BBOUNDER 10 Pack Linkable LED Utility Shop Light Instruction Manual

1. Giriş

Welcome to the instruction manual for your BBOUNDER 10 Pack Linkable LED Utility Shop Lights. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixtures. Please read this manual thoroughly before installation and retain it for future reference.

2. Güvenlik Bilgileri

Güvenli çalışmayı sağlamak ve hasarı önlemek için lütfen aşağıdaki güvenlik önlemlerine uyun:

• Aydınlatma armatürünü takmadan, bakımını yapmadan veya temizlemeden önce daima elektriği kesin.
• Aydınlatma armatürünü değiştirmeye veya sökmeye çalışmayın. İçinde kullanıcı tarafından onarılabilecek hiçbir parça bulunmamaktadır.
• Güç kaynağı hacmini sağlayıntage, armatürün gereksinimlerini karşılar (120 Volt).
• Install in accordance with all national and local electrical codes. If unsure, consult a qualified electrician.
• Isı kaynaklarının yakınına veya aşırı nemli yerlere monte etmeyin.amp ortamlar.
• Avoid direct eye exposure to the light source when illuminated, as it is very bright.
• Handle the fixtures with care to prevent damage to the light tubes.

3. Paket İçeriği

Paketinizde tüm bileşenlerin mevcut olduğunu doğrulayın:

• BBOUNDER 4FT LED Utility Shop Lights (10 units)
• 56-inch Power Cord with Plug (10 units)
• 10-inch Hanging Chains (20 units, 2 per light)
• Ceiling Hooks (20 units, 2 per light)
• Mounting Screws (20 units, 2 per light)
• Plastic Anchors (20 units, 2 per light)

Figure 3.1: Included mounting hardware and power cord.

4. Özellikler

Şekil 4.1: Üzeriview of product specifications.

5. Kurulum ve Kurulum

These LED shop lights offer versatile installation options, including surface mounting and suspension mounting. Choose the method best suited for your application.

5.1. Yüzeye Montaj Kurulumu

1. Identify the desired mounting location. Mark the positions for the mounting screws, ensuring they align with the keyholes on the back of the fixture. The fixture dimensions are 46.85 inches in length.
2. Drill pilot holes at the marked locations. If mounting into drywall, insert the plastic anchors.
3. Screw the mounting screws into the pilot holes, leaving a small gap between the screw head and the surface.
4. Align the keyholes on the back of the fixture with the screw heads and slide the fixture into place. Tighten the screws to secure the fixture.

5.2. Süspansiyon Montajı

1. Determine the desired hanging height and location.
2. Screw the ceiling hooks into a sturdy ceiling joist or appropriate anchor points.
3. Attach the hanging chains to the ceiling hooks and to the mounting points on the top of the light fixture.
4. Adjust the chain length to achieve the desired height and level the fixture.

Figure 5.1: Suspending and Ceiling Mounting Options.

5.3. Zincirleme Bağlantı Özelliği

These lights are designed for daisy-chain linking, allowing you to connect up to 4 lights seamlessly from a single power source. This feature helps in reducing wiring complexity and saving energy.

1. Connect the power cord of the first light to a standard 120V outlet.
2. Use the included linkable connectors to connect the output end of the first light to the input end of the second light.
3. Repeat this process for up to 4 lights in a single chain.
4. Açmadan önce tüm bağlantıların sağlam olduğundan emin olun.

Figure 5.2: Daisy-Chain Connection.

Figure 5.3: Installed LED Shop Lights in a Garage Environment.

6. Kullanım Talimatları

Operating your BBOUNDER LED shop lights is straightforward:

• Güç Açma/Kapatma: Once installed and connected to a power outlet, use the in-line switch on the power cord to turn the lights on or off.
• Parlaklık: The lights provide 4400 lumens of 6500K cool daylight illumination, ideal for workshops, garages, and other utility areas.
• Karartılamaz: These fixtures are not designed for use with dimmer switches. Connecting them to a dimmer may cause damage or malfunction.

Figure 6.1: In-line Power Switch.

Figure 6.2: BBOUNDER LED Utility Shop Lights.

7. Bakım

The BBOUNDER LED shop lights are designed for long-lasting performance with minimal maintenance.

• Temizlik: Ensure the fixture is turned off and unplugged before cleaning. Use a soft, dry cloth to wipe down the surface. Do not use abrasive cleaners or solvents, as they may damage the finish or polycarbonate material.
• Dayanıklılık: The unique "D" shaped tube design enhances durability, reducing issues like bending tubes, dark spots, and premature failure often seen in conventional tubes.
• Ampul Değişimi Yok: As integrated LED fixtures, there are no bulbs to replace. The entire unit is designed for a long operational life of approximately 50,000 hours.

Figure 7.1: "D" Shaped Tube for Enhanced Durability.

8. Sorun Giderme

If you encounter any issues with your BBOUNDER LED shop lights, refer to the following table for common problems and solutions:

If the problem persists after attempting these solutions, please contact BBOUNDER customer support.

9. Garanti ve Destek

BBOUNDER is committed to providing high-quality products. For detailed warranty information and customer support, please refer to the following:

• Kullanım Kılavuzu (PDF): An official PDF user manual is available for download: Kullanım Kılavuzu PDF dosyasını indirin
• Koruma Planları: Extended protection plans are available for purchase, offering additional coverage beyond the standard warranty. Options include 3-Year, 4-Year, and Complete Protect plans.
• Satıcı Bilgileri: This product is fulfilled by Amazon and sold by Bbounder Lighting. For direct inquiries, you may visit the BBOUNDER Mağazası Amazon'da.