AOPUTTRIVER AP-5800M PM2.5 Air Quality Monitor User Manual

1. Giriş

The AOPUTTRIVER AP-5800M is a high-precision air quality monitor designed to detect fine particulate matter, specifically PM2.5, PM1.0, and PM10. Utilizing a laser PM2.5 sensor and single-chip microcomputer technology, this device provides accurate readings displayed on a 2.8-inch TFT color LCD. It is suitable for monitoring air quality in various environments, including indoor spaces, outdoor areas, bedrooms, factories, construction sites, and during travel.

This manual provides essential information for the safe and effective use of your AP-5800M air quality monitor. Please read it thoroughly before operation.

2. Güvenlik Bilgileri

• Cihazı sökmeye veya üzerinde değişiklik yapmaya çalışmayın. Yetkisiz değişiklikler arızaya veya yaralanmaya yol açabilir.
• Keep the device away from water and high humidity to prevent electrical shock or damage.
• Cihazı aşırı sıcaklıklara, doğrudan güneş ışığına veya aşındırıcı maddelere maruz bırakmaktan kaçının.
• Use only the provided USB cable for charging. Ensure the charging voltagcihazla uyumludur.
• Çocukların erişemeyeceği yerde saklayınız.
• Cihazı ve pilini yerel çevre yönetmeliklerine uygun şekilde imha edin.

3. Paket İçeriği

Paketi açtığınızda aşağıda listelenen tüm öğelerin mevcut ve iyi durumda olduğundan emin olun:

• 1 x AOPUTTRIVER AP-5800M Air Quality Monitor
• 1 x USB Şarj Kablosu
• 1 x Taşıma Çantası
• 1 x Kullanım Kılavuzu

This image displays the items included in the product package: the AP-5800M air quality monitor, a USB cable, a carrying case, and the user manual.

4. Ürün Bittiview

4.1 Cihaz Düzeni ve Düğmeler

Bu görüntü ön tarafı gösteriyor view of the AOPUTTRIVER AP-5800M Air Quality Monitor, highlighting the 2.8-inch TFT true color LCD, the sensitive sensor area, and the functions of the UP, Power, BACK, DOWN, ENTER, and RUN/STOP buttons.

1. Sensitive Sensor: Located at the top, responsible for detecting particulate matter.
2. YUKARI Düğmesi: Moves the cursor up or changes the setting of the cursor position.
3. Güç Düğmesi: Briefly press for 0.5 seconds to turn the device on or off.
4. Geri düğmesi: Önceki menüye dönmek için basın.
5. AŞAĞI Düğmesi: Moves the cursor down or changes the setting of the cursor position.
6. GİRİŞ Düğmesi: Press to select the highlighted menu item.
7. ÇALIŞTIR/DURDUR Düğmesi: Press this key in real-time mode to start or stop the measurement.

4.2 Ekran ve Göstergeler

The device features a 2.8-inch TFT true color LCD, providing clear visibility even in low-light conditions. The display shows real-time readings for PM2.5, PM1.0, and PM10, along with a hazard index and battery indicator.

Bu görüntü yakın çekim sağlar view of the AP-5800M's colorful LCD display, showing the comprehensive test results for PM2.5, PM1.0, and PM10, along with the hazard index.

4.3 Dahili Bileşenler

This diagram shows the internal components of the AP-5800M, emphasizing the high-precision laser PM2.5 sensor and the 3rd generation particle sensor responsible for detecting PM2.5 and PM10 in air samples.

Bu görüntü yakın çekim sağlar view of the air outlet and inlet on the device, illustrating how air samples are drawn in and expelled for particle detection.

5. Kurulum

5.1 Cihazı Şarj Etme

The AP-5800M is equipped with a rechargeable battery. Before first use, or when the battery indicator shows low power, charge the device using the provided USB cable.

• Connect the USB cable to the device's charging port and to a standard USB power source (e.g., computer, USB wall adapter).
• Şarj işlemi sırasında kırmızı bir gösterge ışığı yanacaktır.
• The indicator light will turn green once the battery is fully charged.

This image depicts the charging process of the AP-5800M's 2000mAh rechargeable battery via a USB cable, with an indicator showing the battery level.

