Legrand Rotative Power Strip with LED Switch - 3 Earthed Outlets (Cordless)

giriiş

This manual provides essential information for the safe and efficient use of your Legrand Rotative Power Strip, Model 49464. This power strip features three earthed outlets, an LED indicator switch, and a unique rotating design for flexible power distribution. It is supplied without a cord and requires manual wiring.

Güvenlik Talimatları

Always disconnect the power strip from the main power supply before performing any wiring or maintenance.
Ensure that the total power consumption of connected devices does not exceed the maximum rating of 16A / 230V.
This product is designed for indoor use only. Avoid exposure to moisture, water, or extreme temperatures.
Do not open or modify the power strip. Repairs should only be performed by qualified personnel.
Çocukların erişemeyeceği yerde saklayınız.
Ensure proper grounding when wiring the power strip.

Paket İçeriği

1 x Legrand Rotative Power Strip Housing (Model 49464)

Note: Power cord and fixing screws/collars are not included and must be purchased separately.

Kurulum ve Kablolama

Kabloyu Hazırlayın: Obtain a 3G 1.5 mm² power cable of the desired length. Strip the outer insulation and individual wire insulation (Live, Neutral, Earth) according to standard electrical practices.
Konutları Açın: Carefully open the power strip housing to access the internal wiring terminals. Refer to the diagram below for guidance.
Şekil 1: Ana view of the Legrand Rotative Power Strip. This image shows the overall design with three earthed sockets and the integrated LED switch.
Kabloları Bağlayın: Connect the Live, Neutral, and Earth wires from your power cable to the corresponding terminals inside the power strip. Ensure all connections are secure and properly insulated.
Figure 2: Close-up of the earthed sockets. This image highlights the Type E sockets with their grounding pins and electrical ratings.
Konutları Kapatın: Carefully reassemble the power strip housing, ensuring no wires are pinched.
Montaj Seçenekleri: The power strip offers flexible installation:
- Bağlantısız: Place the power strip on a flat surface. The integrated feet provide stability.
- Duvara Montaj: Use appropriate screws (not supplied) to fix the power strip to a wall. The design allows for secure attachment.
- Cable Tie Mounting: Secure the power strip using cable ties (not supplied) for temporary or flexible installations.
Şekil 3: Yan view of the power strip with feet extended, illustrating its freestanding capability and potential for mounting.
Şekil 4: Ön view of the power strip with feet extended, showing the overall form factor when placed on a surface.

Kullanım Talimatları

Güce Bağlanma: Plug the wired power strip into a suitable wall outlet.
Açma/Kapatma: Use the integrated LED switch to turn the power strip on or off. The LED indicator will illuminate when the power strip is active.
Bağlantı Cihazları: Plug your electrical devices into the three earthed outlets. The sockets are oriented at 45° for standard plugs and one at 90° for larger transformers, optimizing space and preventing blockage.
Döner Tasarım: The cylindrical design allows you to rotate the power strip to orient the outlets as needed, providing flexibility for various plug types and cable management.
Retractable Sockets: When not in use, the sockets can be retracted to prevent dust accumulation.

Bakım

Temizlik: Disconnect the power strip from the main power supply before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
Denetleme: Periodically inspect the power strip and its connected cable for any signs of damage, such as frayed wires, cracks, or loose connections. If damage is found, discontinue use immediately and consult a qualified electrician.
Toz Koruması: Utilize the retractable socket feature to minimize dust accumulation when outlets are not in use.

Sorun giderme

Sorun	Olası Neden	Çözüm
Power strip does not turn on (LED off).	No power from wall outlet, faulty wiring, or internal issue.	Duvar prizinin çalışıp çalışmadığını başka bir cihaz takarak kontrol edin. Verify the internal wiring connections (if recently wired). Ensure the power strip's switch is in the "ON" position.
Devices connected are not receiving power.	Power strip is off, device is faulty, or overloaded circuit.	Ensure the power strip is switched on (LED illuminated). Cihazı doğrudan duvardaki prize takarak test edin. Reduce the number of connected devices to avoid overloading the power strip or circuit.
Overheating of the power strip.	Aşırı yüklenme, yetersiz havalandırma veya dahili arıza.	Immediately disconnect all devices and unplug the power strip. Ensure total power consumption does not exceed 16A. Place the power strip in a well-ventilated area. If overheating persists, discontinue use and seek professional assistance.

Özellikler

Özellik	Detay
Model Numarası	49464
Marka	Legrand
Mağaza Sayısı	3 (Type E, Earthed)
Cilttage	230 Volt
Maksimum Akım	16 Amporada
Özel Özellikler	Rotative design, LED indicator switch, Retractable sockets, 45°/90° oriented sockets
Malzeme	Plastik
Renk	White and Dark Grey
Kordon	Not supplied (requires 3G 1.5 mm² cable)
Akıllı Ev Uyumluluğu	HAYIR
Önerilen Kullanım	Indoor settings, workspaces
Menşei ülke	Çin

Garanti ve Destek

This Legrand product is covered by the manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Legrand webalan.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Legrand customer service through their official channels. Contact information can typically be found on the product packaging or the Legrand webalan.

Legrand Resmi Webalan: www.legrand.com

Legrand 49464