AOPUTTRIVER AP-570S-APP Bluetooth Clamp Sayaç Kullanım Kılavuzu

1. Giriş

The AOPUTTRIVER AP-570S-APP is a portable, high-performance digital clamp meter designed for accurate measurement of various electrical parameters. This device features Bluetooth connectivity, allowing it to pair with mobile phones for data logging and analysis. It is suitable for troubleshooting electrical problems in home improvement, appliance repair, line maintenance, and car repair applications.

Image 1.1: The AP-570S-APP Clamp Meter being used in different electrical measurement scenarios, including home wiring, appliance repair, and automotive diagnostics.

2. Güvenlik Bilgileri

Please read all safety warnings and operating instructions carefully before using this instrument. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Her zaman cl'ninamp meter is in good working condition before use. Inspect for any damage to the casing, test leads, or insulation.
• Ölçüm cihazında hasar varsa veya yalıtımı bozulmuşsa cihazı kullanmayın.
• Tüm yerel ve ulusal güvenlik kurallarına uyun.
• Yalnız çalışmaktan kaçının.
• Vol ile çalışırken dikkatli oluntag30V AC RMS, 42V tepe veya 60V DC'nin üzerinde. Bu hacimtagşok tehlikesi yaratabilir.
• Always disconnect power to the circuit under test before making connections or disconnections, especially when measuring resistance, capacitance, or performing diode tests.
• The AP-570S-APP features a double insulation design for enhanced protection. However, always exercise caution.
• Temassız Cilttage (NCV) detection feature allows for voltage detection without direct contact, improving safety.
• Replace the battery promptly when the low battery indicator appears to ensure accurate readings and proper operation.

Resim 2.1: clamp meter with a rubber sleeve for protection against drops and emphasizing safety features like double insulation.

3. Ürün Özellikleri

• Multifunction Measurement: Accurately measures AC/DC Voltage (600mV-1000V), AC/DC Current (600A-1000A), Resistance (600Ω-60MΩ), Capacitance (6nF-60mF), Frequency (9.999Hz-9.999MHz), Duty Cycle, Diode, and Continuity.
• Bluetooth APP Connectivity: Connects to mobile phones (Android/iOS) via Bluetooth for real-time data display, logging, and analysis using the "AiLink" app.
• Sıcaklık ölçümü: Includes a thermocouple for temperature testing, with switchable units (℃/℉).
• Temassız Hacimtage (NCV) Tespiti: AC voltajını güvenli bir şekilde algılartage without direct contact, indicated by sound and light.
• Arka Işık Ekranı: Large LCD with backlight for clear readings in dark environments.
• Veri tutma: Ekrandaki mevcut okumayı dondurur.
• MAX/MIN Fonksiyonu: Ölçülen maksimum ve minimum değerleri kaydeder.
• REL (Göreli) Modu: Measures the change in a signal relative to a stored reference value.
• Otomatik/Manuel Menzil Belirleme: Offers flexibility in measurement ranges.
• Double Insulation Design: Provides enhanced user safety.
• Otomatik Kapanma: Pil ömrünü korur.

4. Layout Introduction (Components)

Familiarize yourself with the different parts of your AOPUTTRIVER AP-570S-APP Clamp Metre:

Image 4.1: Detailed diagram showing the layout and functions of the clamp meter's various parts.

1. Clamp Çeneler: Opens up to 45mm to enclose a conductor for current measurement.
2. NCV Algılama Alanı: Temassız vol. alanıtage algılama.
3. Jaw-Opening Handle: Kapıyı açıp kapatmak için kullanılır.amp çeneler.
4. Döner anahtar: Selects measurement functions and ranges.
5. HOLD Anahtarı: Press to hold the current reading. Press and hold for more than 2 seconds to activate/deactivate backlight.
6. Anahtar Seçimi: Used to switch between functions within a rotary switch position (e.g., AC/DC voltage, diode/continuity, capacitance).
7. MAX/MIN Tuşu: Press to display the maximum or minimum measured value. Press and hold for 2 seconds to exit.
8. REL Key: Bağıl ölçüm modunu etkinleştirir.
9. Hz/Görev Tuşu: In ACV/ACA or Hz range, press to choose between Frequency (Hz) or Duty Cycle measurement.
10. LCD Ekran: 6000 counts digital display with full function symbols.
11. COM Giriş Jakı: Test uçları için ortak (negatif) giriş.
12. VΩHzT+ Input Jack: Hacim için pozitif giriştage, resistance, frequency, temperature, and capacitance measurements.

5. Kurulum

5.1 Pil Kurulumu

The AP-570S-APP requires a 9V battery for operation. To install or replace the battery:

1. cl'yi sağlayınamp meter is turned OFF (Rotary Switch set to OFF).
2. Ölçüm cihazının arkasındaki pil bölmesi kapağını bulun.
3. Pil bölmesini açmak için bir tornavida kullanın.
4. Connect the 9V battery to the battery clips, observing correct polarity.
5. Place the battery into the compartment and secure the cover.

5.2 İlk Güç Açma

After battery installation, turn the Rotary Switch from OFF to any desired measurement function to power on the device. The LCD display will illuminate.

Resim 5.1: clamp meter shown with its packaging, carrying bag, test leads, thermocouple, and 9V battery.

