LiitoKala Lii-600 Akıllı Evrensel LCD Hızlı Şarj Cihazı Kullanım Kılavuzu

1. Giriş

Thank you for choosing the LiitoKala Lii-600 Smart Universal LCD Fast Charger. This advanced charger is designed to provide efficient and intelligent charging, testing, discharging, and repair functions for various rechargeable battery types, including Li-ion (3.7V) and NiMH/Ni-Cd (1.2V) batteries. Its intuitive touch button interface and clear LCD display make it easy to monitor battery status and manage charging processes. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Güvenlik Bilgileri

• Use only the provided 12V 5A power adapter. Using an incorrect adapter may damage the charger or batteries.
• Şarj edilemeyen pilleri şarj etmeyin. Bu durum patlamaya, yırtılmaya veya sızıntıya yol açarak kişisel yaralanmalara veya maddi hasara neden olabilir.
• Pilleri şarj yuvasına yerleştirirken pil kutuplarının doğru olmasına (+/-) dikkat edin.
• Şarj cihazını suya, yüksek neme veya aşırı sıcaklıklara maruz bırakmayın.
• Şarj cihazını çalışma esnasında yanıcı maddelerden uzak tutunuz.
• Şarj cihazını sökmeyin veya değiştirmeyin. Tüm servis işlemlerini yetkili personele yaptırın.
• The charger features independent temperature detection for each slot. If a battery's temperature reaches 65°C (149°F), the charger will automatically reduce the charging current. If the temperature continues to rise, the current will drop to the lowest setting (250mA).
• Test results for internal resistance (mR) are for reference only and should not be used for commercial or official proof.

3. Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

• 1 x LiitoKala Lii-600 Battery Charger
• 1 x 12V/5A Power Adapter (US Plug)
• 1 x Kullanım Kılavuzu (bu belge)
• 1 x Car Cable

Image: Contents of the LiitoKala Lii-600 package, including the charger, power adapter, car charging cable, and user manual.

4. Ürün Özellikleri

• Hızlı Şarj: Maximum charging current of 3000mA per slot for rapid charging.
• Touch Button Interface: Responsive touch buttons with audible feedback for easy operation.
• LCD Ekran: Clear and comprehensive LCD shows voltage, current, capacity, internal resistance, temperature, and mode.
• Pil Kapasitesi Testi: Accurately measures the real capacity of batteries.
• Pil Onarım Fonksiyonu: Attempts to restore over-discharged batteries (success not guaranteed).
• Sıcaklık İzleme: Independent temperature sensors in each slot prevent overheating.
• Geniş Uyumluluk: Supports various Li-ion (3.7V) and NiMH/Ni-Cd (1.2V) battery sizes, including 18650, 26650, 21700, AA, AAA, 18490, 18350, 17670, 17500, 16340, RCR123, 14500, IMR, 10440.
• Four Independent Slots: Each slot operates independently, allowing different battery types and modes simultaneously.

Image: The LiitoKala Lii-600 charger demonstrating its ability to charge various battery types, including Li-ion and NiMH/Ni-Cd cells.

Image: The LiitoKala Lii-600 charger capable of accommodating up to four 26650 batteries simultaneously.

Image: Detail of the Lii-600's touch-sensitive 'MODE' and 'CURRENT' buttons, which provide tactile and audible feedback upon touch.

5. Kurulum

1. Gücü bağlayın: Plug the 12V/5A power adapter into the DC 12V input port on the back of the charger. Then, plug the adapter into a standard wall outlet. The LCD display will illuminate.
2. Pilleri Takın: Carefully insert one or more compatible rechargeable batteries into the charger slots, observing the correct polarity (+ and -) indicated on the charger. The charger will automatically detect the battery type (Li-ion or NiMH/Ni-Cd) and display initial information.

Image: Labeled diagram of the LiitoKala Lii-600 charger, indicating the DC 12V/5A input, LCD display, MODE and CURRENT buttons, battery slots, and temperature sensing points.

6. Kullanım Talimatları

The Lii-600 charger features two main touch buttons: "MODE" and "CURRENT".

• MOD Düğmesi: Used to select the operating mode (CHARGE, TEST, DISCHARGE, REPAIR). Press and hold for 3 seconds to enter mode selection.
• MEVCUT Düğmesi: Used to manually select the charging or discharging current.
• SLOTS Buttons (1, 2, 3, 4): Used to select individual battery slots for specific settings.

6.1. ŞARJ Modu

This is the default mode for charging batteries.

1. Insert the battery. The charger will automatically detect the battery type and enter CHARGE mode.
2. The charger will automatically distribute the charging current based on battery resistance.
3. To manually select the charging current (250mA, 500mA, 1000mA, 1500mA, 2000mA, 2500mA, 3000mA), press the "CURRENT" button repeatedly within 8 seconds of inserting the battery or selecting the slot.
4. The charging process will begin. The LCD will display real-time charging status.

6.2. TEST Mode (Capacity Test)

This mode measures the actual capacity of the battery. It involves a full discharge followed by a full charge.

1. Pili takın.
2. Press and hold the "MODE" button for 3 seconds to enter mode selection.
3. Press "MODE" repeatedly until "TEST" is displayed.
4. Press the "CURRENT" button to select the desired charging current for the test cycle.
5. The charger will first fully discharge the battery, then fully charge it, and finally display the measured capacity. This process takes time.

6.3. Boşaltma Modu

This mode discharges the battery to a safe low voltage.

1. Pili takın.
2. Press and hold the "MODE" button for 3 seconds to enter mode selection.
3. Press "MODE" repeatedly until "DISCHARGE" is displayed.
4. Press the "CURRENT" button to select the desired discharge current.
   • If charging current is 250mA, discharge current is 250mA.
   • If charging current is 500mA or 1000mA, discharge current is 500mA.
   • If charging current is 1500mA, 2000mA, 2500mA, 3000mA, discharge current is 750mA.
   • For Ni-MH batteries, discharge current is limited to 250mA or 500mA.
5. The battery will begin discharging.

6.4. REPAIR Mode

This mode attempts to repair batteries that have lost power or are deeply discharged.

1. Pili takın.
2. Press and hold the "MODE" button for 3 seconds to enter mode selection.
3. Press "MODE" repeatedly until "REPAIR" is displayed.
4. The charger will apply small currents and monitor voltage changes to attempt to restore the battery. This process may involve multiple cycles.
5. Not: There is no guarantee that the battery will be successfully repaired.

Image: The LCD display of the LiitoKala Lii-600 charger, providing detailed information on each battery slot, including current mode, voltage, capacity, internal resistance, and temperature.

7. Bakım

• Temizlik: Temizlemeden önce şarj aletini prizden çıkarın. Yüzeyi silmek için yumuşak, kuru bir bez kullanın. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
• Depolamak: Şarj cihazınızı kullanmadığınız zamanlarda serin, kuru ve doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak bir yerde saklayın.
• Havalandırma: Ensure the charger has adequate ventilation during operation. Do not cover the ventilation holes.

8. Sorun Giderme

9. Özellikler

Image: The underside of the LiitoKala Lii-600 charger, displaying its product label with input/output specifications and regulatory compliance marks.

10. Garanti ve Destek

LiitoKala bir teklif sunuyor. 12 aylık kalite güvencesi for the Lii-600 charger. This warranty is applicable only to Li-ion 3.7V and NiMH/Ni-Cd 1.2V batteries used with the charger.

For technical support, warranty claims, or any inquiries regarding your LiitoKala Lii-600 charger, please contact your retailer or visit the official LiitoKala webiletişim bilgileri için site.