Tilswall Metal Detector LE User Manual

1. Giriş

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Tilswall Metal Detector LE. Please read this manual thoroughly before using the equipment to ensure safe and efficient operation. Proper use will enhance your metal detecting experience and prolong the life of your device.

2. Ürün Bileşenleri

The Tilswall Metal Detector LE consists of several key components designed for optimal performance and user comfort. Familiarize yourself with each part before assembly.

• Kontrol kutusu: Houses the LCD display, control buttons, and electronic circuitry.
• Ayarlanabilir Gidon: Allows for length adjustment to suit users of various heights.
• Arm Support: Provides comfort and stability during prolonged use.
• Su Geçirmez Arama Başlığı: The primary detection component, designed to be submerged in water.
• Lock Nut: Secures the search coil to the stem.
• Kablo: Connects the search coil to the control box.
• Batarya tutucu: Compartment for power source.
• LCD Ekran: Provides visual feedback on detection mode, sensitivity, battery status, and volume.
• Kulaklık girişi: Kulaklık bağlantısı için (3.5 mm).

3. Kurulum Talimatları

Follow these steps to assemble your metal detector. Ensure all connections are secure before operation.

1. Arama Bobinini Takın: Align the search coil with the lower stem and secure it using the provided screw and lock nut. Ensure the cable is routed neatly along the stem.
2. Gövdeyi birleştirin: Connect the lower stem to the middle stem, and then the middle stem to the upper stem (which includes the control box and arm support). Secure each section by twisting or locking mechanisms.
3. Gövde Uzunluğunu Ayarlayın: The stem is adjustable from 35 inches to 45 inches. Loosen the locking collar, extend or retract the stem to a comfortable length, and then tighten the collar to secure it.



4. Pilleri Takın: Open the battery compartment on the control box and insert the required batteries (not specified in product data, assume standard 9V or AA based on common detectors, but the image shows 9V batteries). Ensure correct polarity. Close the compartment securely.
5. Kabloyu bağlayın: Plug the search coil cable into the designated port on the control box.

4. Kullanım Talimatları

Your Tilswall Metal Detector LE features an intuitive LCD display and multiple detection modes for efficient treasure hunting.

4.1 Güç Açma/Kapatma

Basın GÜÇ button to turn the detector on or off. The LCD display will illuminate upon activation.

4.2 LCD Ekran Üstüview

The LCD screen provides visual indicators for:

• Algılama Modu: Indicates the currently selected mode (e.g., All Metal, DISC).
• Hassasiyet Seviyesi: Shows the current sensitivity setting. Adjust with UP/DOWN buttons.
• Pil Durumu: Kalan pil ömrünü gösterir.
• Ses Seviyesi: Ses çıkış ses seviyesini gösterir.
• Target Category Icons: Different icons represent various metal types (e.g., iron, gold, silver).
• Aşırı Yük Uyarısı: Alerts if the signal is too strong.

4.3 Algılama Modları

The detector offers two primary modes:

• Tamamen Metal Modu: Detects all types of metals.
• DİSK Modu: Allows you to discriminate against certain metal types, improving detection efficiency by filtering out unwanted targets. Use the DİSK button to cycle through discrimination settings.

4.4 Hassasiyet Ayarı

Kullanın UP Ve AŞAĞI arrow buttons (labeled SENS) to adjust the detector's sensitivity. Higher sensitivity increases detection depth but may also increase false signals in mineralized soil.

4.5 Audio Feedback

The detector provides distinctive audio tones for different metals: a low tone, a medium tone, and a high tone. This helps in identifying target types without constantly looking at the display. For private detection, connect 3.5mm headphones to the audio jack.

4.6 Search Coil Usage

The 8.5-inch waterproof search coil allows for detection in shallow water. When sweeping, keep the coil parallel to the ground and move it slowly from side to side. The detector is capable of detecting objects up to 18 cm deep.

5. Usage Tips and Best Practices

To ensure accurate detection and prevent interference, consider the following:

• Avoid Indoor Use: Do not use the device on building floors, as many contain embedded metal that can cause false readings. Large appliances indoors can also interfere with metal detectors.
• Dış Ortam: When using outdoors, avoid highly mineralized soil and areas with significant metal waste.
• Kazı Aletleri: If carrying a digging tool, keep it a short distance away from the metal detector during operation to prevent interference.
• Kontrol kutusu: Kontrol kutusu Olumsuz waterproof. Protect it from moisture and submersion.

6. Özellikler

7. Bakım

Regular maintenance ensures the longevity and optimal performance of your metal detector.

• Temizlik: After each use, wipe down the search coil and stem with a damp cloth to remove dirt and debris. Ensure the control box remains dry.
• Depolamak: Store the detector in a dry, cool place away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
• Pil Bakım: Replace batteries when the low battery indicator appears on the LCD. Always use fresh, high-quality batteries.
• Kablo Denetimi: Periodically check the search coil cable for any signs of wear or damage.

8. Sorun Giderme

If you encounter issues with your metal detector, refer to the following common problems and solutions:

• Güç Yok:
  • Pillerin doğru kutuplara göre takılıp takılmadığını kontrol edin.
  • Eski veya bitmiş pilleri yenileriyle değiştirin.
• False Signals/Erratic Behavior:
  • Reduce sensitivity using the SENS DOWN button.
  • Move to a different location, away from highly mineralized soil, large metal objects, or electrical interference.
  • Ensure the search coil cable is securely connected and not damaged.
  • Check if any personal metal items (jewelry, cell phone) are too close to the search coil.
• Algılama Yok:
  • Increase sensitivity using the SENS UP button.
  • Ensure the correct detection mode is selected (e.g., All Metal mode for general detection).
  • Verify the search coil is properly connected.
• Weak Audio Signal:
  • Ses seviyesini artırın.
  • Check headphone connection if in use.

9. Garanti ve Destek

Your Tilswall Metal Detector LE is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the warranty card included with your product or contact Tilswall customer support.

For technical assistance, troubleshooting, or any questions regarding your product, please visit the official Tilswall webweb sitesinden veya müşteri hizmetleri departmanıyla iletişime geçin. İletişim bilgileri genellikle ürün ambalajında ​​veya markanın resmi web sitesinde bulunabilir. webalan.