REDARC SPFP1200

REDARC 200W Monocrystalline Portable Folding Solar Panel SPFP1200 User Manual

1. Giriş

This manual provides essential information for the safe and efficient use of your REDARC 200W Monocrystalline Portable Folding Solar Panel (Model: SPFP1200). Please read these instructions carefully before setup and operation to ensure optimal performance and longevity of your solar panel. This product is designed to convert sunlight into electrical energy for charging 12V battery systems.

2. Güvenlik Bilgileri

Yaralanmaları ve ürün hasarını önlemek için aşağıdaki güvenlik önlemlerine uyun:

  • Do not attempt to disassemble, modify, or repair the solar panel. Unauthorized modifications can be dangerous and will void the warranty.
  • Güneş panelini dikkatli kullanın. Düşürmekten veya şiddetli darbelere maruz bırakmaktan kaçının.
  • Ensure all electrical connections are secure and correctly polarized before connecting to a battery or charge controller. Incorrect wiring can cause damage.
  • Do not touch exposed wires or terminals when the panel is exposed to sunlight, as it will generate electricity.
  • Keep the solar panel away from open flames, flammable gases, and liquids.
  • Always use an appropriate solar charge controller between the solar panel and the battery to prevent overcharging and reverse current flow.
  • Çalışma sırasında çocukları ve evcil hayvanları güneş panelinden uzak tutun.

3. Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

  • REDARC 200W Monocrystalline Portable Folding Solar Panel
  • Entegre ayarlanabilir destek ayakları
  • Connection cables (typically with Anderson-style plugs or similar)
  • Kullanım Kılavuzu (bu belge)

4. Kurulum

Follow these steps to set up your portable folding solar panel:

  1. Paneli açın: Carefully unfold the solar panel sections on a flat, stable surface.
  2. Bacakları doğru pozisyona getirin: Extend and lock the integrated adjustable support legs to prop up the panel. Ensure the legs are stable and can support the panel's weight.
  3. Angle Towards the Sun: Adjust the angle of the panel using the support legs to face directly towards the sun for maximum efficiency. The optimal angle will vary depending on your location and the time of day.
  4. Connect to Charge Controller: Connect the solar panel's output cable to the input terminals of a compatible solar charge controller. Ensure correct polarity (positive to positive, negative to negative).
  5. Aküye Bağlan: Connect the output terminals of the solar charge controller to your 12V battery system. Always connect the charge controller to the battery önce connecting it to the solar panel.

Image: REDARC 200W Monocrystalline Portable Folding Solar Panel in deployed state.

REDARC 200W Monocrystalline Portable Folding Solar Panel deployed with adjustable legs

This image shows the REDARC 200W Monocrystalline Portable Folding Solar Panel unfolded and set up with its adjustable legs, ready for sun exposure. The panel's dark, reflective surface indicates its monocrystalline cells, and the sturdy frame is visible.

5. Çalıştırma

Once set up, the solar panel will begin generating power when exposed to sunlight. The charge controller will regulate the power flow to your battery.

  • Monitör Şarjı: Observe the indicators on your solar charge controller to confirm that the battery is charging correctly.
  • Adjust for Sun: For best results, periodically adjust the panel's angle throughout the day to follow the sun's path.
  • Çevresel Faktörler: Cloud cover, shade, and dust on the panel will reduce power output.

Bu kılavuza eklenebilecek, satıcıya ait resmi ürün videosu bulunamadı.

6. Bakım

Regular maintenance ensures optimal performance and extends the lifespan of your solar panel:

  • Temizlik: Clean the surface of the solar panel regularly with a soft, damp cloth to remove dust, dirt, and debris. Avoid abrasive cleaners or harsh chemicals.
  • Bağlantıları Denetle: Periodically check all electrical connections for corrosion, looseness, or damage. Ensure they are clean and secure.
  • Depolamak: When not in use, fold the solar panel and store it in a dry, cool place, away from direct sunlight and extreme temperatures. Use the provided carrying case if available.
  • Fiziksel Muayene: Her kullanımdan önce ve sonra panelde camda veya çerçevede çatlak gibi fiziksel hasar olup olmadığını kontrol edin.

