BONTEC MD04

BONTEC MD04 Sit-Stand Desk Converter Instruction Manual

1. Giriş

Thank you for choosing the BONTEC MD04 Sit-Stand Desk Converter. This product is designed to transform your existing desk into an ergonomic sit-stand workstation, promoting better posture and reducing strain during long working hours. Its two-tier design provides ample space for monitors, keyboards, and mice, while the gas spring mechanism allows for smooth and effortless height adjustments.

This manual provides essential information for the safe and efficient use of your desk converter. Please read it thoroughly before assembly and operation, and retain it for future reference.

2. Güvenlik Bilgileri

Always ensure the desk converter is placed correctly on a stable and level surface. Do not exceed the maximum load capacity of 15 kg (33 lbs) to maintain stability and prevent accidents. Keep the work area clear of obstructions to avoid tripping hazards when adjusting the height. Ensure all cables are managed to prevent entanglement during height transitions. Avoid placing hands or fingers near moving parts during adjustment.

3. Paket İçeriği

Montaj işlemine başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

  • BONTEC MD04 Sit-Stand Desk Converter (Main Unit)
  • Klavye Tepsisi
  • Two adhesive cable management clips
  • Assembly Tools (if required, minimal assembly is needed)

4. Kurulum

The BONTEC MD04 desk converter requires minimal assembly. Follow these steps to set up your workstation:

  1. Tüm bileşenleri dikkatlice ambalajından çıkarın.
  2. Place the main unit of the desk converter on your existing desk in the desired position.
  3. Attach the keyboard tray to the designated slots on the main unit. Ensure it is securely fastened.
  4. Organize your monitors, keyboard, and mouse on the respective platforms.
  5. Use the provided adhesive cable management clips to secure any loose cables, maintaining a tidy workspace.
Diagram showing four steps for easy assembly of the BONTEC sit-stand desk converter.
Figure 4.1: Easy and fast assembly process. Simply unbox, place the main unit, attach the keyboard tray, and arrange your setup.

5. Kullanım Talimatları

The BONTEC MD04 features a gas spring mechanism for smooth height adjustment. This allows you to effortlessly switch between sitting and standing positions.

5.1 Yüksekliğin Ayarlanması

  1. To raise the workstation, gently squeeze the levers located on both sides of the upper platform.
  2. While holding the levers, guide the platform upwards to your desired standing height. Release the levers to lock the platform in place.
  3. To lower the workstation, gently squeeze the levers again. Apply slight downward pressure to guide the platform to your desired sitting height. Release the levers to lock it.

The height can be adjusted freely between 115 mm (4.5 inches) and 505 mm (19.9 inches).

Taraf view diagram illustrating the minimum and maximum adjustable heights of the desk converter.
Figure 5.1: The desk converter offers a height range from 115mm (min) to 505mm (max) for personalized ergonomic settings.
Diagram showing a person working in sitting and standing positions with the desk converter, highlighting ergonomic benefits.
Figure 5.2: Transitioning between sitting and standing positions helps improve posture and reduce discomfort.

6. Bakım

To ensure the longevity and optimal performance of your BONTEC MD04 Sit-Stand Desk Converter, follow these simple maintenance guidelines:

  • Temizlik: Yüzeyleri reklamla silinamp Bez kullanın. Yüzeye zarar verebileceğinden sert kimyasallar veya aşındırıcı temizleyiciler kullanmaktan kaçının.
  • Denetleme: Tüm vidaları ve bağlantıları düzenli olarak kontrol ederek sıkı olduklarından emin olun. Gerekirse tekrar sıkın.
  • Gazlı Yay: The gas spring mechanism is designed for maintenance-free operation. Do not attempt to lubricate or disassemble it.

7. Sorun Giderme

If you encounter any issues with your BONTEC MD04 Sit-Stand Desk Converter, please refer to the following common troubleshooting tips:

  • Yüksekliği ayarlamakta zorluk: Ensure that the levers on both sides are fully squeezed. Check that the weight on the desk converter does not exceed the maximum capacity of 15 kg (33 lbs).
  • Sallanma veya Kararsızlık: Verify that the desk converter is placed on a flat, stable surface. Check all assembly connections to ensure they are tight. Ensure the weight is evenly distributed on the platforms.
  • Noise During Adjustment: A slight sound during adjustment is normal due to the gas spring mechanism. If the noise is excessive or unusual, ensure no parts are rubbing against each other or that the unit is not overloaded.

Bu çözümleri denedikten sonra sorun devam ederse lütfen müşteri desteğiyle iletişime geçin.

8. Özellikler

ÖzellikŞartname
Model NumarasıMD04
MarkaBONTEK
Ürün Boyutları (D x G x Y)41 x 80 x 50.5 cm (16.1 x 31.5 x 19.9 inç)
Top Platform Dimensions800 x 400 mm (31.5 x 15.7 inç)
Minimum Yükseklik11.5 cm (4.5 inç)
Maksimum Yükseklik50.5 cm (19.9 inç)
Ağırlık Kapasitesi15 kg (33 lbs)
MalzemeMühendislik ürünü ahşap (üst kısım), alaşımlı çelik (taban)
RenkSiyah
Özel ÖzelliklerAdjustable, Ergonomic, Gas Spring Mechanism, Pre-drilled grommet hole for monitor mounts
Montaj GerekliEn az
Diagram illustrating the dimensions of the BONTEC sit-stand desk converter, including width, depth, and height ranges.
Figure 8.1: Detailed dimensions and weight capacity of the desk converter.
Diagram highlighting safety features of the desk converter, including gas spring, non-slip pads, and rounded corners.
Figure 8.2: Safety design elements such as concealed safety locks, safe round corner design, non-slip pads, and the gas spring mechanism.

9. Garanti

The BONTEC MD04 Sit-Stand Desk Converter comes with a Limited Warranty. This warranty covers manufacturing defects in materials and workmanship under normal use. Please refer to the product packaging or contact BONTEC customer support for specific terms and conditions of your warranty.

10. Destek

For further assistance, technical support, or warranty claims, please contact BONTEC customer service through the retailer where you purchased the product or visit the official BONTEC website. Please have your model number (MD04) and purchase information ready when contacting support.

Çevrimiçi Kaynaklar: Ek ürün bilgileri, SSS ve destek için lütfen şu adresi ziyaret edin: BONTEC Brand Store.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.