Güvenlik Bilgileri

Please read and understand all safety instructions before operating the LOKITHOR J3250 PRO. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Göz Koruması: Always wear safety glasses when working with batteries.
• Havalandırma: Cihazı iyi havalandırılan bir alanda kullanın.
• Çocuklar: Cihazı çocukların erişemeyeceği yerde saklayınız.
• Kısa Devreler: kırmızı ve siyah cl izin vermeyinampBirbirlerine veya aynı metal nesneye dokunmak.
• Ters kutup: Ensure correct polarity connection (red to positive, black to negative) to avoid damage. The device includes reverse-polarity protection.
• Nem: Do not immerse the device in water. While it has an IP65 rating for water and dust resistance, it is not designed for submersion.
• Zarar: Cihaz hasarlıysa kullanmayın. Yardım için müşteri desteğiyle iletişime geçin.
• Sıcaklık: Do not expose the device to extreme heat or fire. Store within recommended temperature ranges.

The LOKITHOR J3250 PRO incorporates 10 safety protection technologies, including spark-proof, reverse-polarity, short-circuit, reverse-charge, low-temperature, high-temperature, over-voltage, over-load, over-charge, and over-current protection.

3. Ürün Bittiview

3.1 Kutuda Neler Var?

• LOKITHOR J3250 PRO Jump Starter Unit
• Jumper Starter Clamps
• USB-A - USB-C Kablosu
• USB-C'den USB-C'ye Kablo
• 12V Adaptörü
• Aksesuar Saklama Çantası
• Kullanıcı Kılavuzu

Included components with the LOKITHOR J3250 PRO Jump Starter.

3.2 Temel Özellikler

• High Starting Current: 3250 sunar Amp peak current for reliable vehicle starting.
• Motor Uyumluluğu: Suitable for gasoline engines up to 9.5 liters and diesel engines up to 7.5 liters.
• LiFePO4 Pil Teknolojisi: Offers over 2000 cycles at 100% depth of discharge, providing extended lifespan and enhanced chemical stability compared to traditional lead-acid or lithium-ion batteries.
• Gelişmiş Güvenlik: Features 10 types of protection, including spark-proof, mistake-proof, and reverse-polarity protection.
• 100W Çift Yönlü Hızlı Şarj: Recharges the unit in approximately 60 minutes and can provide power output for USB-C devices.
• ConnectMax Technology: Automatically detects clamp connection impedance to optimize starting efficiency.
• Taşınabilir Güç Bankası: Provides 74.24Wh capacity with USB-A and USB-C outputs for charging phones, tablets, laptops, and other devices.
• 400-Lumen LED Flashlight: Includes multiple modes (constant, strobe, SOS) for emergency lighting.
• Dayanıklı Tasarım: IP65 waterproof and dustproof rating, designed to operate in temperatures from -4°F to 140°F (-20°C to 60°C).
• Uzun bekleme süresi: Maintains charge for up to 42 months (1260 days) with minimal self-discharge.

The J3250 PRO provides 3250A peak current, suitable for large engines.

The device features an IP65 rating for water and dust resistance.

4. Kurulum ve Şarj

4.1 İlk Şarj

Before first use, fully charge the LOKITHOR J3250 PRO. This ensures optimal performance and extends battery life.

1. Connect the provided USB-C to USB-C cable to the jump starter's USB-C input port.
2. Connect the other end of the USB-C cable to a 100W Power Delivery (PD) compatible wall charger (not included) or use the included 12V adapter.
3. The display will show charging progress. A full charge typically takes about 60 minutes with a 100W PD charger.

4.2 Recharging the Device

It is recommended to recharge the jump starter after each use. If not used regularly, recharge the unit every 3-6 months to maintain battery health and readiness.

5. Kullanım Talimatları

5.1 Jump Starting a Vehicle (Normal Mode)

Use Normal Mode for vehicles with a partially discharged battery.

