1. Önemli Güvenlik Talimatları
Read all instructions carefully before installing or operating this appliance. Keep this manual for future reference. Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons.
- Güç kaynağının ses seviyesiyle eşleştiğinden emin oluntagDerecelendirme etiketinde belirtilmiştir.
- Kurulum, tüm yerel yönetmelik ve standartlara uygun olarak, yetkili bir teknisyen tarafından yapılmalıdır.
- Do not operate the chimney if the power cord or plug is damaged.
- Never leave cooking food unattended, especially when using high heat.
- Yağ birikmesini ve yangın tehlikesini önlemek için yağ filtrelerini düzenli olarak temizleyin.
- This appliance is for domestic use only. Do not use it for purposes other than its intended use.
2. Ürün Bittiview
The Faber Hood STILUX 3D PLUS MAX T2S2 BK TC 90 is a 90 cm box-type kitchen chimney designed for efficient smoke and odor extraction. It features a sleek black finish, touch controls, and durable baffle filters suitable for Indian cooking conditions.
Image 1: Faber Hood STILUX 3D PLUS MAX T2S2 BK TC 90 Kitchen Chimney
3. Kurulum ve Kurulum
Professional installation is highly recommended for this wall-mounted chimney. Ensure the installation area meets the following requirements:
- Duvara Montaj: The chimney is designed for wall mounting above a cooking range. The wall must be strong enough to support the appliance's weight (approximately 12 kg).
- Kanalizasyon: Proper ducting is essential for effective ventilation. Ensure the duct pipe is of appropriate diameter and length, with minimal bends, to maximize suction efficiency.
- Güç Kaynağı: A dedicated 220V power outlet should be available near the installation point.
- Gümrükleme: Maintain adequate clearance between the cooking surface and the bottom of the chimney as per local safety regulations and manufacturer guidelines.
Image 2: General view of the Faber Chimney, illustrating its design for wall mounting.
4. Kullanım Talimatları
The chimney features an intuitive touch control panel for easy operation.
Image 3: Touch Control Panel for the Faber Chimney
4.1 Güç Açma/Kapatma
Basın Güç button (usually indicated by a circle with a vertical line) on the touch panel to turn the chimney on or off.
4.2 Adjusting Suction Speed
The chimney offers 3 suction speeds. Use the Hız +/- buttons to select the desired level of extraction. Higher speeds are recommended for heavy frying or grilling.
4.3 Operating the LED Lights
Basın Işık button (usually indicated by a light bulb icon) to turn the integrated LED lights on or off, illuminating your cooking area.
5. Bakım
Regular maintenance ensures optimal performance and longevity of your chimney.
5.1 Bölme Filtresinin Temizlenmesi
The 3 baffle filters are designed to effectively separate grease from cooking fumes. For best performance, clean the baffle filters every 6 months, or more frequently depending on usage.
- Kaldırma: Carefully unlatch and remove the baffle filters from the chimney.
- Temizlik: Soak the filters in hot water with a degreasing agent or dish soap. Scrub gently with a non-abrasive brush to remove grease buildup. Alternatively, some baffle filters are dishwasher safe (consult specific product details).
- Drying & Reinstallation: Ensure filters are completely dry before reinstalling them.
Image 4: Close-up of a Baffle Filter
5.2 Dış Temizlik
Wipe the exterior surfaces of the chimney with a soft cloth and mild detergent. Avoid abrasive cleaners or scouring pads that can damage the black finish.
6. Sorun Giderme
Yaygın sorunlar ve olası çözümleri için aşağıdaki tabloya bakın.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Chimney does not turn on | No power supply; loose connection; faulty switch | Check power plug and circuit breaker; ensure connections are secure; contact service if switch is faulty. |
| Düşük emiş gücü | Clogged filters; obstructed ducting; incorrect speed setting | Clean baffle filters; check ducting for blockages; select a higher speed setting. |
| Aşırı gürültü | Loose components; motor issue; improper installation | Check for loose screws or parts; ensure proper installation; contact service for motor inspection. |
| Işıklar çalışmıyor | Arızalı LEDamp; wiring issue | Check light button operation; contact service for lamp replacement or wiring inspection. |
7. Özellikler
Detailed technical specifications for the Faber Hood STILUX 3D PLUS MAX T2S2 BK TC 90 chimney.
| Özellik | Şartname |
|---|---|
| Marka | Yapan |
| Model Numarası | Hood STILUX 3D PLUS MAX T2S2 BK TC 90 |
| Ürün Boyutları (D x G x Y) | 51D x 90G x 90Y Santimetre |
| Renk | Siyah |
| Bitiş Türü | Siyah Kaplama |
| Hava Akış Kapasitesi | Saatte 1350 metreküp |
| Gürültü Seviyesi | 58 Desibel |
| Montaj Tipi | Duvara Montaj |
| Kontrol Tipi | Dokunmatik Kontrol |
| Cilttage | 220 Volt |
| Hız Sayısı | 3 |
| Işık kaynağı | LED (2x1.1 watts) |
| Filtre Türü | Baffle (3 filters) |
| Havalandırma Tipi | Kanallı/Havalandırmalı |
| Ürün Ağırlığı | 12000 Gram |
| Malzeme Türü | Alaşımlı Çelik |
| Dahil Bileşenler | 1 Chimney, 1 User Manual |
8. Garanti ve Destek
Faber provides comprehensive warranty coverage and customer support for your product.
- Ürün Garantisi: 1 year on the product from the date of purchase.
- Motor Garantisi: 10 years on the motor from the date of purchase.
- Müşteri Desteği: For any service requests, technical assistance, or warranty claims, please contact Faber customer care.
Faber Customer Care: 1800 209 3484