6. Kullanım Talimatları

To perform measurements, rotate the Rotary Switch to the desired function. Connect test leads or use the clamp jaws as appropriate for the measurement type.

6.1 AC/DC Akım Ölçümü

1. Set the Rotary Switch to the 600A~1000A konum.
2. Basın SEÇME key to switch between AC (~) and DC (—) current measurement if necessary.
3. Cl'yi açamp jaws using the jaw-opening handle.
4. İletkenlerden yalnızca birini klipsle kapatın.amp jaws. Ensure the conductor is centered within the jaws for accurate readings.
5. LCD ekranda mevcut değeri okuyun.

Note: For currents between 0-600A, resolution is 0.1A. For 600-1000A, resolution is 1.0A.

6.2 AC/DC Cilttage Ölçüm

1. Set the Rotary Switch to the V— or V~ konum.
2. Basın SEÇME key to switch between AC (~) and DC (—) voltagGerekirse ölçüm yapın.
3. Siyah test kablosunu Bİlgİ Jack ve kırmızı test kurşunu VΩHzT+ kriko.
4. Test problarını ölçülecek devreye veya bileşene bağlayın.
5. Cildi okutagLCD ekranda e değeri.

6.3 Resistance, Diode, Continuity, and Capacitance Measurement

1. Set the Rotary Switch to the Ω konum.
2. Basın SEÇME key to cycle through Resistance (Ω), Diode Test (→|), Continuity Test (♫), and Capacitance (—||—) functions.
3. Siyah test kablosunu Bİlgİ Jack ve kırmızı test kurşunu VΩHzT+ kriko.
4. Connect the test probes to the component.
5. Read the value on the LCD display. For continuity, an audible beep indicates a continuous circuit.

6.4 Frekans ve Görev Döngüsü Ölçümü

1. Set the Rotary Switch to the Hz konum.
2. Siyah test kablosunu Bİlgİ Jack ve kırmızı test kurşunu VΩHzT+ kriko.
3. Test problarını sinyal kaynağına bağlayın.
4. Basın Hz/Görev key to switch between Frequency (Hz) and Duty Cycle (%).
5. LCD ekrandaki değeri okuyun.

6.5 Sıcaklık Ölçümü

1. Set the Rotary Switch to the °C/°F konum.
2. Insert the thermocouple into the Bİlgİ Ve VΩHzT+ krikolar, polariteyi gözlemleyerek.
3. Termokupl probunu sıcaklığın ölçüleceği noktaya yerleştirin.
4. Basın SEÇME key to switch between Celsius (°C) and Fahrenheit (°F).
5. LCD ekranda sıcaklık değerini okuyun.

Resim 6.1: clamp meter displaying temperature readings in both Celsius and Fahrenheit, with a thermocouple probe immersed in water.

6.6 Temassız Hacimtage (NCV) Tespiti

1. Set the Rotary Switch to the NCV konum.
2. Move the NCV detection area of the meter close to the wire or conductor where voltage şüphelidir.
3. AC hacmi isetage is detected, the meter will emit an audible beep and the NCV indicator light will illuminate.

Resim 6.2: clamp temassız hacim algılayan sayaçtage near an electrical outlet, indicated by a red glow and 'bi bi' sound representation.

6.7 Arka Aydınlatma Fonksiyonu

To activate or deactivate the backlight, press and hold the TUTMAK button for more than 2 seconds. The backlight improves visibility in dimly lit conditions.

Image 6.3: Comparison of the clamp meter's LCD display, showing improved readability with the backlight activated.

7. Bluetooth APP Connection

The AP-570S-APP can connect to your mobile device via Bluetooth for enhanced functionality, including data logging and analysis.

1. Uygulamayı indirin: Scan the QR code below or search for "AiLink" in the Google Play Store (for Android) or Apple App Store (for iOS). Download and install the application.
2. Kayıt Ol/Giriş Yap: Open the AiLink app. You may need to register a new account or log in using an existing account (e.g., Facebook or Apple ID).
3. Cl'yi bağlayınamp Metre: Ensure Bluetooth is enabled on your mobile phone. In the AiLink app, press the "ADD" or "+" button to search for nearby devices. Select the clamp meter from the list to connect.
4. Start Measurement and Analysis: Bağlandıktan sonra, yapabilirsiniz view real-time data, save measurements, and analyze them within the app. The app allows for data export (e.g., CSV fileS).

Image 7.1: Visual guide demonstrating the steps to download the AiLink app, log in, connect to the clamp meter, and view veri.

Download AiLink App: https://aicare.net.cn/app/ailink/download/

8. Bakım

• Temizlik: Sayaç c'yi düzenli olarak silin.asing ile reklamamp bez ve hafif deterjan. Aşındırıcı maddeler veya çözücüler kullanmayın.
• Pil Değişimi: Replace the 9V battery when the low battery indicator appears on the display. Always turn off the meter before replacing the battery.
• Depolamak: If the meter is not used for an extended period, remove the battery to prevent leakage. Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures.
• Kalibrasyon: For professional use, periodic calibration by a qualified technician is recommended to ensure continued accuracy.

9. Sorun Giderme

10. Özellikler

11. Garanti ve Destek

AOPUTTRIVER products are designed for reliability and performance. For warranty information or technical support, please refer to the documentation included with your purchase or contact AOPUTTRIVER customer service directly. If you have questions about the product during daily use, please contact us for assistance.