UltraPro Z-Wave Plus Smart Light Switch (Model 54890) User Manual

1. Giriş

Thank you for choosing the UltraPro Z-Wave Plus Smart Light Switch. This device allows you to remotely control your lighting and create schedules for a wide range of fixtures when connected to a compatible Z-Wave hub. It features QuickFit and SimpleWire technologies for easier installation and enhanced reliability. This manual provides detailed instructions for installation, operation, and troubleshooting.

2. Güvenlik Bilgileri

• ELEKTRİK ÇARPMASI RİSKİ: Electricity can cause personal injury and property damage if handled improperly. All wiring must be performed by a qualified electrician or knowledgeable person.
• GÜCÜ KESİN: Always turn OFF the power to the circuit breaker or fuse box before installing or servicing this device.
• NÖTR KABLO GEREKLİDİR: This smart switch requires a neutral wire for proper operation. If your switch box does not have a neutral wire, consult a qualified electrician.
• İÇ MEKAN KULLANIMI SADECE: Bu cihaz yalnızca iç mekanda kullanıma yöneliktir.
• UYUMLULUK: Toplam su miktarını sağlayıntage of the connected load does not exceed the switch's maximum rating (120 watts).

3. Paket İçeriği

• 2 x UltraPro Z-Wave Plus Smart Light Switches
• Kullanıcı Kılavuzu

4. Özellikler

• QuickFit Design: Reduced housing depth (up to 20% less than previous Z-Wave models) and elimination of heat tabs make installation easier in older or crowded switch boxes.
• SimpleWire Technology: Auto-detecting line/load terminals simplify wiring by automatically identifying line and load wires. Dual offset ground ports support daisy-chaining.
• Z-Wave Plus Sertifikalı: Ensures compatibility with all Z-Wave certified hubs and devices.
• Integrated Repeater: Extends the range of your Z-Wave network.
• Ses Kontrolü: Compatible with Google Assistant and Amazon Alexa when connected to a compatible Z-Wave hub.
• Remote Control & Scheduling: Remotely turn lights on/off and create custom schedules via your Z-Wave hub.
• Çok Yönlü Uyumluluk: Works with all LED, CFL, incandescent, and halogen bulbs, as well as other devices.

This smart switch is compatible with various bulb types, including LED, CFL, incandescent, and halogen.

5. Kurulum ve Kurulum

5.1 Kurulum Öncesi Kontrol Listesi

• Verify that your switch box has a neutral wire (usually white).
• Ensure the power to the switch location is OFF at the circuit breaker.
• Confirm you have basic wiring tools (screwdriver, wire strippers).

5.2 Kablolama Talimatları

The UltraPro Smart Switch features SimpleWire technology for simplified wiring. The auto-detecting line/load terminals will identify the correct wires. Dual ground ports are offset to prevent interference with mounting screws.

1. Gücü kapatın: At the circuit breaker, turn off the power to the switch box you are working on.
2. Eski Anahtarı Kaldır: Carefully remove the existing switch from the wall box. Disconnect the wires, noting their original connections.
3. Kabloları Bağlayın: Connect the wires from your wall box to the UltraPro Smart Switch terminals as follows:
• Topraklama kablosu: Connect the bare copper or green wire from the wall box to the GROUND terminal.
• Nötr Tel: Connect the white neutral wire from the wall box to the NEUTRAL terminal.
• Hat/Yük Kabloları: Connect the black line and load wires to the LINE/LOAD terminals. The SimpleWire technology will automatically detect which is which.
• Seyahat Kablosu (3 yollu kurulumlar için): If installing in a 3-way configuration, connect the traveler wire to the TRAVELER terminal. (Requires an UltraPro add-on switch #39350, sold separately).
4. Güvenli Anahtar: Carefully fold the wires and push the switch into the wall box. Secure it with the provided screws.
5. Duvar plakasını takın: Duvar plakasını takın (ayrı satılır).
6. Gücü Geri Yükle: Turn ON the power at the circuit breaker. The blue LED on the switch should illuminate.

Wiring diagram for the UltraPro Z-Wave Plus Smart Switch, illustrating connections for ground, line/load, traveler, and neutral wires.

The switch supports both single-pole and multi-switch (3-way) configurations. Multi-switch setups require an UltraPro add-on switch (sold separately).

