Eibach Pro-Spacer Wheel Spacer Instruction Manual

giriiş

The Eibach Pro-Spacer is designed to enhance vehicle aesthetics and handling by increasing track width. This product, when installed, positions the wheels further out, filling the wheel arches for a wider stance and improved stability. It is manufactured from high-tensile strength aluminum alloy, ensuring precise fitment and exceptional wheel balance.

This manual provides essential information for the correct installation, operation, and maintenance of your Eibach Pro-Spacer. Please read all instructions carefully before proceeding with installation or use.

Güvenlik Bilgileri

WARNING: Improper installation or use of wheel spacers can lead to serious injury or vehicle damage. Always follow manufacturer's instructions and consult a qualified mechanic if unsure.

• Ensure all components are clean and free from debris before installation.
• Use appropriate tools and torque specifications.
• Regularly inspect wheel spacers and lug nuts for tightness and wear.
• Do not exceed the recommended torque values.
• Ensure sufficient thread engagement for lug nuts after spacer installation.

Kutuda Neler Var?

Your Eibach Pro-Spacer package should contain the following items:

• Pro-Spacer(s)
• Appropriate lug nuts/bolts (if included with your specific kit)
• Kullanım kılavuzu (bu belge)

Image 1: Contents of the Eibach Pro-Spacer kit, including the spacers, lug nuts, and packaging.

Kurulum ve Yükleme

This section outlines the general steps for installing Eibach Pro-Spacers. Specific vehicle requirements may vary. Always refer to your vehicle's service manual for wheel and lug nut torque specifications.

1. Aracı Hazırlayın: Park the vehicle on a level, stable surface. Engage the parking brake. Loosen the lug nuts on the wheel(s) to be fitted with spacers.
2. Kaldır ve Sabitle: Safely lift the vehicle using a jack and support it with jack stands. Remove the lug nuts and then the wheel.
3. Montaj Yüzeylerini Temizleyin: Thoroughly clean the vehicle's hub mounting surface and the back of the wheel spacer. Ensure there is no rust, dirt, or debris that could prevent flush contact.
4. Ara parçayı takın: Place the Eibach Pro-Spacer onto the vehicle's hub. Ensure it sits flush against the hub.
5. Secure Spacer (if applicable): If your spacer system requires it, use the provided hardware to secure the spacer to the vehicle's hub. Torque these bolts to the manufacturer's specifications.
6. Tekerleği Takın: Place the wheel onto the installed spacer. Ensure the wheel sits flush against the spacer.
7. Install Lug Nuts/Bolts: Install the new, longer lug nuts/bolts (if provided or required) or the original lug nuts/bolts (if using a hub-centric spacer that uses existing studs). Hand-tighten them.
8. Aracı İndir: Carefully lower the vehicle until the wheel just touches the ground, but the full weight is not yet on the wheel.
9. Torque Lug Nuts/Bolts: Using a torque wrench, tighten the lug nuts/bolts in a star pattern to the vehicle manufacturer's specified torque. Do not overtighten.
10. Final Lowering: Fully lower the vehicle and remove the jack and jack stands.
11. Tekrarlamak: Repeat the process for all wheels where spacers are to be installed.

Resim 2: Ayrıntılı view of the Eibach Pro-Spacer and accompanying lug nuts, highlighting the product's design.

Operation and Driving Considerations

Once installed, Eibach Pro-Spacers are designed to integrate seamlessly with your vehicle's wheel system. While they improve handling and appearance, it's important to be aware of the following:

• İlk Kontrol: After driving the first 50-100 kilometers (30-60 miles), re-check the torque of all lug nuts/bolts. This is crucial as components can settle.
• Handling Changes: Widening the track width can alter the vehicle's handling characteristics. Drive cautiously until you are accustomed to the changes.
• Gümrükleme: Ensure there is adequate clearance between the tire/wheel and fender, suspension components, and brake lines, especially during full steering lock and suspension compression.
• Yasal Uyumluluk: Verify that the use of wheel spacers complies with local traffic laws and regulations.

Bakım

Regular inspection and maintenance are vital for the safe and reliable operation of your Eibach Pro-Spacers.

• Periodic Torque Check: Re-check the torque of the lug nuts/bolts at regular service intervals (e.g., every 5,000-10,000 km or 3,000-6,000 miles) or whenever wheels are removed and reinstalled.
• Görsel Muayene: Periodically inspect the spacers for any signs of damage, cracks, corrosion, or deformation. If any damage is observed, replace the spacer immediately.
• Temizlik: Keep the spacers and mounting surfaces clean to prevent corrosion and ensure proper fitment.

Sorun giderme

If you encounter issues after installing your Eibach Pro-Spacers, consider the following:

If troubleshooting steps do not resolve the issue, discontinue use and consult a qualified automotive technician.

Özellikler

• Modeli: S90-6-10-032-N-B
• Üretici: Eibach
• Malzeme: High-tensile strength aluminum alloy
• Ürün Ağırlığı: 1.28 Kilogram
• Ürün Ölçüleri (U x G x Y): 18.3x18.3x10 cm
• Parça Numarası: S90-6-10-032-N-B
• ASIN: B08TK2JDXW
• Temel Özellik: 114,3/5-64-160-1450 black (This appears to be a specific fitment code, likely bolt pattern, center bore, etc.)

Garanti Bilgileri

Eibach products are manufactured to high standards. For specific warranty terms and conditions, please refer to the official Eibach website or contact Eibach customer service directly. Keep your proof of purchase for any warranty claims.

Müşteri Desteği

For technical assistance, installation questions, or product inquiries, please contact Eibach customer support:

• Webalan: www.eibach.com (Please check the official Eibach web(Bölgesel iletişim bilgileri için site.)
• E-posta/Telefon: yetkiliye başvurun webEn güncel iletişim bilgileri için sitemizi ziyaret edin.