TELEVES Avant X Basic Programmable Headend

1. Giriş

The TELEVES Avant X Basic is a programmable multi-input headend designed for terrestrial TV installations, suitable for single or multi-dwelling units. It features 32 programmable digital filters across 4 VHF+UHF (DTT) inputs. The unit has 5 inputs, configurable for two distribution modes: FM-4xVHF/UHF or FM-DAB-3xUHF. It allows for precise adjustment of amplification and equalization for various RF inputs. Programming is simplified via the ASuite application (Android or Windows). The device includes automatic LTE filtering, detecting and cutting frequencies from channel 48 (LTE700). It is RED compliant.

2. Güvenlik Bilgileri

• Kurulum ve çalıştırmadan önce tüm talimatları dikkatlice okuyun.
• Cihazı yağmura, neme veya aşırı sıcaklıklara maruz bırakmayın.
• Aşırı ısınmayı önlemek için yeterli havalandırmayı sağlayın.
• Only use the provided power supply or a compatible alternative specified by TELEVES.
• Herhangi bir bağlantı yapmadan veya bakım işlemi gerçekleştirmeden önce gücü kesin.
• Installation should be performed by qualified personnel to ensure safety and optimal performance.

3. Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

• TELEVES Avant X Basic Programmable Headend Unit (Model 532103)
• Güç kablosu
• Kullanım Kılavuzu (bu belge)
• Montaj Aksesuarları (eğer varsa)

4. Ürün Bittiview

Şekil 1: Ön view of the TELEVES Avant X Basic Programmable Headend. This image displays the unit's casing, indicating the various input and output connectors for signal management.

Temel Özellikler:

• 5 Inputs: Configurable for FM-4xVHF/UHF or FM-DAB-3xUHF distribution modes.
• 32 Digital Filters: Programmable for precise signal selection and amplifikasyon.
• Automatic Gain Control (AGC): Ensures stable output levels.
• LTE Filtering: Automatic detection and suppression of LTE700 (Channel 48) interference.
• ASuite Compatibility: Easy programming via Android or Windows application.
• RED Compliant: Meets European regulatory standards.

Giriş/Çıkış Bağlantı Noktaları:

• Girişler: 5 (e.g., 1x FM, 4x VHF/UHF or 1x FM, 1x DAB, 3x UHF)
• Çıktılar: 1 (Main RF Output)
• Programlama Bağlantı Noktası: For connection with ASuite application.

5. Kurulum ve Kurulum

5.1 Ünitenin Montajı

1. Choose a dry, well-ventilated location, away from direct sunlight and heat sources.
2. Mount the unit securely to a wall or suitable surface using appropriate fasteners. Ensure sufficient space around the unit for cable connections and heat dissipation.

5.2 Antenlerin ve Kabloların Bağlanması

1. Connect your terrestrial antennas (FM, DAB, VHF, UHF) to the corresponding input ports on the Avant X Basic unit.
2. Connect the main RF output of the Avant X Basic to your distribution network or directly to the first amplifier/splitter in your system.
3. Ensure all F-connectors are securely tightened to prevent signal loss.

5.3 Güç Bağlantısı

1. Connect the power cable to the unit's power input.
2. Plug the power cable into a suitable electrical outlet (220-230 Vac).
3. The unit will power on, and indicators will illuminate.

6. Kullanım Talimatları

6.1 Initial Configuration and Programming

The TELEVES Avant X Basic is programmed using the ASuite application, available for Android devices and Windows computers.

1. Download and install the ASuite application from the official TELEVES websitenize veya cihazınızın uygulama mağazasına gidin.
2. Connect your programming device (smartphone/tablet via Bluetooth or PC via USB) to the Avant X Basic unit.
3. Launch the ASuite application. The application will guide you through the process of scanning available terrestrial signals and configuring the digital filters.
4. Filter Programming: Program up to 32 digital filters to select and amplify specific channels from your VHF+UHF inputs.
5. Giriş Yapılandırması: Select the desired distribution mode (FM-4xVHF/UHF or FM-DAB-3xUHF) based on your antenna setup.
6. Gain and Equalization: Ayarla amplification and equalization levels for each input to optimize signal quality and balance output levels. The unit features Automatic Gain Control (AGC) for stable output. Manual adjustments can be made within a specified range.
7. LTE Filtering: The unit automatically detects and filters LTE700 signals (Channel 48 and above) to prevent interference with DTT signals. No manual configuration is typically required for this feature.
8. Save your configuration to the device once programming is complete.

6.2 İzleme İşlemi

After programming, the unit will continuously process and amplify the selected signals. You can use the ASuite application to monitor signal levels and device status if needed.

7. Bakım

• Temizlik: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or abrasive materials.
• Havalandırma: Aşırı ısınmayı önlemek için havalandırma açıklıklarının kapalı olmadığından emin olun.
• Donanım Yazılımı Güncellemeleri: Periodically check the TELEVES website for firmware updates for the Avant X Basic unit and the ASuite application to ensure optimal performance and access to new features.

8. Sorun Giderme

9. Teknik Özellikler

10. Garanti ve Destek

For warranty information, please refer to the documentation provided with your purchase or visit the official TELEVES webalan.

For technical support, product inquiries, or service, please contact TELEVES customer support through their official channels.

• Resmi Webalan: www.televes.com
• İletişim Bilgileri: Refer to the "Contact Us" section on the TELEVES webBölgesel destek detayları için site.