Fireangel AE6620-FRR Optical Smoke Detector User Manual

giriiş

Thank you for choosing the Fireangel AE6620-FRR Optical Smoke Detector. This device is designed to provide early warning of fire by detecting smoke particles. Featuring an advanced optical sensor and a sealed 10-year lithium battery, it offers reliable, long-term protection without the need for battery replacement. This manual provides essential information for proper installation, operation, and maintenance to ensure your safety.

Şekil 1: Fireangel AE6620-FRR Optical Smoke Detector. This image shows the top view of the smoke detector, highlighting its compact design and the NF certification logo, indicating compliance with safety standards.

Önemli Güvenlik Bilgileri

• Bu duman dedektörü yalnızca iç mekan kullanımı için tasarlanmıştır.
• Duman dedektörünü boyamayın. Boya, algılama haznelerini tıkayarak cihazın doğru çalışmasını engelleyebilir.
• Avoid placing the detector near bathrooms or kitchens, as steam and cooking fumes can trigger nuisance alarms.
• Regularly test your smoke detector as described in the Operating section to ensure it is functioning correctly.
• Duman alarmını asla göz ardı etmeyin. Sebebini hemen araştırın.
• The sealed battery is designed to last 10 years. Do not attempt to replace the battery. The entire unit must be replaced after 10 years or if a low battery signal persists.

Kurulum ve Yükleme

The Fireangel AE6620-FRR smoke detector is designed for quick and easy installation on either a wall or ceiling. No complex wiring or maintenance is required.

Konum Seçmek:

• Install smoke detectors in all sleeping areas and on every level of your home.
• For optimal detection, place the detector in the center of the ceiling. If ceiling mounting is not possible, mount it on a wall, at least 10-30 cm (4-12 inches) from the ceiling.
• Keep detectors away from air vents, fans, and areas with high humidity or extreme temperatures.
• Avoid placing within 1 meter (3 feet) of cooking appliances or bathrooms to prevent nuisance alarms.

Montaj Talimatları:

1. Carefully remove the mounting bracket from the back of the smoke detector by twisting it counter-clockwise.
2. Position the mounting bracket on your chosen ceiling or wall location. Mark the positions for the screw holes.
3. Drill pilot holes at the marked positions. Insert wall plugs if necessary.
4. Verilen vidaları kullanarak montaj braketini sabitleyin.
5. Align the smoke detector with the mounting bracket and twist it clockwise until it clicks securely into place.
6. Perform an initial test as described in the "Operating the Detector" section to confirm proper installation.

Şekil 2: Taraf view of the Fireangel AE6620-FRR smoke detector. This image illustrates the detector's profile and ventilation slots, important for proper smoke entry and detection.

Dedektörün Çalıştırılması

Dedektörün Test Edilmesi:

It is crucial to test your smoke detector regularly, at least once a month, to ensure it is functioning correctly.

1. Press and hold the large "TEST/X" button located on the center of the detector.
2. A loud alarm sound (approximately 85 dB at 3 meters) will confirm that the unit is working.
3. Düğmeyi bırakın. Alarm duracaktır.

Silence Function (Nuisance Alarm):

In case of a false alarm (e.g., from cooking fumes), you can temporarily silence the alarm.

• Press the "TEST/X" button once.
• The alarm will be silenced for approximately 10 minutes. The red LED indicator may continue to flash.
• Ensure the source of the nuisance alarm is cleared. The detector will automatically reset after the silence period.

Sleep Easy™ Function (Low Battery Warning):

If a low battery warning sounds during the night, the Sleep Easy™ function allows you to temporarily silence the low battery chirp for 8 hours.

• Press the "TEST/X" button once when the low battery chirp occurs.
• The chirp will be silenced for 8 hours. The red LED will continue to flash to indicate a low battery.
• The detector remains active and will still detect smoke during this period.
• Önemli: The Sleep Easy™ function is a temporary measure. The unit must be replaced within 30 days of the first low battery warning, as the sealed battery is nearing the end of its 10-year life.

Şekil 3: Tepe view of the Fireangel AE6620-FRR smoke detector. This image clearly shows the central "TEST/X" button, used for testing the alarm and silencing nuisance or low battery alerts.

Bakım

Pil Ömrü:

The Fireangel AE6620-FRR is equipped with a sealed lithium battery designed to last for 10 years. This means no battery replacement is needed throughout the detector's operational life. When the battery reaches the end of its life, the unit will emit a low battery chirp.

• Hayatın sonu: After 10 years from activation, or when the low battery warning begins, the entire smoke detector unit must be replaced.
• Do Not Attempt to Replace Battery: The battery is sealed and not user-replaceable. Tampering with the unit may void the warranty and compromise safety.

Cleaning Your Detector:

Dust and debris can accumulate on the smoke detector, potentially affecting its performance.

• Clean your smoke detector at least once a month.
• Use a soft brush attachment on your vacuum cleaner to gently remove dust from the vents and around the casing.
• Do not use cleaning solvents or sprays on the detector.

Sorun giderme

Özellikler

Garanti ve Destek

Garanti:

The Fireangel AE6620-FRR Smoke Detector comes with a 10 yıllık garanti, covering defects in materials and workmanship under normal use. This warranty period aligns with the expected lifespan of the sealed battery. Please retain your proof of purchase for warranty claims.

Müşteri Desteği:

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Fireangel customer support. Refer to the product packaging or the official Fireangel webEn güncel iletişim bilgileri için sitemizi ziyaret edin.