Westgate LW360-60W-50K-G2

Westgate LED Wall Pack Instruction Manual

Model: LW360-60W-50K-G2

1. Giriş

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Westgate LED Rotatable Wall Pack, Model LW360-60W-50K-G2. This fixture is designed for general site lighting in outdoor environments such as alleys, loading docks, doorways, pathways, and parking areas. Please read these instructions thoroughly before installation and retain them for future reference.

2. Güvenlik Bilgileri

UYARI: Elektrik çarpması riski vardır. Kurulum veya bakım işlemlerinden önce sigorta veya devre kesiciden elektriği kesin.

  • Kurulum, tüm ulusal ve yerel elektrik yönetmeliklerine uygun olarak, yetkili bir elektrikçi tarafından yapılmalıdır.
  • Tedarik hacmini sağlayıntage is correct for the fixture (120 Volts AC).
  • Do not handle live wires. Always ensure power is off before working on the fixture.
  • Kurulum sırasında koruyucu gözlük ve eldiven de dahil olmak üzere uygun kişisel koruyucu ekipman (KKD) kullanın.
  • Düşmeyi önlemek için armatürün güvenli bir şekilde monte edildiğinden emin olun.
  • Aydınlatma armatüründe hiçbir şekilde değişiklik yapmayın. Yetkisiz değişiklikler garantiyi geçersiz kılabilir ve güvenlik tehlikeleri oluşturabilir.
  • This product is rated IP65, suitable for wet locations. Ensure all connections are properly sealed to maintain this rating.

3. Ürün Özellikleri

  • Rotatable Heads (with Set Screw) for adjustable light direction.
  • Three 1/2" Threaded Knockouts: One on the bottom, and one on each side for versatile wiring options.
  • TIR Optic Lens - TYPE II for efficient light distribution.
  • Die-cast aluminum housing with powder coat finish (Dark Bronze) for durability and weather resistance.
  • 7-Year Warranty for long-term reliability.
  • IP65 rated, suitable for wet outdoor locations.
Westgate LED Wall Pack, angled view

Resim 3.1: Açısal view of the Westgate LED Wall Pack, showcasing its robust dark bronze housing and dual LED light panels.

4. Paket İçeriği

Kuruluma başlamadan önce tüm bileşenlerin mevcut ve hasarsız olduğundan emin olun.

  • 1 x Westgate LED Wall Pack (Model LW360-60W-50K-G2)
  • Mounting Hardware (screws, anchors, gaskets as applicable)
  • Kullanım Kılavuzu (bu belge)

5. Kurulum ve Kurulum

Önemli: Kurulum işlemine başlamadan önce devre kesiciden elektriğin kesildiğinden emin olun.

5.1 Armatürün Montajı

  1. Choose a suitable mounting location on a wall or vertical surface, ensuring it can support the fixture's weight (approximately 6 pounds).
  2. Mark the desired mounting points using the fixture's mounting plate as a template.
  3. Drill pilot holes if necessary, and insert appropriate wall anchors for your mounting surface.
  4. Secure the mounting plate to the wall using the provided mounting hardware. Ensure it is level and firmly attached.
  5. Carefully attach the fixture body to the mounting plate, ensuring all gaskets are properly seated to maintain the IP65 rating.
Westgate LED Wall Pack, front view

Resim 5.1: Ön view of the Westgate LED Wall Pack, showing the two LED panels and the mounting screw locations at the base.

5.2 Elektrik Kablolama

Tüm kablolama yerel ve ulusal elektrik yönetmeliklerine uygun olmalıdır.

