P110 tutarı

Acmount P110 Car Jump Starter User Manual

Modeli: P110

1. Giriş

Thank you for choosing the Acmount P110 Car Jump Starter. This device is designed to provide a powerful and reliable solution for starting vehicles with dead batteries, as well as serving as a portable power bank and emergency light source. Please read this manual thoroughly before use to ensure safe and optimal operation.

Acmount P110 Car Jump Starter in use, showing 6000A peak current capability for various vehicles.

Image 1.1: The Acmount P110 Car Jump Starter demonstrating its 6000A peak current for starting vehicles up to 10.0L gas or 8.0L diesel engines.

2. Güvenlik Bilgileri

Yaralanmaları veya cihaza ya da araca zarar gelmesini önlemek için her zaman aşağıdaki güvenlik önlemlerine uyun:

  • Donmuş bir aküyü takviyeyle çalıştırmaya çalışmayın.
  • Doğru kutup bağlantısını sağlayın (kırmızı klips)amp pozitif, siyah clamp to negative) to avoid sparks and damage.
  • Pozitif ve negatif cl'yi bağlamayınampBirlikte.
  • Cihazı çocuklardan uzak tutunuz.
  • Cihazı aşırı sıcaklıklara veya neme maruz bırakmayın.
  • Cihaz kullanım sırasında aşırı ısınırsa, işlemi derhal durdurun.
  • Aracınızın kullanım kılavuzunda, akü takviyesiyle çalıştırma prosedürleri hakkında detaylı bilgi bulabilirsiniz.
Acmount P110 Car Jump Starter highlighting 10 protection technologies including spark-proof, reverse-polarity, and over-charge protection.

Image 2.1: The Acmount P110 features 10 protection technologies for safe operation, including spark-proof, reverse-charge, high/low-temp, over-charge, short-circuit, reverse-polarity, AI-software monitoring, over-current, over-voltage ve aşırı yük koruması.

3. Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

  • Acmount P110 Jump Starter
  • Smart Jump Cables (with integrated battery and intelligent clamps)
  • USB Type-C Şarj Kablosu
  • Depolama Kasası
  • Kullanıcı Kılavuzu
Contents of the Acmount P110 Car Jump Starter package, including the jump starter unit, smart jump cables, USB-C charging cable, storage case, and user manual.

Image 3.1: All components included in the Acmount P110 Car Jump Starter package.

4. Ürün Özellikleri ve Bileşenleri

Familiarize yourself with the main parts of your Acmount P110 Jump Starter:

Diagram of Acmount P110 Car Jump Starter components, including Jump Start Output, Compass, Power Button, Indication Display, LED Light (Torch/Strobe/SOS), and USB-C input/output ports.

Image 4.1: Key components of the Acmount P110 Jump Starter.

  • Jump Start Çıkışı: Akıllı takviye kablolarını bağlamak için kullanılan bağlantı noktası.
  • Pusula: Navigasyon desteği için entegre edilmiştir.
  • Güç Düğmesi: Activates the device and controls LED light modes.
  • Indication Display: Shows battery level and output status.
  • LED Işık: Functions as a flashlight, strobe, and SOS signal.
  • USB-C Giriş/Çıkış: Akü takviye cihazını ve harici cihazları şarj etmek için.
  • USB 3.0 Outputs: Dual ports (5V/3A, 9V/2A, 15V/1.5A) for charging smartphones and other USB devices.

5. Kurulum

5.1 Atlama Marşının Şarj Edilmesi

Before initial use, fully charge the Acmount P110 Jump Starter. It is recommended to charge the device every 2-3 months to maintain battery health, even when not in use.

  1. Connect the provided USB Type-C charging cable to the jump starter's USB-C port.
  2. Connect the other end of the USB Type-C cable to a suitable USB wall adapter (not included) or car charger.
  3. The indication display will show the charging progress. The device is fully charged when the display indicates 100%.

Note: Do not charge the starter immediately after a jump-starting operation. Allow the starter to cool down first.

6. Kullanım Talimatları

6.1 Aracın Takviyeyle Çalıştırılması

Aracınızı güvenli bir şekilde çalıştırmak için şu adımları izleyin:

  1. Aracı Hazırlayın: Aracın kontağının kapalı ve el freninin çekili olduğundan emin olun.
  2. Connect the Smart Jump Cables: Insert the blue end of the smart jump cable into the jump start output port on the Acmount P110. Ensure a firm connection.
  3. Cl'yi ekleamps Pil için:
    • Bağlan kırmızı pozitif (+) clamp aracın pozitif (+) akü terminaline.
    • Bağlan siyah negatif (-) clamp aracın negatif (-) akü terminaline.

    Uyarı: Kırmızı ve siyah cl'ye dokunmayın.ampBir kez akü takviye cihazına bağlandıktan sonra bir araya gelirler.

