Crystorama Libby Langdon Sylvan 4 Işık Siyah Dövme Fener Avize Kullanım Kılavuzu

1. Giriş

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Crystorama Libby Langdon Sylvan 4 Light Black Forged Lantern Chandelier. Please read all instructions carefully before beginning installation and retain this manual for future reference. Proper installation by a qualified electrician is recommended.

Resim 1.1: Ön view of the Crystorama Libby Langdon Sylvan 4 Light Black Forged Lantern Chandelier with shades.

2. Önemli Güvenlik Bilgileri

Yangın, elektrik çarpması veya kişisel yaralanma riskini azaltmak için her zaman şu temel önlemlere uyun:

• Gücü Kesin: Always turn off the electrical supply at the main fuse or circuit breaker box before beginning installation or performing any maintenance.
• Kalifiye Elektrikçi: Installation should be performed by a qualified, licensed electrician.
• Topraklama: Olası elektrik çarpmasını önlemek için armatürün doğru şekilde topraklanmış olduğundan emin olun.
• Kablolama: Tüm kablo bağlantıları yerel ve ulusal elektrik yönetmeliklerine uygun olarak yapılmalıdır.
• Ampul Wattage: Maksimum su miktarını aşmayıntage specified for the bulbs. This fixture is designed for E12 base bulbs, up to 60 watts each.
• İşleme: Handle the fixture and glass components with care to prevent breakage or injury.
• UL Listelenmiştir: This product is UL listed, ensuring it meets specific safety standards.

3. Ürün Özellikleri

Image 3.1: Dimensional drawing of the chandelier, showing 21.5" width, 29.75" height, and 72" chain length.

4. Paket İçeriği

Carefully unpack your new chandelier and lay out all parts on a clean, soft surface. Ensure all components are present before discarding packaging materials.

• Chandelier Frame (Black Forged)
• 4 Glass Shades (White Enclosed)
• Mounting Hardware Kit (Canopy, Mounting Plate, Screws, Wire Nuts)
• Chain and Wiring (Pre-attached or separate for assembly)
• Kullanım Kılavuzu

Not: Bulbs are not included with this fixture. Four (4) E12 base bulbs, up to 60 watts each, are required.

Resim 4.1: Yakın çekim view of the four E12 bulb sockets and white enclosed glass shades.

5. Kurulum ve Kurulum

This chandelier is designed for semi-flush mount installation. Professional installation by a licensed electrician is strongly recommended.

Gerekli Aletler ve Malzemeler (Dahil Değildir):

• Yıldız uçlu tornavidalar
• Düz tornavida
• Tel Soyucular
• Pense
• Elektrik Bandı
• Güvenlik Gözlükleri
• Merdiven
• E12 Base Bulbs (4, max 60W each)

Kurulum Adımları:

1. Gücü Kapatın: Locate the circuit breaker that supplies power to the installation location and turn it off. Verify power is off using a voltage test cihazı.
2. Montajı Hazırlayın: Birlikte verilen vidaları kullanarak montaj plakasını tavandaki bağlantı kutusuna takın. Sağlam bir şekilde sabitlendiğinden emin olun.
3. Adjust Chain Length (if applicable): If your fixture includes a chain, determine the desired hanging height and adjust the chain length by removing links as needed. Feed the electrical wires through the chain and canopy.
4. Elektrik Bağlantılarını Yapın: Connect the fixture's wires to the house wiring.
   • Connect the bare copper (ground) wire from the fixture to the green or bare copper ground wire from the junction box.
   • Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box.
   • Aydınlatma armatüründen gelen beyaz (nötr) kabloyu, bağlantı kutusundan gelen beyaz (nötr) kabloya bağlayın.
   Tüm bağlantıları kablo somunlarıyla sabitleyin ve ek güvenlik için elektrik bandıyla sarın.
5. Güvenli Gölgelik: Carefully push the canopy up to the ceiling, covering the junction box, and secure it with the provided screws or nuts.
6. Ampulleri yükleyin: Screw four (4) E12 base bulbs (not included) into the sockets. Do not exceed 60 watts per bulb.
7. Gölgelikleri Takın: Carefully place the white enclosed glass shades over each bulb socket.
8. Gücü Geri Yükle: Sigortadan elektriği tekrar açın.

Resim 5.1: Açısal view of the chandelier, showcasing its black forged frame and white shades.

6. Kullanım Talimatları

Once installed, your Crystorama Libby Langdon Sylvan Chandelier operates via a standard wall switch connected to the fixture's electrical circuit. Simply toggle the wall switch to turn the chandelier on or off.

This fixture is compatible with dimmable E12 LED bulbs if connected to a compatible dimmer switch (sold separately).

7. Bakım ve Onarım

Regular cleaning and proper care will help maintain the appearance and functionality of your chandelier.

Temizlik:

• Her Zaman Gücü Kesin: Before cleaning, ensure the power supply to the fixture is turned off at the circuit breaker.
• Çerçeve: Wipe the black forged metal frame with a soft, dry, or slightly damp cloth. Avoid abrasive cleaners, solvents, or polishes, as these can damage the finish.
• Cam Abajurlar: The white enclosed glass shades can be gently wiped with a soft, damp cloth. For stubborn marks, a mild glass cleaner can be used sparingly on the cloth, not directly on the glass. Ensure shades are completely dry before restoring power.

Ampul Değişimi:

• Gücü Kapatın: Always turn off the power at the circuit breaker before replacing bulbs.
• Soğutmaya İzin Ver: Ampullere dokunmadan önce tamamen soğumalarını bekleyin.
• Yer değiştirmek: Unscrew the old bulb and screw in a new E12 base bulb. Ensure the replacement bulb does not exceed 60 watts.

8. Sorun Giderme

If you experience issues with your chandelier, consult the following common problems and solutions:

If the issue persists after attempting these solutions, please contact Crystorama customer support or a qualified electrician.

9. Garanti ve Destek

This Crystorama Libby Langdon Sylvan Chandelier is covered by a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your purchase or visit the official Crystorama webalan.

For additional assistance, you may contact Crystorama customer service directly.