QiCYCLE P1 Portable Air Compressor User Manual

1. Giriş

The QiCYCLE P1 is a high-performance wireless portable air compressor designed for quick and efficient inflation of various items. Equipped with a 120W high-efficiency motor, it can reach a maximum inflation pressure of 150 PSI (10.3 bar) with an airflow of up to 32L/min. This device features a built-in 7800mAh Li-ion battery, an automatic stop function, and can also serve as a 5000mAh power bank and an emergency LED flashlight. Its robust construction ensures durability and safety.

2. Güvenlik Bilgileri

• Kullanmadan önce tüm talimatları dikkatlice okuyunuz.
• Çocukların erişemeyeceği yerde saklayınız.
• Kompresörü ıslak ortamlarda veya yanıcı sıvı veya gazların yakınında çalıştırmayın.
• Ensure the air hose is securely connected before starting inflation.
• Do not over-inflate items. Always refer to the manufacturer's recommended pressure.
• Aşırı ısınmayı önlemek için uzun süreli sürekli çalıştırmadan kaçının. Cihaz ısınırsa soğumasını bekleyin.
• Use only the provided charging cable and adapters.
• Cihazı kendiniz sökmeyin veya onarmaya çalışmayın. Yardım için müşteri desteğine başvurun.

3. Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

• 1 x QiCYCLE P1 Tire Inflator
• 1 x Air Tube (with Schrader valve)
• 1 x Presta Valf Adaptörü
• 1 x Ball Needle Adapter
• 1 x USB-C Şarj Kablosu
• 1 x Saklama Çantası
• 1 x Kullanım Kılavuzu

Image: Contents of the QiCYCLE P1 package, including the inflator, air tube, various adapters, USB-C cable, storage bag, and user manual.

4. Ürün Bittiview

Temel Özellikler:

• Hızlı Enflasyon: 120W motor, up to 150 PSI / 10.3 bar, 32L/min airflow. Inflates a 205/55 R16 tire from 0 to 2.5 bar in approximately 5 minutes and 52 seconds.
• Yüksek Kapasiteli Pil: Integrated 7800mAh (3x2600mAh) Li-ion battery for extended use. Fully charges in about 3 hours via USB-C.
• 5 Preset Modes & Automatic Stop: Includes modes for Car, Motorcycle, Bicycle, Ball, and a Manual mode. Automatically stops when the preset pressure is reached to prevent over-inflation.
• LCD Display & Real-time Monitoring: High-definition LCD shows real-time tire pressure data. Supports auto-calibration at high altitudes.
• Çok Fonksiyonlu Cihaz: Functions as a 5000mAh power bank (5V/2A USB-A output) and an emergency LED flashlight (long-duration light and SOS flashing).
• Dayanıklı Yapı: Features zinc alloy cast cylinders, heat-resistant PC shell, and a 350mm vulcanized rubber hose for enhanced durability and safety.

Resim: Dahili view of the QiCYCLE P1, highlighting the dual integrated chips for precise control and heat dissipation.

5. Kurulum

5.1 Cihazı Şarj Etme

1. Connect the provided USB-C charging cable to the charging port on the QiCYCLE P1.
2. USB-C kablosunun diğer ucunu uyumlu bir USB güç adaptörüne (dahil değildir) veya bir güç kaynağına bağlayın.
3. The battery indicator on the LCD screen will show the charging status. A full charge typically takes about 3 hours.
4. İlk kullanımdan önce cihazın tamamen şarj edilmesi tavsiye edilir.

5.2 Attaching the Air Hose and Adapters

1. Screw the air tube securely onto the inflation port at the top of the compressor.
2. For Schrader valves (common on cars, motorcycles, and some bicycles), the air tube can be directly connected.
3. For Presta valves (common on road bikes), screw the Presta valve adapter onto the Presta valve, then attach the air tube to the adapter.
4. For balls, screw the ball needle adapter onto the air tube, then insert the needle into the ball's valve.

6. Kullanım Talimatları

6.1 Açma/Kapatma

• Cihazı açmak için: Güç düğmesine basılı tutun (U) 2 saniye boyunca basılı tutun.
• Cihazı kapatmak için: Güç düğmesine basılı tutun (U) for 2 seconds. The device will also automatically power off after a period of inactivity.

6.2 Enflasyon Modunun Seçilmesi

The QiCYCLE P1 offers 5 preset inflation modes:

1. With the device powered on, press the mode button (M) to cycle through the available modes: Car, Motorcycle, Bicycle, Ball, and Manual.
2. Each mode has a default pressure range. The manual mode allows for custom pressure settings from 3-150 PSI.

Image: Display showing the 5 preset inflation modes: Car (1.8-3.5 bar), Motorcycle (1.8-3.0 bar), Bicycle (30-145 PSI), Ball (4-16 PSI), and Manual (3-150 PSI).

6.3 Hedef Basıncın Ayarlanması

• After selecting a mode, use the '+' and '-' buttons to adjust the target pressure.
• Press the 'U' button briefly to switch between pressure units (PSI, BAR, KPA).
• In Manual mode, the device remembers your last set pressure.

6.4 Enflasyonun Başlatılması ve Durdurulması

1. Remove the valve cap and securely connect the air tube to the item's valve.
2. Select the desired mode and set the target pressure.
3. Güç tuşuna baş (U) to start inflation. The real-time pressure will be displayed.
4. Hedef basınca ulaşıldığında kompresör otomatik olarak duracaktır.
5. To manually stop inflation, press the power button (U) Tekrar.
6. Carefully disconnect the air tube from the valve.

Image: Step-by-step guide for inflation: 1) Remove valve cap and connect, 2) Select mode and set pressure, 3) Press power button to start inflation.

6.5 Power Bank Fonksiyonu

• The QiCYCLE P1 can act as a 5000mAh power bank.
• Connect your mobile device or other USB-powered gadget to the USB-A output port (5V/2A) on the compressor using a compatible USB cable.
• The device will begin charging your external device.

Image: The QiCYCLE P1 being used as a power bank to charge a smartphone via its USB-A output port.

6.6 LED El Feneri Fonksiyonu

• Press the flashlight button (light bulb icon) to turn on the LED light.
• Press again to cycle through different light modes (e.g., steady light, SOS flashing).
• Press a third time to turn off the LED light.

7. Bakım

• Pil Bakım: If the device is not used for an extended period, it is recommended to recharge the battery every six months to maintain its performance and prolong its lifespan.
• Temizlik: Kompresörün dış yüzeyini yumuşak, kuru bir bezle silin. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.
• Depolamak: Store the compressor in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided storage bag to protect it from dust and damage.
• Hortum Kontrolü: Regularly inspect the air hose for any signs of wear, cracks, or damage. Replace if necessary.

8. Sorun Giderme

9. Özellikler

10. Garanti ve Destek

10.1 Garanti Bilgileri

QiCYCLE products come with a 12-month worry-free warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

10.2 Müşteri Desteği

For any questions, suggestions, or technical assistance, please do not hesitate to contact our customer service team. We offer 7x24 hour pre-sales and after-sales support.

İletişim Bilgileri:

• E-posta: support@qicycle.com
• Telefon: +86 199 2515 4063