Fastrack Mens Analog-Digital Watch NR38064PP03 User Manual

giriiş

This manual provides essential instructions for the proper use, setup, and maintenance of your Fastrack Mens Analog-Digital Watch, model NR38064PP03. Please read this guide thoroughly to ensure optimal performance and longevity of your timepiece.

Kurmak

1. Başlangıç ​​Zaman Ayarı (Analog)

1. Pull the crown (button on the right side of the watch case) out to the first click position.
2. Akrep ve yelkovanı doğru zamana ayarlamak için tepeyi çevirin.
3. Analog mekanizmayı çalıştırmak için kurma kolunu normal konumuna geri itin.

2. Digital Time and Date Setting

Your watch features multiple buttons for digital display control. Refer to the watch diagram for button identification (typically labeled A, B, C, D).

1. Press the 'Mode' button (usually bottom-left) repeatedly until the time setting mode is displayed (often indicated by flashing digits).
2. Use the 'Adjust' or 'Reset' button (usually top-right or bottom-right) to select the digit you wish to change (e.g., hours, minutes, year, month, day).
3. Use the 'Start/Stop' or 'Forward' button (usually top-left) to increase the selected value.
4. Tüm ayarlar doğru yapıldıktan sonra, ayar modundan çıkmak için 'Mod' düğmesine tekrar basın.

3. Saati Takmak

Ensure the watch strap is adjusted comfortably around your wrist, allowing for slight movement without being too loose or too tight. The buckle should be securely fastened.

Figure 1: The Fastrack Analog-Digital Watch worn on a wrist, demonstrating proper fit and appearance.

Saatin Çalıştırılması

1. Understanding Watch Buttons

Your Fastrack watch typically features four buttons for various functions:

• Mod Düğmesi: Cycles through different digital display modes (Time, Alarm, Stopwatch, etc.).
• Işık Düğmesi: Düşük ışık koşullarında görünürlüğü artırmak için dijital ekranı aydınlatır.
• Başlat/Durdur Düğmesi: Used to start and stop the stopwatch, or to increment values during setting.
• Reset/Adjust Button: Used to reset the stopwatch, or to select items during setting.

Şekil 2: Ön view of the Fastrack Analog-Digital Watch, showing the analog hands and digital display. The buttons are visible on the sides of the watch case.

2. Switching Digital Modes

Press the 'Mode' button repeatedly to cycle through the available functions:

• Zaman Göstergesi: Shows current time (hours, minutes, seconds) and date.
• Alarm Modu: Alarm kurmayı ve etkinleştirmeyi sağlar.
• Kronometre Modu: Geçen süreyi ölçmek için.

3. Kronometrenin Kullanımı

1. Navigate to the Stopwatch mode using the 'Mode' button.
2. Zamanlamayı başlatmak için 'Başlat/Durdur' düğmesine basın.
3. Press the 'Start/Stop' button again to pause or stop timing.
4. Kronometreyi sıfırlamak için 'Sıfırla' düğmesine basın.

4. Suya Dayanıklılık

This watch has a water resistance depth of 30 meters (3 ATM). This means it is suitable for everyday use and can withstand splashes or brief immersion in water. It is Olumsuz suitable for swimming, showering, or diving. Do not operate buttons while the watch is wet or submerged.

Bakım

1. Saatinizi Temizleme

Wipe the watch case and strap regularly with a soft, dry cloth to remove dust and dirt. For plastic components, a slightly damp Bez kullanılabilir ve hemen kurumaya bırakılmalıdır. Kimyasal temizleyiciler veya aşındırıcı malzemeler kullanmaktan kaçının.

2. Pil Değişimi

The watch is powered by a quartz battery. When the display dims or the analog hands stop moving, it indicates a low battery. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and water resistance integrity.

3. Depolama

Saatinizi kullanmadığınız zamanlarda, doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak, serin ve kuru bir yerde saklayın. Saati güçlü manyetik alanlara maruz bırakmaktan kaçının.

Sorun giderme

• Analog ibreler hareket etmiyor: Check if the crown is pushed in completely. If it is, the battery may be depleted.
• Dijital ekran boş veya soluk: The battery may be low or depleted.
• Yanlış saat gösteriliyor: Re-adjust both analog and digital time settings as described in the 'Setup' section.
• Düğmeler tepkisiz: Ensure the watch is not wet. If the issue persists, a professional inspection may be required.

If you encounter issues not covered here, please contact Fastrack customer support or an authorized service center.

Özellikler

Figure 3: Diagram illustrating the dimensions of the Fastrack Analog-Digital Watch, including case diameter.

Garanti ve Destek

1. Garanti Bilgileri

This Fastrack watch comes with a bir yıllık garanti against manufacturing defects from the date of purchase. The warranty covers the watch movement, hands, and dial. It does not cover:

• Pil ömrü.
• Kasa, cam veya kayışın normal aşınma ve yıpranması.
• Yanlış kullanım, bakım eksikliği, kazalar veya yetkisiz onarımlar sonucu oluşan hasarlar.
• Water damage if the watch was used outside its specified water resistance limits or if the crown was operated while wet.

Şekil 4: Arka view of the Fastrack Analog-Digital Watch, displaying the model number (38064PP03) and water resistance rating (30M WR).

2. Müşteri Desteği

For warranty claims, service, or further assistance, please contact Fastrack customer support or visit an authorized Fastrack service center. Keep your purchase receipt as proof of purchase for warranty validation.