1. Giriş
The FLAMMA FS06 Digital Preamp Pedal is a compact guitar effects pedal designed to provide a wide range of amplifier tones. It features 7 distinct preamp models, built-in cabinet simulation, and the ability to save custom presets. This manual provides detailed instructions for setting up, operating, and maintaining your FS06 pedal.
Image 1.1: The FLAMMA FS06 Digital Preamp Pedal.
2. Paket İçeriği
- FLAMMA FS06 Dijital Ön Amplifikatöramp Pedal
- Hızlı rehber
- FLAMMA Logo Sticker
Image 2.1: Contents of the FLAMMA FS06 package.
3. Kurulum ve Bağlantılar
3.1 Güç Kaynağı
The FS06 pedal requires a 9V DC güç kaynağı with a current output of 303mA'den fazla. The power supply is not included. Ensure the correct polarity and sufficient current to prevent operational issues.
3.2 Connecting Your Pedal
The FS06 can be integrated into various audio setups:
- To a Guitar Amplifier's Power Amp: Connect the pedal's output to the power amp input of your guitar ampcankurtaran.
- Direct to a Power Ampkaldırıcı: Connect the pedal's output directly to a dedicated power ampcankurtaran.
- To an Audio Interface/Headphone Amplifier/Monitor Speaker/Mixer: Utilize the built-in cabinet simulation by connecting the pedal's output directly to these devices.
Image 3.1: Input jack of the FS06 pedal.
Image 3.2: Output jack of the FS06 pedal.
Image 3.3: FS06 connected to a mixer, utilizing cabinet simulation.
4. Operasyon
4.1 Kontrollerview
The FS06 pedal features several knobs and a footswitch for tone shaping and preset management:
- BAS: Düşük frekans tepkisini ayarlar.
- ORTA: Adjusts the middle-frequency response.
- TRE (Tiz): Yüksek frekans tepkisini ayarlar.
- SEVİYE: Genel çıkış hacmini kontrol eder.
- KAZANÇ: Aşırı yüklenme/bozulma miktarını ayarlar.
- SAVE SELECT Button: Used to select preamp models and save presets.
- Ayak pedalı: Toggles the pedal on/off or switches between preamp channels, depending on the selected mode.
Image 4.1: Control knobs and their functions.
Image 4.2: Footswitch functionality.
4.2 Öncesiamp Modeller
The FS06 offers 7 distinct preamp models, each designed to emulate classic and modern guitar amplifier tones. An LED indicator shows the currently selected effect.
| Sayı | İsim | Amp Model Basis |
|---|---|---|
| 1 | DELUXEBLUE | Based on Fender® Blues Deluxe |
| 2 | AC31 | Based on Vox® AC30 |
| 3 | CORAL REEF | Based on Two Rock® Coral |
| 4 | PLEX 50 | Marshall® Plexi 50'e dayalı |
| 5 | BLUE EYE 100 | Based on Friedman® BE-100 |
| 6 | MB 5th Gen | Based on Mesa Boogie® MARK V |
| 7 | HVE 5151 | Based on EVH® 5150 |
Resim 4.3: Üzeriview 7 önamp modeller.
4.3 Ön Ayarları Kaydetme
Her önamp model has two channels, allowing you to save a unique preset for each. To save your settings:
- Select your desired preamp model using the SAVE SELECT button.
- Adjust the BASS, MID, TRE, LEVEL, and GAIN knobs to your preferred settings.
- Press and hold the SAVE SELECT button until the LED indicator flashes, confirming the preset has been saved to the current channel.
This allows you to recall your customized tones instantly during performance or practice.
5. Bakım
FLAMMA FS06 pedalınızın uzun ömürlü ve optimum performans göstermesi için lütfen aşağıdaki bakım yönergelerini izleyin:
- Temizlik: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, which can damage the finish.
- Depolamak: Store the pedal in a dry environment, away from extreme temperatures, direct sunlight, and high humidity.
- İşleme: Pedalı dikkatli kullanın. Düşürmekten veya şiddetli darbelere maruz bırakmaktan kaçının.
- Güç: Pedal uzun süre kullanılmadığında daima güç kaynağının bağlantısını kesin.
6. Sorun Giderme
6.1 Ses Yok veya Zayıf Sinyal
- Güç Kaynağını Kontrol Edin: Ensure the pedal is connected to a 9V DC power supply with sufficient current (over 303mA). Insufficient current can lead to improper operation or no sound.
- Kablo Bağlantıları: Verify all audio cables are securely connected to the input and output jacks.
- Volume/Level Settings: Check the LEVEL knob on the pedal and the volume settings on your ampLifier veya ses arayüzü.
- Baypas Modu: If the pedal is in bypass mode, ensure your amplifier or other effects are functioning correctly.
6.2 Beklenmeyen Davranışlar
- Güç Döngüsü: Disconnect and reconnect the power supply to reset the pedal.
- Fabrika ayarları: Refer to the official FLAMMA website or contact support for instructions on performing a factory reset if issues persist.
7. Özellikler
| Özellik | Şartname |
|---|---|
| Model Numarası | FS06 |
| Ürün Ağırlığı | 10.5 ons (0.3 Kilogram) |
| Ürün Boyutları | 2.75 x 1.97 x 4.78 inç (7 x 5 x 12.1 cm) |
| Malzeme Türü | Metal |
| Güç Kaynağı | Kablolu Elektrik |
| Cilttage | 9 Volt Doğru Akım |
| Sinyal Biçimi | Dijital |
| Donanım Arayüzü | 1/4 inç Ses |
| Önamp Modeller | 7 |
| Saveable Presets | Yes (2 channels per preamp (model) |
| Kabin Simülasyonu | Dahili |
8. Garanti ve Destek
For warranty information, technical support, or further inquiries, please visit the official FLAMMA website veya doğrudan müşteri hizmetleriyle iletişime geçin. Garanti talepleri için satın alma kanıtı olarak satın alma makbuzunuzu saklayın.
FLAMMA Official Webalan: Amazon'daki FLAMMA Mağazasını ziyaret edin.