5.3 Boyutlar

Physical dimensions of the UltraPro Smart Switch, including depth, width, and height, shown in both inches and millimeters. Note the SmartStart QR code for easy pairing.

6. Kullanım Talimatları

6.1 Manuel Kontrol

• Açın: Press the top of the paddle switch.
• Kapamak: Press the bottom of the paddle switch.

6.2 Z-Wave Integration (Pairing)

To integrate your smart switch into your Z-Wave network, you will need a compatible Z-Wave hub. The switch supports SmartStart for simplified pairing.

1. Eşleştirme Modunu Etkinleştir: Put your Z-Wave hub into inclusion or pairing mode. Refer to your hub's instruction manual for specific steps.
2. SmartStart (Recommended): If your hub supports SmartStart, scan the QR code located on the switch or its packaging. The switch will automatically pair with your hub. The Device Specific Key (DSK) is also printed near the QR code for manual entry if needed.
3. Manuel Dahil Etme: If SmartStart is not available, initiate manual inclusion on your Z-Wave hub. Then, quickly press the top or bottom paddle of the UltraPro switch once. The LED indicator will flash to confirm inclusion.
4. Onay: Your Z-Wave hub should confirm successful pairing. You can now control the switch through your hub's interface.

6.3 Ses Kontrolü

Once successfully paired with a Z-Wave hub that supports Amazon Alexa or Google Assistant integration, you can use voice commands to control your lights.

1. Connect Hub to Voice Assistant: Follow your Z-Wave hub's instructions to link it with your Amazon Alexa or Google Assistant account.
2. Cihazları Keşfedin: Use the voice assistant app to discover new devices. Your UltraPro Smart Switch should appear.
3. Sesli Komutlar: You can now use commands such as:
• "Alexa, oturma odasının ışığını aç."
• "Hey Google, mutfak ışığını kapat."

Control your UltraPro Smart Switch using voice commands with Amazon Alexa or Google Assistant, requiring a compatible Z-Wave hub.

6.4 Remote Control and Custom Scenes

Through your Z-Wave hub's application, you can control your lights from anywhere and create custom scenes.

• Her Yerden Kontrol: Use your smartphone, tablet, or PC to turn lights on or off, or adjust schedules, even when you're away from home.
• Özel Sahneler: Program groups of hardwired fixtures for specific events, times, or moods. For example, a "Movie Night" scene could dim the lights, or a "Good Morning" scene could gradually brighten them.

Control your lighting from any smart device, including smartphones, tablets, or PCs, from any location.

Create custom scenes to program groups of hardwired fixtures for entertaining, events, or specific times.

7. Bakım

The UltraPro Smart Light Switch requires minimal maintenance. To clean, gently wipe the surface with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. There are no user-serviceable parts inside the switch.

8. Sorun Giderme

• Işık yanıp sönmüyor:
  • Devre kesiciden elektriğin geri geldiğinden emin olun.
  • Check wiring connections to ensure they are secure and correct (Line, Load, Neutral, Ground).
  • Ampulün çalıştığından ve doğru şekilde takıldığından emin olun.
• Switch does not pair with Z-Wave hub:
  • Ensure your Z-Wave hub is in inclusion/pairing mode.
  • Try moving the hub closer to the switch during pairing.
  • Reset the switch: With the switch LED glowing, quickly press the top paddle three times, then the bottom paddle three times. The LED will flash to confirm reset. Then attempt pairing again.
  • If using SmartStart, ensure the QR code is scanned correctly.
• Uzaktan kumanda çalışmıyor:
  • Confirm the switch is successfully paired with your Z-Wave hub.
  • Check your Z-Wave network's health and signal strength. The switch acts as a repeater, but obstacles can still affect communication.
  • Ensure your Z-Wave hub has internet connectivity if controlling remotely.

9. Özellikler

10. Garanti

UltraPro products are designed for reliability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the manufacturer's official webSite. Satın alma belgenizi garanti talepleriniz için saklayın.

11. Destek

If you encounter any issues or have questions regarding the UltraPro Z-Wave Plus Smart Light Switch, please refer to the troubleshooting section of this manual or contact UltraPro customer support. Contact information can typically be found on the product packaging or the manufacturer's webalan.