Weiser Elements Square Single Cylinder Deadbolt Instruction Manual

giriiş

The Weiser Elements Square Single Cylinder Deadbolt is designed for use on exterior doors where key and security are required. This deadbolt can be locked or unlocked by a key on the outside or by the thumbturn on the inside. It features SmartKey re-key technology, allowing you to re-key the lock quickly and easily. This product is ANSI/BHMA Grade 3 certified, includes an adjustable latch for standard door preparations, and has a 1-inch deadbolt throw. Its universal door handling fits both right and left-handed doors, and it is ADA Compliant. It fits door thicknesses from 1 3/8" to 1 3/4" and comes in a Matte Black finish.

Paket İçeriği

Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

• Exterior Deadbolt Assembly (with key cylinder)
• Interior Deadbolt Assembly (with thumbturn)
• Sürgü Mandalı
• Grev plakası
• Montaj Vidaları
• 2 x Anahtar
• SmartKey Re-key Tool

Image showing the exterior and interior components of the Weiser Elements Square Single Cylinder Deadbolt, including the key cylinder and thumbturn.

Kurulum ve Yükleme

This section provides step-by-step instructions for installing your Weiser Elements Square Single Cylinder Deadbolt. Ensure you have the necessary tools before starting.

Gerekli Araçlar

• Yıldız uçlu tornavidalar
• Ölçüm bandı
• Kalem

Kapı Hazırlığı

1. Ensure your door thickness is between 1 3/8" (35mm) and 1 3/4" (44mm).
2. Verify the backset measurement (distance from door edge to center of bore hole) is either 2-3/8" (60mm) or 2-3/4" (70mm). Adjust the latch if necessary.

Mandalın Takılması

1. Insert the latch into the door edge, ensuring the bolt faces the correct direction for your door swing. The word "TOP" on the latch should face upwards.
2. Verilen vidalarla kilidi sabitleyin.

Dış Montajın Takılması

1. Align the exterior deadbolt assembly with the bore hole, ensuring the tailpiece passes through the latch mechanism.
2. Position the exterior assembly flush against the door.

Image showing the exterior side of the deadbolt with the keyhole and Weiser branding, ready for installation.

İç Mekan Montajının Takılması

1. Place the interior mounting plate over the tailpiece and secure it to the exterior assembly with the provided screws.
2. Attach the interior thumbturn assembly to the mounting plate, ensuring the thumbturn engages with the tailpiece.

Image showing the interior side of the deadbolt with the thumbturn lever, which controls the lock from inside.

Çarpma Plakasının Takılması

1. Align the strike plate with the latch bolt on the door frame. Mark and chisel out the area for the strike plate if necessary to ensure a flush fit.
2. Secure the strike plate with the provided screws. Test the deadbolt operation to ensure smooth locking and unlocking.

Kullanım Talimatları

Sürgüyü Kilitleme

• Dışarıdan görünüm: Insert the key into the keyway and turn it clockwise until the bolt extends fully into the strike plate. Remove the key.
• İç mekandan: Rotate the thumbturn lever clockwise until the bolt extends fully into the strike plate.

Deadbolt'un Kilidini Açma

• Dışarıdan görünüm: Insert the key into the keyway and turn it counter-clockwise until the bolt retracts fully. Remove the key.
• İç mekandan: Rotate the thumbturn lever counter-clockwise until the bolt retracts fully.

SmartKey Anahtar Değiştirme Teknolojisi

The SmartKey re-key technology allows you to re-key the lock quickly and easily by yourself. This feature is useful if you have recently moved, lost keys, or wish to use one key for multiple Weiser SmartKey locks.

1. Geçerli anahtarınızı takın ve saat yönünde 90 derece çevirin.
2. SmartKey aletini SmartKey deliğine tamamen ve sıkıca yerleştirin.
3. SmartKey aletini ve çalışma anahtarını çıkarın.
4. Insert your new key fully and firmly into the keyway.
5. Turn the new key 180 degrees counter-clockwise. Your lock is now re-keyed.

Diagram showing the steps for using SmartKey technology to re-key the deadbolt, including where to insert the reset tool and the key.

Bakım

• Clean the lock periodically with a soft, damp Kumaşı aşındırıcı temizleyicilerden, çözücülerden veya sert kimyasallardan uzak tutun; bunlar cilaya zarar verebilir.
• Do not lubricate the cylinder with oil-based lubricants. If lubrication is necessary, use a graphite-based lubricant sparingly.
• Periodically check and tighten all mounting screws to ensure the deadbolt remains securely installed and operates smoothly.

Sorun giderme

Özellikler

• Marka: Weiser
• Model Adı: Elements Square Deadbolt with SmartKey, Matte Black
• Parça Numarası: 9GDC94710-063
• Sona ermek: Mat Siyah
• Malzeme: Metal
• Kilit Tipi: Anahtar Kilidi (Tek Silindirli)
• Kapı Kalınlığı Uyumluluğu: 1 3/8" (35mm) to 1 3/4" (44mm)
• Sertifikasyon: ANSI/BHMA 3. Sınıf Sertifikalı
• Özel Özellikler: SmartKey Technology, Universal Fitment (reversible for right/left-handed doors), ADA Compliant, Limited Lifetime Warranty
• Öğe Boyutları (U x G x Y): 4.52 x 4.52 x 9.05 inç (yaklaşık paket boyutları)
• Ürün Ağırlığı: 1.4 pound

Garanti Bilgileri

The Weiser Elements Square Single Cylinder Deadbolt is backed by a Limited Lifetime Warranty. This warranty covers mechanical and finish defects under normal use. For complete details regarding warranty coverage, terms, and conditions, please refer to the official Weiser website or contact their customer support department directly.

Müşteri Desteği

For further assistance, technical support, or to inquire about replacement parts for your Weiser Elements Square Single Cylinder Deadbolt, please utilize the following resources:

• Resmi Webalan: Ziyaret etmek www.weiserlock.com for product information, FAQs, and support documentation.
• İletişim Bilgileri: Refer to the Weiser website for regional customer service phone numbers and email contact options.