giriiş
This manual provides essential information for the safe and efficient operation of your Faber Touchless Automatic Sanitizer Dispenser. Please read these instructions carefully before installation and use, and retain them for future reference. This dispenser is designed for use with alcohol-based liquid sanitizers only.
Paket İçeriği
Aşağıda listelenen tüm öğelerin paketinizde bulunduğunu doğrulayın:
- Faber Touchless Automatic Sanitizer Dispenser
- 1.5 Meter Power Cord (3-pin)
- Kullanım Kılavuzu (bu belge)
- Garanti Kartı
- Screw Bag for Wall Mounting
Ürün Bittiview
Şekil 1: Ön view of the Faber Touchless Automatic Sanitizer Dispenser.
Şekil 2: Dispenser dimensions: 30 cm height, 10 cm width, 13 cm depth.
Şekil 3: The dispenser features smart sensor technology for touchless operation, activating when a hand is placed beneath it.
Şekil 4: Key features include a durable stainless steel body, automatic dispensing mechanism, 1-liter capacity, and wall-mount design.
Şekil 5: The dispenser is constructed from high-quality Stainless Steel (SS 430) for durability and hygiene.
Şekil 6: Arka view illustrating the designated points for secure wall mounting.
Şekil 7: This product is manufactured in India.
Özellikler
| Özellik | Şartname |
|---|---|
| Model Numarası | AUTOMATIC SANITIZER DISPENSER 1L SS |
| Üretici Parça Numarası | 131.0630.297 |
| Malzeme | Paslanmaz Çelik (SS 430) |
| Renk | Paslanmaz çelik |
| Ürün Boyutları (U x G x Y) | 31U x 13.4G x 10.3Y Santimetre |
| Sıvı Hacmi Kapasitesi | 1 Litre |
| Çalışma Hacmitage | AC 230V |
| Güç Kablosu Uzunluğu | 1.5 Metre |
| Kurulum Türü | Duvara Monte |
| Ürün Ağırlığı | 1000 Gram |
Kurulum ve Yükleme
- Konum seç: Select a suitable wall location for mounting, ensuring it is within reach of a power outlet.
- Montaj: Use the provided screw bag to securely mount the dispenser to the wall. Refer to Figure 6 for mounting points on the back of the unit.
- Dağıtıcıyı Doldurun: Open the top cover of the dispenser. Carefully pour alcohol-based liquid sanitizer only into the reservoir. Do not overfill. Close the cover securely.
- Gücü bağlayın: Plug the 1.5-meter power cord into a standard AC 230V power outlet. The dispenser is designed for 'Plug & Play' operation.
- İlk Test: Place your hand under the sensor to ensure the dispenser is powered on and dispenses sanitizer correctly.
Kullanım Talimatları
The Faber Touchless Automatic Sanitizer Dispenser utilizes smart sensor technology for hygienic operation.
- Ensure the dispenser is filled with alcohol-based liquid sanitizer and connected to a power source.
- Place your hand flat and directly under the dispensing nozzle, within the sensor's detection range (refer to Figure 3).
- The sensor will detect your hand and automatically dispense a measured amount of sanitizer.
- Remove your hand once sanitizer is dispensed.
Important: This dispenser is designed for liquid sanitizer. Do not use gel sanitizers, soaps, or other viscous liquids, as this may cause malfunction.
Bakım
- Temizlik: Dış paslanmaz çelik gövdeyi yumuşak bir bezle silin.amp Bez. Cilaya zarar verebilecek aşındırıcı temizleyicilerden veya çözücülerden kaçının.
- Yeniden doldurma: When the sanitizer level is low, refill the reservoir with alcohol-based liquid sanitizer as described in the Setup section.
- Sensör Bakımı: Keep the sensor area clean and free from obstructions to ensure proper operation.
- Depolamak: If storing the dispenser for an extended period, empty the reservoir and clean the unit thoroughly. Disconnect from power.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Dispenser does not activate | No power; Sensor obstructed; Sanitizer level too low | Check power cord connection; Ensure sensor is clean and clear; Refill sanitizer reservoir. |
| Sanitizer flows continuously | Sensor continuously triggered; Internal blockage | Ensure no objects are near the sensor; Clean the sensor area; If problem persists, contact customer support. |
| Sanitizer is not dispensed, but power is on | Reservoir empty; Wrong type of liquid; Dispensing nozzle blocked | Refill with alcohol-based liquid sanitizer; Ensure only liquid sanitizer is used; Check and clear any blockage in the nozzle. |
| Dispensing amount is too small/large | Sensor sensitivity issue (not user adjustable) | Ensure hand is placed consistently under the sensor; If issue persists, contact customer support. |
Garanti ve Destek
This Faber Touchless Automatic Sanitizer Dispenser comes with a 1 yıl kapsamlı garanti on the product from the date of purchase.
For warranty claims, technical assistance, or any product-related inquiries, please contact Faber Customer Support:
Customer Service Helpline: 1800-209-3484
Please have your model number (AUTOMATIC SANITIZER DISPENSER 1L SS) and proof of purchase ready when contacting support.