giriiş
Thank you for choosing the Jambo 16-inch Liquid Motion Lamp. This manual provides essential information for the safe and proper use, setup, operation, and maintenance of your lampLütfen kullanmadan önce dikkatlice okuyun ve ileride başvurmak üzere saklayın.
The Jambo Liquid Motion Lamp creates a mesmerizing visual display as heated wax slowly rises and falls within a liquid-filled glass vessel. This dynamic effect provides a calming and decorative ambiance for any indoor space.
Güvenlik Bilgileri
Güvenli çalışmayı sağlamak ve hasarı önlemek için lütfen aşağıdaki güvenlik önlemlerine uyun:
- Sadece İç Mekanda Kullanım: Bu benamp is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
- Elektriksel Güvenlik: l'yi sağlayınamp is connected to a 120-volt power outlet. Do not overload electrical outlets.
- Isı Uyarısı: Lamp and its contents become hot during operation. Do not touch the glass or base while the lamp is on or immediately after turning it off. Allow sufficient time for cooling.
- Sabit Yerleştirme: l'yi yerleştirinamp on a flat, stable, and heat-resistant surface away from edges where it could be easily knocked over.
- Avoid Shaking: Do not shake, drop, or move the lamp while it is operating or hot, as this can damage the internal components and cause the liquid to become cloudy.
- Çocuklardan ve Evcil Hayvanlardan Uzak Tutun: Due to the heat generated, keep the lamp çocukların ve evcil hayvanların erişemeyeceği yerlerde.
- Havalandırma: Ensure adequate air circulation around the lamp to prevent overheating. Do not cover the lamp.
- Hasarlı Kablo: Güç kablosu hasarlıysa tehlikeleri önlemek için üretici veya yetkili servis tarafından değiştirilmelidir.
Paket İçeriği
Paketi açtığınızda tüm bileşenlerin mevcut olduğundan emin olun:
- 1 x Jambo Liquid Motion Lamp Unit (Base, Glass Vessel, Cap)
- 1 x 30-Watt Incandescent Bulb (E17 base)
Kurmak
Follow these steps to set up your Jambo Liquid Motion Lamp:
- Paketi aç: Tüm bileşenleri dikkatlice ambalajından çıkarın.
- Ampul Montajı: If the bulb is not pre-installed, gently screw the included 30-watt E17 incandescent bulb into the socket located in the lamp base. Do not overtighten.
- Place Glass Vessel: Carefully place the glass vessel onto the lamp base, ensuring it sits securely.
- Attach Cap: Place the decorative cap onto the top of the glass vessel.
- L konumuamp: Monte edilmiş l'yi yerleştirinamp on a flat, stable, and heat-resistant surface, away from direct sunlight, extreme temperatures, or drafts.
- Gücü bağlayın: Güç kablosunu standart 120 voltluk bir elektrik prizine takın.
Kullanım Talimatları
Operating your Jambo Liquid Motion Lamp basittir:
- Aç: Locate the rotary switch on the power cord or base (depending on model) and turn it to the 'ON' position. The bulb will illuminate.
- Isınma Süresi: For the first use, or after extended periods of inactivity, the lamp may take 2-4 hours to fully warm up and for the wax to begin flowing smoothly. This is normal.
- Wax Movement: Once warmed, the wax will begin to soften, rise, and fall in captivating patterns. The lamp operates best at room temperature (20-25°C / 68-77°F).
- Çalışma Süresi: For optimal performance and longevity, it is recommended to operate the lamp for no more than 8-10 hours at a time. Allow it to cool down completely before restarting.
- Kapamak: l'yi kapatmak içinamp, rotate the switch to the 'OFF' position and unplug it from the power outlet when not in use for extended periods.
Bakım
Proper care will ensure the longevity and performance of your lamp:
- Temizlik: l'yi sağlayınamp is unplugged and completely cool before cleaning. Wipe the exterior of the glass and base with a soft, damp cloth. Do not use abrasive cleaners or immerse any part of the lamp suda.
- Ampul Değişimi: If the bulb burns out, unplug the lamp and allow it to cool. Carefully remove the old bulb and replace it with a new 30-watt, E17 base incandescent bulb. Ensure the replacement bulb matches the original specifications.
- Depolamak: L'yi saklıyorsanızamp for an extended period, ensure it is clean, dry, and stored upright in a cool, dark place.
- Açma: Never attempt to open the sealed glass vessel or tamper with its contents. This will void any warranty and can be dangerous.
Sorun giderme
If you encounter issues with your Jambo Liquid Motion Lamp, aşağıdaki yaygın sorunlara ve çözümlere bakın:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Lamp açılmıyor. | No power, faulty bulb, or loose connection. | l'nin olup olmadığını kontrol edinamp is properly plugged in. Ensure the power outlet is functional. Verify the rotary switch is in the 'ON' position. Replace the bulb if it is burnt out. |
| Wax is not moving or moving slowly. | Insufficient warm-up time, cold room temperature, or incorrect bulb wattage. | Allow 2-4 hours for the lamp to fully warm up. Ensure the room temperature is between 20-25°C (68-77°F). Confirm the bulb is a 30-watt E17 incandescent type. |
| Liquid is cloudy. | Initial cloudiness, lamp shaken, or improper storage. | Initial cloudiness often clears after several hours of continuous operation. Avoid shaking or dropping the lamp. If cloudiness persists after multiple uses, contact customer support. |
| Wax is stuck at the top or bottom. | Not fully warmed up, lamp tilted, or excessive heat/cold. | l'yi sağlayınamp has had sufficient warm-up time. Verify the lamp is placed on a level surface. Avoid placing the lamp near heat sources or in very cold areas. |
Özellikler
Key technical specifications for the Jambo 16-inch Liquid Motion Lamp (Model KL-217):
| Özellik | Detay |
|---|---|
| Model Numarası | KL-217 |
| Boyutlar (D x G x Y) | 11.4 cm x 11.4 cm x 39.4 cm (yaklaşık 4.5 x 4.5 x 15.5 inç) |
| Gölge Yüksekliği | 16 inç |
| Güç Kaynağı | Kablolu Elektrik |
| Cilttage | 120 Volt |
| Netage | 30 Watt |
| Ampul Tipi | Akkor |
| Ampul Tabanı | E17 |
| Anahtar Türü | Döner |
| Taban Malzemesi | Alüminyum |
| Gölge Malzemesi | Bardak |
| Bitiş Türü | Metalik |
| İç/Dış Mekan Kullanımı | Kapalı |
| Su Direnç Seviyesi | Su geçirmez değil |
| UPC | 850019692297 |
Garanti ve Destek
Jambo is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.
For technical support, troubleshooting assistance beyond what is covered in this manual, or inquiries regarding parts and service, please contact Jambo customer support through the retailer where you purchased the product or visit the official Jambo webiletişim bilgileri için site.