Philips Jump Starter Instruction Manual

1. Giriş

Thank you for choosing the Philips Jump Starter DLP8086N. This device is a portable, high-capacity power bank designed to jump-start 12V vehicles and charge various electronic devices. It features an 800A peak current and a 12000mAh battery, making it suitable for gasoline engines up to 6.0L and diesel engines up to 3.0L. Please read this manual carefully before use to ensure safe and optimal performance.

2. Ürün Bileşenleri

Paketin içeriği şu şekildedir:

• Philips Jump Starter Unit (DLP8086N)
• Smart Jump Starter Cables with clamps
• Mikro USB Şarj Kablosu
• Instruction Manual (with Warranty Card)

Image: Philips Jump Starter DLP8086N with its various ports and buttons labeled, including the power button, Micro USB input, USB output ports, LED light, and jump start port.

3. Özellikler

4. Safety Information and Protections

The Philips Jump Starter is equipped with multiple safety features to prevent accidents and ensure user safety. These include:

• Kısa Devre Koruması
• Aşırı Yük Koruması
• Aşırı deşarj koruması
• Ters Bağlantı Koruması
• Ters Şarj Koruması
• Aşırı Akım Koruması
• Aşırı Isınma Koruması
• Ters Polarite Koruması

akıllı clamps feature DSLI technology and communicate with the Battery Management System (BMS) to prevent potential errors that could damage the device or vehicle. Always follow the instructions carefully.

Image: Philips Jump Starter unit shown with its smart clamps, illustrating the various safety protection icons such as short circuit, overcharge, over-discharge, reverse connection, reverse charge, overcurrent, overheat, and reverse polarity protection.

5. Cihazın Kurulumu ve Şarj Edilmesi

5.1 Atlama Marşının Şarj Edilmesi

Before first use, fully charge the jump starter. Connect the provided Micro USB charging cable to the Micro USB input port on the jump starter and to a USB power adapter (not included). The LED indicators will show the charging status. A full charge typically takes less than 5 hours.

5.2 Pil Seviyesini Kontrol Etme

Press the power button once to check the battery level. The blue LED indicators will light up, showing the remaining charge.

6. Kullanım Talimatları

6.1 Aracın Takviyeyle Çalıştırılması

Aracınızı güvenli bir şekilde çalıştırmak için şu adımları izleyin:

1. Akü takviye cihazının yeterince şarj edilmiş olduğundan emin olun.
2. Insert the blue end of the smart jump starter cable into the jump start port on the unit. Ensure a firm connection.
3. Kırmızı cl'yi bağlayınamp Aracınızın aküsünün pozitif (+) kutbuna.
4. Siyah cl'yi bağlayınamp Aracınızın aküsünün negatif (-) kutbuna.
5. Once connected, the indicator on the smart cable should show a solid green light, indicating a safe connection. If it shows a red light or flashes, check the connections.
6. Aracınızın motorunu çalıştırın.
7. Once the engine starts, immediately remove the smart jump starter cable from the vehicle battery terminals, then disconnect it from the jump starter unit.

Image: A four-panel illustration demonstrating the jump-starting process: 1. Inserting the jump starter cable into the unit. 2. Connecting the red clamp pozitif akü terminaline ve siyah cl'yeamp to the negative terminal. 3. Starting the car engine. 4. Removing the jump starter cable from the battery.

6.2 Elektronik Cihazların Şarj Edilmesi

The jump starter features two QC3.0 USB output ports for charging smartphones, tablets, and other electronic devices. Connect your device's USB charging cable to one of the USB output ports on the jump starter. The unit will automatically begin charging your device.

Image: The Philips Jump Starter unit connected via USB cables to a smartphone and a tablet, demonstrating its capability to charge electronic devices.

6.3 LED Işığının Kullanımı

Dahili LED ışık, çeşitli durumlar için üç farklı mod sunar:

• Spot Işığı Modu: Karanlık ortamlarda genel aydınlatma için.
• Acil Durum Modu: Acil durumlarda SOS sinyali gönderir.
• Flaş Modu: Sinyal vermek veya dikkat çekmek için kullanılan yanıp sönen ışık.

To cycle through the modes, press the LED light button repeatedly.

Image: A hand holding the Philips Jump Starter, with its LED light illuminating a dark engine bay. Icons below illustrate the three light modes: SOS, Strobe, and Spotlight.

7. Bakım

To ensure the longevity and optimal performance of your Philips Jump Starter:

• Üniteyi serin, kuru ve doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak bir yerde saklayın.
• Pil ömrünü uzatmak için, cihaz kullanılmasa bile 3-6 ayda bir şarj edin.
• Dış yüzeyi yumuşak, damp bez. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.
• Keep the jump start ports and USB ports free from dust and debris.

8. Sorun Giderme

If you encounter issues with your Philips Jump Starter, refer to the following common solutions:

• Ünite açılmıyor: Ensure the unit is charged. Press and hold the power button for a few seconds.
• Araç çalışmıyor: Akıllı cihazın düzgün çalıştığını kontrol edin.amps are securely connected to the correct battery terminals (red to positive, black to negative). Ensure the smart cable indicator shows a solid green light. The vehicle battery might be severely discharged; try waiting a few minutes after connecting before attempting to start.
• Unit does not charge: Verify that the Micro USB charging cable is properly connected to both the jump starter and the power adapter. Try using a different USB power adapter or cable.
• Electronic devices do not charge: Ensure the jump starter has sufficient charge. Check the USB cable connection to both the jump starter and the device.

9. Garanti ve Destek

This Philips Jump Starter DLP8086N comes with a 1 yıllık üretici garantisiGaranti talepleri için lütfen satın alma fişinizi saklayın.

For any questions, concerns, or technical support regarding your product, please contact Philips customer service. Refer to the warranty card included in your package for specific contact information.

Image: A smiling customer support representative wearing a headset, symbolizing available product support.