1. Cl'yi ekleamps: Kırmızı (+) cl'yi bağlayınamp to the positive terminal of the vehicle battery. Connect the black (-) clamp araç aküsünün negatif terminaline.
2. Güç Açık: Turn on the LOKITHOR J3250 PRO. The device will automatically detect the battery and prepare for jump starting.
3. Aracı Başlat: Aracınızı çalıştırın.
4. Power Off & Detach: Once the vehicle starts, power off the jump starter and immediately disconnect the clamparaç aküsünden.

Steps for jump starting a vehicle using Normal Mode.

5.2 Jump Starting a Vehicle (Boost Mode)

Use Boost Mode for completely dead batteries where Normal Mode does not initiate a jump start.

1. Kırmızı Cl'yi takınamp: Kırmızı (+) cl'yi bağlayınamp araç aküsünün artı kutbuna.
2. Activate Boost: Long press the 'Boost' button on the jump starter for more than 5 seconds. The display will indicate Boost Mode is active.
3. Siyah Cl'yi takınamp: Siyah (-) cl'yi bağlayınamp araç aküsünün negatif terminaline.
4. Aracı Başlat: Start your vehicle within 30 seconds of activating Boost Mode.
5. Power Off & Detach: Once the vehicle starts, power off the jump starter and immediately disconnect the clamparaç aküsünden.

Steps for jump starting a vehicle using Boost Mode for completely dead batteries.

5.3 Taşınabilir Güç Bankası Olarak Kullanımı

The J3250 PRO can charge various electronic devices.

• Connect your device to the USB-A output port (12V/1.5A, 18W QC) or the USB-C output port (20V/5A, 100W PD).
• The device will automatically begin charging.

The J3250 PRO can charge multiple electronic devices.

5.4 LED El Fenerinin Kullanımı

The integrated 400-lumen LED flashlight provides illumination and emergency signaling.

• Press the flashlight button once for constant illumination.
• Strobe ve SOS modları arasında geçiş yapmak için tekrar basın.
• El fenerini kapatmak için dördüncü kez basın.

The 400-lumen LED flashlight offers multiple modes for various situations.

6. Bakım

• Düzenli Olarak Şarj Edin: To prolong battery life, recharge the unit after each use. If stored, recharge every 3-6 months.
• Depolamak: Store the jump starter in a cool, dry place, away from direct sunlight and moisture. The device has a standby time of up to 42 months when fully charged.
• Temizlik: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Clamp Bakım: cl'yi sağlayınamps are clean and free of corrosion for optimal connection.

The J3250 PRO maintains charge for up to 42 months in standby.

7. Sorun Giderme

If you encounter issues with your LOKITHOR J3250 PRO, refer to the following common troubleshooting steps:

• Cihaz Açılmıyor: Ensure the device is charged. If the battery is completely depleted, charge it for at least 15-30 minutes before attempting to power on.
• Vehicle Not Starting (Normal Mode):
  • Cl'nin kontrol edildiğini kontrol edinamps doğru akü terminallerine (kırmızı pozitife, siyah negatife) güvenli bir şekilde bağlanmıştır.
  • Ensure the vehicle battery terminals are clean and free of corrosion.
  • If the vehicle battery is completely dead, try using Güçlendirme Modu.
• Vehicle Not Starting (Boost Mode): Ensure the Boost Mode was activated correctly (long press for 5 seconds) and the vehicle was started within 30 seconds.
• Clamps Sparking: This is normal if the clamps are connected incorrectly or if there is a poor connection. Ensure proper connection and clean terminals. The device has spark-proof protection.
• Cihazın Aşırı Isınması: The device has high-temperature protection. If it feels excessively hot, disconnect it and allow it to cool down before further use.
• Şarj Sorunları: Ensure the charging cable and adapter are functioning correctly and are compatible with 100W PD for fast charging.

If problems persist, please contact LOKITHOR customer support.

8. Özellikler

The J3250 PRO is designed to operate in a wide range of temperatures.

9. Garanti ve Destek

LOKITHOR products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official LOKITHOR webSitelerini ziyaret edin veya doğrudan müşteri hizmetleri departmanıyla iletişime geçin. Garanti talepleri için satın alma belgesi olarak satın alma fişinizi saklayın.

If you have any after-sales questions, please feel free to contact us.