giriiş
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your BASETBL Ergonomic Office Chair. Please read this manual thoroughly before assembly and use to ensure proper function and safety.
Güvenlik Bilgileri
- Montajdan önce tüm parçaların mevcut ve hasarsız olduğundan emin olun.
- Do not overtighten screws during assembly, especially for armrests. Tighten all screws only after all components are in place.
- Sandalyenin üzerine çıkmayın.
- Sandalyenin herhangi bir parçası eksik, hasarlı veya aşınmışsa kullanmayın.
- Çocukları toplanma alanından uzak tutun.
- Maksimum ağırlık kapasitesi: 150 kg (330 lbs).
Paket İçeriği
Verify all components are included before beginning assembly.
| Bileşen | Miktar |
|---|---|
| arkalık | 1 |
| Koltuk Minderi | 1 |
| Kolçaklar | 2 |
| Gaz Kaldırma Silindiri | 1 |
| Yıldız Tabanı | 1 |
| Tekerlekler | 5 |
| Mekanizma Plakası | 1 |
| Vidalar ve Araçlar | 1 takım |
Image: All main components of the BASETBL office chair laid out, including the backrest, seat cushion, armrests, gas lift, five-star base, and casters, along with the assembly tools.
Kurulum ve Montaj
Follow these steps carefully for proper assembly. All necessary tools and detailed instructions are included.
- Attach the mechanism plate to the bottom of the seat cushion using the provided screws. Ensure the front of the mechanism aligns with the front of the seat.
- Kolçakları oturma minderine takın. Important: Do not fully tighten the screws for the armrests at this stage.
- Insert the casters into the holes at the end of each leg of the star base. Push firmly until they click into place.
- Gaz kaldırma silindirini yıldız tabanının orta deliğine yerleştirin.
- Carefully place the assembled seat and armrest onto the gas lift cylinder.
- Attach the backrest to the seat and armrests.
- Once all components are in place, tighten all screws, especially those for the armrests, to secure the chair.
Installation Tip: Don't tighten the screws while installing the armrests. Assemble all components first, then tighten all screws at the end.
Kullanım Talimatları
Yükseklik Ayarı
To adjust the chair height, pull the lever located under the seat upwards while applying or releasinVücut ağırlığının g'si. İstenilen yükseklikte kolu bırakın.
Eğim İşlevi
The chair features a 90-110° tilt function. Pull the lever outwards to unlock the tilt mechanism, allowing the chair to recline. Push the lever inwards to lock the chair in an upright position.
Image: Visual representation of the chair's adjustable tilt range (90-110 degrees) and the location of the height and tilt tension adjustment levers.
Image: Icons depicting the synchromechanics of the chair, including controls for tilting tension, locking/unlocking the tilt, and height adjustment.
Ergonomik Destek
The chair is designed with an S-shaped ergonomic curve to fit the spine's natural curve, providing all-day support for the neck, lumbar, and thickened leg support.
Image: A skeletal diagram overlaid with the chair's profile, demonstrating how the S-shaped ergonomic design supports the neck, lumbar region, and provides thickened leg support for optimal posture.
Bakım
- Regularly check all screws and bolts to ensure they are tight. Retighten as necessary.
- Clean the PU leather and mesh fabric surfaces with a soft, damp Bez. Sert kimyasallardan veya aşındırıcı temizleyicilerden kaçının.
- Periodically inspect casters for debris (hair, dust) and clean them to ensure smooth rotation.
- Malzemenin bozulmasını önlemek için sandalyeyi doğrudan güneş ışığına veya aşırı sıcaklıklara maruz bırakmaktan kaçının.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Sandalye sallanıyor veya dengesiz. | Gevşek vidalar | Check and tighten all assembly screws, especially those connecting the seat, backrest, and armrests. |
| Sandalyenin yüksekliği ayarlanmıyor. | Gas lift issue or lever malfunction | Ensure the height adjustment lever is fully engaged. If the problem persists, the gas lift may need replacement. |
| Chair does not tilt or lock | Tilt mechanism locked or tension too high | Pull the tilt lever outwards to unlock. Adjust the tilt tension knob (if present) to a lower setting. |
| Tekerlekler düzgün bir şekilde dönmüyor | Debris in casters or damaged casters | Tekerleklerin üzerindeki saç veya kalıntıları temizleyin. Hasarlıysa tekerlekleri değiştirin. |
| Gıcırtı sesleri | Loose connections or friction | Tighten all screws. Apply a small amount of silicone spray to moving parts if necessary, avoiding contact with upholstery. |
Özellikler
- Modeli: UKCHAF003B
- Renk: Siyah
- Ürün Ölçüleri: 67 x 67 x 118.11 cm (Derinlik x Genişlik x Yükseklik)
- Ürün Ağırlığı: 13.7 kilo
- Maksimum Yük Kapasitesi: 150 kg (330 lbs)
- Koltuk Yüksekliği Aralığı: 46-56 cm (from floor)
- Birincil Malzeme: Faux Leather (PU leather), Breathable Mesh Fabric, High-density Foam
- Çerçeve Malzemesi: Alaşımlı Çelik
- Gaz Kaldırma: SGS-certified 3-level gas lift
- Temel: Durable metal 5-star base, 1,136 kg static load tested
- Tekerlekler: 360° PU silent casters
- Montaj Gerekli: Evet
- Garanti: 1 yıl üretici garantisi
Image: Technical drawing with detailed dimensions of the BASETBL office chair, including overall height (108-118cm), seat height (46-56cm), seat width (52cm), and overall depth (67cm).
Image: A diagram illustrating the key dimensions and recommended weight capacity (150KG / 330LBS) for the Basetbl F003 chair, along with a recommended user height of up to 189CM.
Image: A series of icons and images highlighting the chair's robust components and features, including SGS certified gas lifts, BIFMA tested chassis, sturdy metal legs, controls for height and tilt, and noiseless casters.
Garanti ve Destek
Your BASETBL Office Chair comes with a 1 yıllık üretici garantisi. Additionally, enjoy peace of mind with our 30-day return and exchange policy, plus free part replacements within 2 years.
For any after-sales issues or support, please go to your Amazon account:
- "Siparişleriniz" bölümüne gidin.
- Find the order ID for your BASETBL Office Chair.
- Click on "Contact the Seller".
We aim to provide an efficient and professional solution within 24 hours.
About BASETBL
BASETBL is dedicated to researching and delivering exceptionally comfortable, high-quality ergonomic office chairs. With expertise in ergonomics, we seamlessly integrate intricate details, combining elements of environment, health, and fashion in our designs.
Image: Infographic detailing BASETBL's history and achievements, including 22 years focusing on ergonomic chairs, over 10 million global users, 1587 R&D patents, and 108 patents related to lumbar spine support.
Image: Visual representation of BASETBL's design awards, including the Red Dot Award 2018, iF Design Award 2018, and German Design Award.
Image: A laboratory scene with a technician, symbolizing BASETBL's dedication to rigorous testing and quality control in their own lab.