  4. Kontrol Göstergesi: The smart jump cable's indicator light will show its status. A solid green light indicates a safe connection and readiness to jump start. If any other light or sound occurs, refer to the troubleshooting section.
  5. Aracı Çalıştırın: Once the indicator is green, start your vehicle's engine.
  6. Cl'yi kaldıramps: After the engine starts, immediately remove the smart jump cables in reverse order: first the black negative (-) clamp, ardından kırmızı pozitif (+) clamp.
  7. Disconnect from Jump Starter: Disconnect the smart jump cable from the Acmount P110.
Three-step diagram showing how to jump start a vehicle: 1. Insert the jumper cable into the booster. 2. Connect the clamps to your car battery. 3. Start your car engine.

Image 6.1: Visual guide for jump starting your vehicle.

6.2 Elektronik Cihazların Şarj Edilmesi

The Acmount P110 can also function as a portable power bank for your electronic devices.

  1. Connect your device's USB charging cable to one of the USB output ports (USB 3.0 or USB-C) on the Acmount P110.
  2. The jump starter will automatically begin charging your device. The indication display will show the output status.
  3. Şarj işlemi tamamlandıktan sonra cihazınızın bağlantısını kesin.
Acmount P110 Car Jump Starter being used as a portable power bank, showing its capacity to charge multiple devices like iPhones, iPads, Kindles, and smartwatches.

Image 6.2: The Acmount P110 as a portable power supply for various electronic devices.

6.3 LED El Fenerinin Kullanımı

The integrated LED flashlight has three modes: Flashlight, Strobe, and SOS.

  1. El fenerini açmak için: Güç düğmesine uzun basın.
  2. To cycle through modes (Strobe, SOS): Short press the power button while the flashlight is on.
  3. To turn off the flashlight: Güç düğmesine tekrar uzun süre basın.
Acmount P110 Car Jump Starter demonstrating its LED flashlight with three modes: Flashlight (long press), SOS (short press), and Strobe (short press).

Image 6.3: Instructions for operating the LED flashlight modes.

7. Bakım

Proper maintenance ensures the longevity and reliability of your Acmount P110 Jump Starter:

  • Düzenli Şarj: It is recommended to charge the jump starter every 2-3 months to keep the battery in a healthy state, even if not used. This helps prevent deep discharge and extends battery life.
  • Depolamak: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. The device can hold power for about 12 months when not in use.
  • Temizlik: Cihazı yumuşak ve kuru bir bezle silin. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.
  • Sıcaklık Aralığı: The device is designed to work in extreme environments, from -4°F (-20°C) to +140°F (+60°C).
Acmount P110 Car Jump Starter showing a 24-month standby time compared to 6-18 months for other devices, emphasizing long battery life.

Image 7.1: The Acmount P110 offers extended standby time, requiring less frequent charging.

8. Sorun Giderme

If you encounter issues with your Acmount P110 Jump Starter, refer to the following common problems and solutions:

SorunOlası NedenÇözüm
Araç başlamıyorLow charge on jump starter, incorrect clamp connection, severely discharged vehicle battery, vehicle issue.Ensure jump starter is fully charged. Verify clamps are connected correctly (red to +, black to -). Try jump starting again after 30 seconds. If the vehicle still doesn't start, there might be another issue with the vehicle.
akıllı clamp indicator light is not greenIncorrect connection, short circuit, reverse polarity, or other safety protection activated.CL'nin bağlantısını kesamps from both the jump starter and the vehicle battery. Re-read safety instructions and reconnect carefully, ensuring correct polarity. If the issue persists, the vehicle battery might be faulty.
Akü takviye cihazı şarj olmuyor.Faulty charging cable, adapter, or port.Try a different USB-C cable and wall adapter. Ensure the cable is fully inserted into the jump starter's USB-C port.
Jump starter gets hot during useNormal operation under heavy load, or potential overload.A slight warmth is normal. If it becomes excessively hot, disconnect immediately and allow it to cool down. Ensure the vehicle's engine size is within the jump starter's specifications.

Bu çözümleri denedikten sonra sorun devam ederse lütfen müşteri desteğiyle iletişime geçin.

9. Özellikler

ÖzellikŞartname
MarkaMiktar
Model NumarasıP110
Tepe Çıkış Akımı6000 Amps
Pil Kapasitesi20000 Miliamp Saat
Pil Hücresi KompozisyonuLityum İyon
Cilttage14.8 Volt
Motor Uyumluluğu10.0L'ye kadar Gaz veya 8.0L Dizel Motor
Ürün Boyutları (D x G x Y)4"D x 5"G x 9"Y
Ürün Ağırlığı1 Kilogram
USB Çıkışı 15V/3A
USB Çıkışı 29V/2A
USB Çıkışı 315V/1.5A
LED El Feneri ModlarıEl feneri, Flaş, SOS
Çalışma Sıcaklığı-4°F (-20°C) ila +140°F (+60°C)

10. Garanti ve Destek

The Acmount P110 Car Jump Starter comes with a 12 Ay Garanti. Acmount also provides lifetime reliable technical support.

If you have any questions, concerns, or require assistance with your product, please contact our professional after-sales team. We are committed to providing a satisfactory solution.

For support, please refer to the contact information provided on the Acmount official website veya satın alma belgeleriniz.

© 2026 Acmount. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.