Yaheetech Ayarlanabilir PU Deri Döner Bar Tabureleri (2'lü Set) Kullanım Kılavuzu

giriiş

Thank you for choosing Yaheetech Adjustable PU Leather Swivel Bar Stools. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new bar stools. Please read these instructions carefully before use and retain them for future reference.

Önemli Güvenlik Bilgileri

UYARI: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) and Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov/furniture.

Montajdan önce tüm parçaların mevcut ve hasarsız olduğundan emin olun.
Do not use the product if any part is missing, damaged, or worn.
Do not stand on the bar stool.
Maksimum 330 pound (150 kg) ağırlık kapasitesini aşmayın.
Montaj sırasında çocukları üründen uzak tutun.
Her zaman düz ve sağlam bir zemin üzerinde kullanın.

Paket İçeriği

Your Yaheetech Bar Stools package should contain the following components for a set of 2 stools:

2 x Seat Cushions with Backrest (PU Leather)
2 x Gas Lift Cylinders (SGS-certified)
2 x Footrests (Chrome-plated metal)
2 x Base Plates (Electroplated metal with anti-slip rubber ring)
Montaj Donanımı (vidalar, Allen anahtarı)
Kullanım Kılavuzu

Kurulum (Montaj Talimatları)

Assembly is quick and easy, typically taking less than 10 minutes per chair. Follow these steps:

Bileşenleri Paketinden Çıkarın: Tüm parçaları ambalajından dikkatlice çıkarın ve çizilmeleri önlemek için temiz ve yumuşak bir yüzeye serin.
Attach Footrest to Gas Lift: Slide the footrest ring onto the gas lift cylinder. Ensure it is securely positioned.
Insert Gas Lift into Base: Place the wider end of the gas lift cylinder into the center hole of the base plate. The anti-slip rubber ring on the base should be facing down.
Koltuğu gazlı kaldırma mekanizmasına takın: Align the mounting plate on the underside of the seat cushion with the top of the gas lift cylinder. Secure the seat to the gas lift using the provided screws and Allen wrench. Ensure all screws are tightened firmly.
Repeat for Second Stool: Follow steps 1-4 to assemble the second bar stool.

Two assembled red Yaheetech bar stools next to a small round table. — Image: Two fully assembled Yaheetech bar stools in red, showcasing their modern design and chrome bases.

Two red Yaheetech bar stools positioned at a kitchen counter. — Image: Yaheetech bar stools in a kitchen setting, demonstrating their suitability for counter height use.

Kullanım Talimatları

Yükseklik Ayarı: To adjust the seat height, locate the lever under the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up and pull the lever up. The gas lift system allows for smooth height adjustments.
Döner Fonksiyon: The bar stools feature a 360-degree swivel function, allowing for easy rotation without moving the base.
Ayak dayama yeri: Utilize the built-in footrest for added comfort and support while seated.

Close-up of the Yaheetech bar stool's gas lift, wide metal base with rubber ring, and built-in footrest. — Resim: Ayrıntılı view of the secure gas lift mechanism, the wide 16-inch diameter metal base with its anti-slip rubber ring, and the integrated footrest, highlighting key functional components.

Bakım

Temizlik: Wipe the PU leather and metal surfaces with a damp Kumaşa zarar verebilecek sert kimyasallar veya aşındırıcı temizleyiciler kullanmaktan kaçının.
Düzenli Kontroller: Tüm vidaları ve bağlantıları düzenli olarak kontrol ederek sıkı olduklarından emin olun. Gerekirse tekrar sıkın.
Zemin Koruması: The base includes an anti-slip rubber ring to protect your floors. Ensure this ring is clean and intact.

Three images showing the high-density foam seat, water-resistant surface, and chic biscuit tufting of the Yaheetech bar stool. — Resim: Yakın çekim views illustrating the high-density foam seat for comfort, the water-resistant PU leather surface, and the stylish biscuit tufting design.

Sorun giderme

Tabure Sallanıyor: Check that all assembly screws are securely tightened. Ensure the base is on a flat, even surface.
Yükseklik Ayarı Çalışmıyor: Verify that the gas lift lever is functioning correctly and not obstructed. Ensure the gas lift cylinder is properly seated in both the base and the seat mechanism.
Gıcırdama Sesi: Apply a small amount of silicone lubricant to moving parts, such as the swivel mechanism or gas lift, if squeaking occurs.

Özellikler

Ürün Boyutları	19.5"D x 17"G x 36.5"Y
Renk	Kırmızı
Marka	Yaheetech
Boyut	2'lü set
Stil	Modern
Oturma Yüksekliği	Adjustable from 21.7 Inches
Koltuk Genişliği	17 inç
Maksimum Ağırlık Önerisi	330 Pound (150 kg)
Çerçeve Malzemesi	Metal
Koltuk Malzeme Türü	Suni Deri (PU Deri)
Montaj Gerekli	Evet
Ürün Ağırlığı (her tabure için)	Approximately 15.75 pounds (31.5 pounds for set of 2)

Diagram showing detailed dimensions of the Yaheetech bar stool, including height, width, and depth. — Image: Technical drawing with key dimensions of the bar stool, including seat height range (25-33.3 inches), seat width (17 inches), and overall height (36.5-44.5 inches).

Garanti Bilgileri

Yaheetech products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included in your package or contact Yaheetech customer support.

Müşteri Desteği

If you have any questions, concerns, or require assistance with your Yaheetech bar stools, please contact our customer support team. Contact information can typically be found on our official websitede veya ürün ambalajında yer almamaktadır.

Yaheetech Adjustable PU Leather Swivel Barstools