Homra Nexo 72L Sensor Waste Separation System

1. Ürün Bittiview

The Homra Nexo 72L Sensor Waste Separation System is designed for efficient waste management with its multi-compartment structure and automatic sensor lid. This manual provides essential information for the proper setup, operation, and maintenance of your waste separation system.

Image 1.1: Homra Nexo 72L Waste Separation System

2. Kurulum Talimatları

2.1 Kutudan Çıkarma ve İnceleme

• Tüm bileşenleri dikkatlice ambalajından çıkarın.
• Verify that all parts are present and undamaged. Refer to the packing list for a complete inventory.

2.2 Pil Kurulumu

The sensor lid requires 6 AA batteries for operation. Ensure correct polarity when inserting the batteries.

1. Kapağın alt tarafındaki pil bölmesini bulun.
2. Pil bölmesinin kapağını açın.
3. Insert 6 AA batteries, observing the polarity markings (+/-).
4. Pil bölmesi kapağını sıkıca kapatın.

2.3 Yerleştirme

Position the waste separation system on a flat, stable surface. The unit is suitable for various indoor environments such as kitchens, living rooms, or offices.

Image 2.1: Anti-slip feet ensure stability

3. Kullanım Talimatları

3.1 Sensor Lid Operation (Upper Compartment)

The large upper compartment features an automatic sensor lid for hygienic, touch-free operation.

1. To open the lid, place your hand approximately 10-15 cm above the sensor located on the front of the lid.
2. Kapak otomatik olarak açılacaktır.
3. After a few seconds of inactivity, the lid will close automatically.
4. For manual control, use the 'OPEN' and 'CLOSE' buttons next to the sensor. Press 'OPEN' to keep the lid open, and 'CLOSE' to close it.

Image 3.1: Sensor and manual control buttons

Image 3.2: Hands-free sensor operation

3.2 Lower Compartment Operation

The lower compartment can be opened manually by pulling the drawer handle. It is equipped with wheels for smooth operation.

3.3 Waste Separation

The system is designed for efficient waste separation with multiple compartments:

• Upper Compartment (48 Litres): Ideal for general waste or recyclables. An inner ring secures the garbage bag in place. A 4-litre collection tray for green waste can be used here.
• Lower Compartment (2 x 12 Litres): Contains two separate inner containers, suitable for different types of recyclables such as plastic, paper, or glass. These containers are designed for standard 15-litre rubbish bags.

Image 3.3: Multi-compartment design for waste separation

Image 3.4: Soft-close lid mechanism

4. Bakım

4.1 Temizlik

The Homra Nexo is made from dirt-repellent and fingerprint-proof stainless steel, making it easy to clean.

• Dış yüzeyini yumuşak bir bezle silin.amp bez ve yumuşak deterjanla temizleyin.
• Yüzeye zarar verebileceğinden aşındırıcı temizleyicilerden veya sert kimyasallardan kaçının.
• The inner bins can be removed and washed with soap and water. Ensure they are completely dry before placing them back into the unit.

Image 4.1: Fingerprint-free stainless steel finish

4.2 Pil Değişimi

If the sensor lid becomes unresponsive or slow, it may be time to replace the batteries. Follow the steps in Section 2.2 for battery installation.

5. Sorun Giderme

• Lid not opening/closing automatically:
  • Check if the batteries are correctly installed and have sufficient power. Replace batteries if necessary.
  • Ensure there are no obstructions blocking the sensor or the lid's movement.
  • Clean the sensor area to remove any dust or debris.
• Lid making unusual noises:
  • Ensure the lid mechanism is clean and free from debris.
  • Do not force the lid open or closed manually when the sensor is active.
• Lower drawer not sliding smoothly:
  • Check for any debris or obstructions under the wheels.
  • Ünitenin düz bir yüzeyde olduğundan emin olun.

6. Özellikler

Image 6.1: Product Dimensions and Capacities

7. Garanti ve Destek

For warranty information or technical support, please contact the manufacturer, Homra, or your retailer. Keep your purchase receipt as proof of purchase.