5.2 İlk Güç Açma

After charging, press the Power Button briefly (for approximately 0.5 seconds) to turn on the device. The display will light up, and the device will begin its startup sequence.

6. Kullanım Talimatları

6.1 Güç Açma/Kapatma

• Açmak İçin: Basın Güç Düğmesi (labeled '3' in the diagram) for approximately 0.5 seconds.
• Kapatmak İçin: Basın Güç Düğmesi for approximately 0.5 seconds. The device also features an automatic power-off mode to conserve battery.

6.2 Menülerde Gezinme

Use the following buttons for menu navigation:

• YUKARI Düğmesi: Move cursor up or increase values.
• AŞAĞI Düğmesi: Move cursor down or decrease values.
• GİRİŞ Düğmesi: Seçimi onaylayın veya bir alt menüye girin.
• Geri düğmesi: Return to the previous menu or cancel an action.

6.3 Starting and Stopping Measurements

In real-time measurement mode, press the ÇALIŞTIR/DURDUR Düğmesi to initiate or pause the air quality measurement process.

6.4 Ekranı Anlamak

The 2.8-inch TFT color LCD displays various parameters:

• PM2.5, PM1.0, PM10 Values: Real-time concentration in µg/m³.
• Hazard Index: A calculated risk value based on PM2.5, PM1.0, and PM10 levels. The formula used is: Hazard Value = PM2.5/6 + PM1.0/20 + PM10/20.
• Pil Göstergesi: Mevcut pil seviyesini gösterir.

This image illustrates the AP-5800M monitor on its stand, alongside a color-coded chart explaining PM2.5 and PM10 health concern levels, ranging from Good to Hazardous.

Bu görüntü büyütülmüş bir şekilde gösteriliyor view of the hazard index chart displayed on the AP-5800M, detailing the color-coded levels of air quality from Good to Hazardous for PM2.5 and PM10.

6.5 Setting Parameters and Alarms

The AP-5800M allows for various settings adjustments, including:

• Zaman Ayarı: Adjust the device's internal clock.
• Veri kaydı: Enable or disable the recording of measurement data.
• Veri tutma: Freeze the current display readings.
• Hazard Index Alarm: Set thresholds for an audible alarm to activate when air quality levels exceed predefined limits. The device features an audible alarm.

This image highlights the audible alarm function of the AP-5800M, showing an alarm icon on the display and indicating that the device can emit sound alerts for high particle levels.

6.6 Usage Environments

The AP-5800M is versatile and can be used in a variety of settings to monitor air quality:

This image demonstrates the versatility of the AP-5800M, showing it in different scenarios such as industrial pollution, automobile exhaust, volcanic ash, and ship pollution, indicating its suitability for diverse testing environments.

This image combines a PM2.5/PM10 air quality level guide with illustrations of various suitable usage environments, including home, school, car, and office, demonstrating the monitor's versatility.

7. Bakım

7.1 Cihazın Temizlenmesi

• Cihazın dışını yumuşak ve kuru bir bezle silin.
• Aşındırıcı temizleyiciler, çözücüler veya sert kimyasallar kullanmayın, çünkü bunlar yüzeye zarar verebilir.asing veya göster.
• Ensure the air inlet and outlet are free from dust and obstructions for accurate readings.

7.2 Pil Bakımı

• Pil ömrünü uzatmak için pili sık sık tamamen boşaltmaktan kaçının.
• If storing the device for an extended period, charge it to approximately 50% and recharge every few months.

7.3 Depolama

Cihazı taşıma çantası içinde, serin, kuru bir yerde, doğrudan güneş ışığından ve aşırı sıcaklıklardan uzakta saklayın.

8. Sorun Giderme

If you encounter issues with your AP-5800M, refer to the following common problems and solutions:

9. Özellikler

Bu görüntü ayrıntılı bir bilgi sağlar view of the AP-5800M, showing its dimensions (196mm height, 95mm width, 46mm depth), the 90-degree support stand, the double protective shell, and the tripod hole for mounting.

10. Garanti ve Destek

AOPUTTRIVER offers a 2-year warranty for the AP-5800M Air Quality Monitor and provides lifetime customer service. If you encounter any issues with this product or require assistance, please do not hesitate to contact our customer support team. We are committed to ensuring your satisfaction.