  1. Route the electrical supply wires through one of the 1/2" threaded knockouts on the fixture.
  2. Besleme kablolarını armatürün kablolarına bağlayın:
    • Black wire (Live) to Black wire (Live)
    • White wire (Neutral) to White wire (Neutral)
    • Green/Bare Copper wire (Ground) to Green/Bare Copper wire (Ground)
  3. Tüm kablo bağlantılarını uygun kablo somunları veya konektörlerle sabitleyin.
  4. Tüm bağlantıların sıkı ve uygun şekilde yalıtılmış olduğundan emin olun.
  5. Carefully tuck all wires into the junction box or fixture housing, ensuring no wires are pinched.
  6. Close and secure the fixture cover, ensuring a watertight seal.
Westgate LED Wall Pack, side view

Resim 5.2: Yan view of the Westgate LED Wall Pack, illustrating the profile and potential access points for wiring.

6. Kullanım Talimatları

  1. Once installation and wiring are complete, restore power at the circuit breaker.
  2. The LED Wall Pack will illuminate.
  3. To adjust the light direction, carefully loosen the set screws on the rotatable heads, adjust to the desired angle, and then securely tighten the set screws. Do not overtighten.

7. Bakım

Regular maintenance ensures optimal performance and longevity of your LED Wall Pack.

  • Temizlik: Armatürün dış yüzeyini periyodik olarak yumuşak bir bezle temizleyin.amp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or optical components. Ensure power is off before cleaning.
  • Denetleme: Annually inspect the fixture for any signs of damage, loose connections, or wear. Check for any water ingress or corrosion. Address any issues promptly.
  • LED'ler: LED ışık kaynağı uzun ömürlü olacak şekilde tasarlanmıştır ve kullanıcı tarafından onarılamaz. Tek tek LED'leri değiştirmeye çalışmayın.

8. Sorun Giderme

If you experience issues with your LED Wall Pack, refer to the table below for common problems and solutions.

SorunOlası NedenÇözüm
Fixture does not illuminate.Güç kaynağı yok.
Gevşek kablo bağlantısı.
Faulty circuit breaker/fuse.
Check power supply at the source.
Tüm kablo bağlantılarının sağlam olduğundan emin olun (gücün kapalı olduğundan emin olun).
Sigortayı değiştirin veya sigortayı sıfırlayın.
Işık titriyor veya sönükleşiyor.Dengesiz güç kaynağı.
Gevşek kablolama.
Incompatible dimmer (if applicable, though this fixture is not specified as dimmable).
Consult an electrician to check power stability.
Check and secure all wiring connections (ensure power is off).
Ensure no dimmer is used unless specified.
Water inside the fixture.Montaj sırasında yanlış sızdırmazlık.
Hasarlı conta.
Immediately disconnect power. Open fixture, dry thoroughly, and re-seal all entry points and covers. Replace damaged gaskets.

If the problem persists after attempting these solutions, contact Westgate customer support or a qualified electrician.

9. Özellikler

MarkaBatı kapısı
Model AdıLW360-60W-50K-G2
UPC845060072310
RenkKoyu Bronz
MalzemeDie-Cast Aluminum with Powder Coat Finish
Işık Kaynağı TürüNEDEN OLMUŞ
Netage60 watt
Cilttage120 Volt (AC)
İç/Dış Mekan KullanımıDış mekan
Özel ÖzelliklerIP65 Rated, Suitable for Wet Locations
Montaj TipiDuvara Montaj
Ürün Ağırlığı6 Pound
Boyutlar (Yaklaşık)9.1" (Width) x 8.8" (Height) x 5.2" (Depth)
Westgate LED Wall Pack dimensions diagram

Image 9.1: Dimensional drawing of the Westgate LED Wall Pack, showing approximate measurements of 9.1 inches width, 8.8 inches height, and 5.2 inches depth.

10. Garanti Bilgileri

This Westgate LED Wall Pack (Model LW360-60W-50K-G2) is covered by a 7 Yıllık Garanti from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service. For warranty claims or further details, please contact Westgate customer support.

11. Destek ve İletişim

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Westgate customer support.

You can find more information and contact details on the official Westgate websiteleri üzerinden veya Amazon mağaza sayfaları aracılığıyla:

Visit the Westgate Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.