7. Sorun Giderme

If you encounter issues with your solar panel, refer to the table below for common problems and solutions:

SorunOlası NedenÇözüm
Panelden güç çıkışı yok.No sunlight, panel in shade, dirty panel surface, faulty connection.Move panel to direct sunlight, remove any shading, clean panel surface, check all connections.
Düşük güç çıkışıPartial shading, incorrect panel angle, cloudy weather, dirty panel, undersized charge controller.Ensure full sun exposure, adjust panel angle, clean panel, verify charge controller is rated for 200W.
Pil şarj olmuyorCharge controller fault, incorrect wiring, battery fault, insufficient solar input.Check charge controller status, verify wiring polarity, test battery, ensure adequate sunlight.
Panel hasarlı görünüyor.Physical impact, improper handling.Discontinue use. Contact REDARC support for assistance. Do not attempt repairs.

8. Özellikler

Key technical specifications for the REDARC 200W Monocrystalline Portable Folding Solar Panel SPFP1200:

ŞartnameDeğer
MarkaRedarc
Model NumarasıSPFP1200
Maksimum Güç200 Watt
MalzemeMonokristalin
YeterlikYüksek Verimlilik
Ürün Ağırlığı24.2 pound (10.98 kg)
Ürün Ölçüleri (Katlanmış)Yaklaşık 34.6 x 30.9 x 3.7 inç (87.9 x 78.5 x 9.4 cm)
StilAyarlanabilir, Taşınabilir
ÜreticiREDARC Elektronik

9. Garanti ve Destek

REDARC products are manufactured to high standards and come with a manufacturer's warranty. Specific warranty terms and conditions, including duration and coverage, are typically provided with your purchase documentation or can be found on the official REDARC webLütfen garanti talepleriniz için satın alma belgenizi saklayın.

For technical support, warranty inquiries, or service, please contact REDARC customer service directly. Refer to the REDARC webEn güncel iletişim bilgileri ve destek kaynakları için siteyi ziyaret edin.

İlgili Belgeler - SPFP1200

Önview Sabit Monokristalin Güneş Panelleri için REDARC ABS Montajlarının Kurulumu
Karavan ve teknelere sabit monokristal güneş panelleri için REDARC ABS montajlarının delme işlemine gerek kalmadan nasıl monte edileceğine dair bir kılavuz. SMI9001, SMI9002, SMI9003 ve SMI9007 modellerini kapsar.
Önview REDARC 12V ila 24V Tek Devre Voltajtage Güçlendiriciler: VI180D, VI360D, VI720D Kullanım Kılavuzu
Bu belge, REDARC'ın VI Serisi 12V ila 24V Tek Devre Voltaj Regülatörleri için ayrıntılı teknik özellikler, özellikler, kurulum kılavuzu ve garanti bilgileri sağlar.tagVI180D, VI360D ve VI720D modelleri dahil olmak üzere e Booster'lar.
Önview REDARC Monokristalin Güneş Panelleri: SMSP1050-SMSP1200 Modelleri - Kurulum ve Güvenlik Kılavuzu
REDARC'ın Monokristalin Güneş Panelleri (SMSP1050, SMSP1080, SMSP1120, SMSP1180, SMSP1200) hakkında kapsamlı rehber; karavan ve karavan uygulamaları için teknik özellikler, güvenlik, kurulum, kablolama ve garanti bilgilerini kapsar.
Önview REDARC Monokristalin Güneş Panelleri: Kurulum, Özellikler ve Güvenlik Kılavuzu
REDARC Monokristalin Güneş Panelleri (SMSP1050-SMSP1200) için kapsamlı rehber; özellikleri, ayrıntılı teknik özellikleri, kurulum talimatlarını, kablolama şemalarını, güvenlik önlemlerini ve garanti bilgilerini kapsar.
Önview REDARC ALPHA R 50A için GPC Montaj Kiti - INEOS GRENADIER Kurulum Kılavuzu
REDARC ALPHA R 50A çift akü sistemi için GPC montaj kitinin, özellikle INEOS GRENADIER aracı için hazırlanmış ayrıntılı kurulum kılavuzu. Adım adım talimatlar, güvenlik uyarıları ve devreye alma ayrıntılarını içerir.
Önview REDARC BCDC ALPHA 100R: Bluetooth'lu 12V 100A DC-DC Akü Şarj Cihazı Kurulum Kılavuzu
Akıllı akü izleme ve Bluetooth bağlantısı özelliklerine sahip 12V 100A DC-DC akü şarj cihazı REDARC BCDC ALPHA 100R'yi keşfedin. Bu kılavuz, optimum araç güç yönetimi için kurulum, yapılandırma ve çalışma ayrıntılarını içerir.